The turbo on Willard was too small,
and we knew it.
Swapped in the biggest drop in option available,
and let the dyno do the talking.
564hp without touching,
a single injector or tune.
.
.
.
.
.
.
#DieselPerformance#DieselNation#DieselTrucks#Cummins#Duramax#PowerStroke #12Valve #24Valve #CommonRail #DieselSwap
2,000+ horsepower. Consistently.
Down the entire track.
That's the target for Myers' UCC build.
Weight reduction, chassis tuning,
and a power level the transmission can actually live with.
2025 taught the team a lot,
and it all gets put to the test this weekend.
This truck is about to be a different animal.
.
.
.
.
.
.
#DieselPerformance #DieselNation #DieselTrucks #Cummins #Duramax #PowerStroke #12Valve #24Valve #CommonRail #DieselSwap #UCC
This drive shaft should not exist on a truck like this.
Myer pulled a tube straight off a factory third-gen rear shaft,
threw it on the lathe, and kept cutting until he figured out,
how thick the wall actually was.
Spoiler: it's 3/16. The new one he replaced it with?
A semi-truck slip joint at 3.5 inch with .083 wall.
The whole thing tips the scale at 90 lbs.
This build is getting out of hand and we are here for it.
A grizzly bear almost ended the landing.
That wasn't even the scariest part.
This guy climbed into a Cessna with no interior panels,
exposed control cables, and a wing that felt like a pool float.
He couldn't even hear what was happening because his headset was dead,
watching the pilot's face go pale with zero idea why.
Then they dropped into the landing strip and nearly touched down on a grizzly.
The UCC build is getting out of
hand and we are here for it.
Full frame swap truck gets lifted axles pulled,
and this slides right underneath.
Built from 2x3x3/16 tubing with Pratt,
style trussing for maximum strength.
Drop your thoughts below,
especially if you actually,
design bridges for a living.
The 60-foot doesn't lie. Low 1.20s.
One of the best on the track that day,
across everyone running.
That's where races are won and lost,
and ours was working.
5.23 in the eighth @ 136mph.
Nitrous table thrown together,
a little prayer, and somehow,
every single pass was clean.
Now it's time to tear it down,
and learn what sled pulling is all about.
Our Memorial Day Sale runs May 21β25.
Get 10% off all Power Driven products.
Turbos, injectors, cylinder heads, AFC Live, air filters, fueling parts, and more.
If it says Power Driven, itβs included.