RIGHTWEIGHT

Interreg NWE project that will intensify the cooperation between automotive and aerospace sectors for reaching environmental and affordability targets.

[RIGHTWEIGHT @RIGHTWEIGHT2]

The next series of lectures to come from the RIGHTWEIGHT MOOC has been released!

In this edition, we have expert lectures from Pontis Engineering, @donkervoort and @Fontys covering a variety of topics. Watch all 3 lectures on the IPEK platform.
👉 https://t.co/nghDz3kgqL

[Polymeris @Pole_Polymeris]

[#JECWORLD2023] Final event for the @RIGHTWEIGHT2 project ! This is the opportunity to share and and discuss with consortium members.
Don't hesitate to come and meet us to learn more about this European project! 🇪🇺

@JECComposites @INTERREG_NWE #jecgroup #composites #plastic

[RIGHTWEIGHT @RIGHTWEIGHT2]

Very insightful discussions so far at the RIGHTWEIGHT final event, here is @FlandersMake explaining more about the challenges and solutions that were developed through the project 💡

Learn more about what was achieved in the project by joining us online 👉https://t.co/vwGVZWKZOA

[RIGHTWEIGHT @RIGHTWEIGHT2]

We now hear from @Pole_Polymeris summarising the work in WP1 Challenge Competitions & WP4 Voucher Scheme!

Join us to hear more about the successes from round 1 and round 2 challenges and the methods used to reach SMEs.

Join via 👉 https://t.co/vwGVZWKZOA
@INTERREG_NWE

[RIGHTWEIGHT @RIGHTWEIGHT2]

The RIGHTWEIGHT final event has started! 💡

@TPACNL is giving the introduction and welcome speech to start off the day. Join us here: https://t.co/pmt7XA83ea

@JECComposites I @INTERREG_NWE

[RIGHTWEIGHT @RIGHTWEIGHT2]

Partners will gather for the RIGHTWEIGHT final event tomorrow in Paris at the JEC Group!

We will be presenting the project outcomes, achievements and lessons learnt throughout RIGHTWEIGHT.

Join us via live stream tomorrow!

🗓 Tuesday April 25th 12:00 - 15:00

[RIGHTWEIGHT @RIGHTWEIGHT2]

Save the date for the RIGHTWEIGHT final event! 🚨

The RIGHTWEIGHT project will host its final event on April 25th from 12:00 - 15:00 in Paris alongside project partners.

More details will be announced soon as to how you can watch the event online and the agenda for the day.

[RIGHTWEIGHT @RIGHTWEIGHT2]

The next series of lectures to come from the RIGHTWEIGHT MOOC are from @FlandersMake!

Flanders MAKE discusses state-of-the-art technology in the two lectures.
1️⃣ Watch the lectures on Youtube: https://t.co/lhByBKHFug

2️⃣ Watch on the IPEK platform: 
https://t.co/nghDz3kgqL

[RIGHTWEIGHT @RIGHTWEIGHT2]

Join the next RIGHTWEIGHT webinar with @imast_district this Thursday from 11:00 - 12:30 💡

Details and registration are below 👇

#aerospace #lightweightmaterials

[IMAST District @imast_district]

🗓 16th March 2023 from 11:00 to 12:30 “Lightweight Composite Grid Structures for Aerospace Applications”. Join the webinar to discuss the advantages and disadvantages of the application by analyzing specific examples. Open for everyone.
➡ Register here: https://t.co/TEL7PVWics

[RIGHTWEIGHT @RIGHTWEIGHT2]

The next RIGHTWEIGHT webinar comes from @Automotive_NLD on the 29th of March 10:00 - 11:30am 💡

Student teams from the Eindhoven University of Technology from the solar and aero teams will present how they work and design with #lightweight materials.

👉 https://t.co/KnVkZ1jIc0

[RIGHTWEIGHT @RIGHTWEIGHT2]

New RIGHTWEIGHT webinar from @imast_district! Join the Lightweight Composite Grid Structures for #Aerospace Applications webinar on the 16th of March 11:00-12:30💡

Join the discussion! Registration: https://t.co/WI5ynJdFX3

[RIGHTWEIGHT @RIGHTWEIGHT2]

Next in the series of the RIGHTWEIGHT MOOC, we have three lectures from @imast_district!

1️⃣ Watch the lectures over on the RIGHTWEIGHT Youtube channel: https://t.co/ANlNE84u3O

2️⃣ The lectures are also available on the IPEK platform:
https://t.co/nghDz3kgqL

@INTERREG_NWE

[RIGHTWEIGHT @RIGHTWEIGHT2]

The next RIGHTWEIGHT webinar is from @imast_district on the 27th of February from 11:00am - 12:30pm on the holistic approach to sustainable materials in the #automotive sector 💡

Register here: https://t.co/S5MZNGJZNN

[IMAST District @imast_district]

🗓️ Mark your calendars! On 27th Feb at 11:00, we will be hosting a webinar on sustainable materials in the automotive sector. 🚘

We invite you to join us in collaboration with @RIGHTWEIGHT2 project!

Don't miss out this opportunity!
Register now! 📝
https://t.co/fwHw3X3VsD

[RIGHTWEIGHT @RIGHTWEIGHT2]

Next in the series of the RIGHTWEIGHT MOOC, we have three lectures from @TPACNL!

1️⃣ Watch the lectures over on the RIGHTWEIGHT Youtube channel: https://t.co/H3vJvuyr0j

2️⃣ The lectures are also available on the IPEK platform:
https://t.co/nghDz3kgqL

@INTERREG_NWE

[RIGHTWEIGHT @RIGHTWEIGHT2]

Join the upcoming RIGHTWEIGHT webinar hosted by @imast_district on "The holistic approach to sustainable materials in the #automotive sector"

🗓 When? 27th of February 11am - 12:30pm

Register here 👉 https://t.co/S5MZNGJZNN

#automotive #webinar

[RIGHTWEIGHT @RIGHTWEIGHT2]

The RIGHTWEIGHT project partners recently met in the offices of @Automotive_NLD to discuss the project's progress and to film some lectures for the MOOC series! You can view lecture 0 now by registering here 👉 https://t.co/DJeXAQOfFz

[RIGHTWEIGHT @RIGHTWEIGHT2]

Introducing the RIGHTWEIGHT MOOC lecture series 💡

Our RIGHTWEIGHT partners have reached out to their network to organise open online lectures to bring expert lightweight knowledge to this special series.

Find out more and register to the platform 👇https://t.co/pVQNZdfrK9

[RIGHTWEIGHT @RIGHTWEIGHT2]

Start the year in the RIGHT way! Join the RIGHTWEIGHT webinar hosted by IPEK Institute of Product Engineering on the 10th of January at 9:00am 💡

Agile and drive system development - how do they fit together? Learn how in our upcoming webinar!
Register: [email protected]

[RIGHTWEIGHT @RIGHTWEIGHT2]

Join the next RIGHTWEIGHT webinar hosted by IPEK Institute of Product Engineering at KIT on the 10th of January at 9:00am 💡

Agile and drive system development - how do they fit together? Learn how in our upcoming webinar!
Register via: [email protected]