Carry the sample mass into the next step.
With compatible instruments and communication settings, a RADWAG balance can send the weighing result to a titrator. This illustration follows the mass-data transfer.
Measure the difference between mass standards.
See how a RADWAG mass comparator uses an A-B-B-A sequence to compare a test weight with a reference, then summarizes repeated cycles.
Turn individual pieces into a measured series.
On compatible RADWAG balances with Mass Control enabled, the PA-04/H feeder supplies samples automatically while the system records their mass and summarizes the batch.
Know the net mass in the pack.
This RADWAG Packaged Goods Control example uses an average tare from empty packs to determine net mass in filled packs and summarize the batch. Requires a PGC-enabled weighing system.
Check volume through mass.
With a suitable RADWAG balance and calibration adapter, repeated weighings help assess delivered volume, accounting for environmental conditions. See the gravimetric method in action.
What changed in the sample?
Differential weighing on RADWAG 5Y balances compares the same sample before and after a process, showing the change in mass. See the two weighings side by side.
Known volume. Two weighings.
A RADWAG balance with a compatible density kit determines liquid density using a sinker of known volume, weighed in air and then immersed in the liquid.
Two weighings. One density.
See how a RADWAG balance with a compatible density kit determines solid density by weighing a sample in air and in a liquid of known density.
Keep the highest reading in view.
RADWAG Peak Hold mode retains the maximum measured indication above a set threshold, even as the load decreases. Watch the difference between the live reading and the held peak.
Count by weighing.
For parts of similar mass, use a reference sample to establish the average mass of one part. The balance calculates quantity from the total mass. See RADWAG parts counting in action.
See the pattern behind the readings.
RADWAG statistics functions summarize a series of weighings with the average, minimum, and maximum values. Watch how individual results become a clearer view of the series.
Within your limits?
RADWAG checkweighing compares each sample with your chosen lower and upper limits, showing whether its mass is below, within, or above the range. See the process in 24 seconds.
Weigh toward your target.
Set the target mass and tolerance, then add your sample manually while monitoring the balance. See how RADWAG dosing mode guides each addition, from tare to the final stable result.
Six questions. One analytical balance.
Discover how the RADWAG AS X7 supports parts counting, checkweighing, dosing, formulations, density determination with a dedicated kit, and animal weighing.
See six functions in 30 seconds. #RADWAG#LabEquipment
Calibrating a 12-channel pipette one channel at a time? That's about 6 hours. ⏱️
All three RADWAG AP-12 models do it in under 20 minutes.* The AP-12/12.5Y takes about 5.
AP-12.5Y · AP-12.1.5Y · AP-12/12.5Y
👉 https://t.co/Pw6KWY1zar
#PipetteCalibration#ISO8655#RADWAG
Did you know 21 CFR Part 11 compliance is not something a balance "does" by itself?
A balance can support the technical side of a controlled electronic-record workflow: user permissions, audit trails, electronic signatures, automatic logout, and record review.
But compliance depends on the complete process around the instrument: SOPs, validation, access control, training, backup, retention, and routine review.
The device supports the record.
The quality system controls the workflow.
Visit our full Article: https://t.co/K58hMLGYO2