Rob Holmes

[Rob Holmes @RobHolmes87]

@lingy_smith Yer we added to it. Nufab sourced a flighting extension that was welded to the existing auger.

[Rob Holmes @RobHolmes87]

@BradenBagley Haha. Unlike tyres they do give you a little warning they’re going to fail. At least you’ve had a chance to get organised.

[Rob Holmes @RobHolmes87]

@S_M_Bowman Yer that doesn’t look great. Unfortunately the product changes year on year, batch to batch. Haven’t spread any super potash this year, but made it work at those settings last year. 🤙🏽

[Rob Holmes @RobHolmes87]

@S_M_Bowman H discs.

[Rob Holmes @RobHolmes87]

@Scottymorgs1082 Our T8 runs with the Intelliview 4 (pro 700) removed. All tractor functions can be accessed through the A pillar. Had the Intelliview 4 swapped for a FM1000 when we purchased the tractor.

[Rob Holmes @RobHolmes87]

@BradenBagley @bentags I was mustering those hills last week and there are many gorges that Mufasa could have fallen to his dead (Or me on a motorbike).

[Rob Holmes @RobHolmes87]

@BradenBagley @Grahamkotzur @garyjlang_lang Short answers no. Only glitched a couple of times this harvest, think there is a software update meant to fix the problem.

Our MY19 was good. MY17 was terrible.

[Mingenew Irwin Group @GroupMIG]

Come and see our DIY Crop Tour on the road from Mingenew to Coalseam Conservation Park

#wanderoutyonder #AgEducation #watravel #wildflower #australianagriculture

[Rob Holmes @RobHolmes87]

@RobertKitto1 @Camso_co Had all our mid rollers (16) replaced by camso, as they started to delaminate at 2000hrs. Loss rubber on 10 of them within 200ha. All our dealings with Camso have been very good.

[Rob Holmes @RobHolmes87]

@FelixThunderduc @ipaddockapps Hi Chris, we had the front built by Nufab 3 years ago. It’s built from 3 write-off fronts. Works a treat.

[Rob Holmes @RobHolmes87]

@ipaddockapps Yer, I built it, so probably doesn’t help you much sorry. 😂

[Around the Traps Rural Photography @AroundRural]

Love it when this happens 📸 Was my favourite photo of the day #thereisalwaysone #eventphotographer #smilesaysitall

[Rob Holmes @RobHolmes87]

@troytsmith82 @Tedthekelpie McIntosh in Gero had a demo kit in their showroom a year or so ago. I assume they are/were reselling them.

[Rob Holmes @RobHolmes87]

@ipaddockapps Yep. Stalling the drum or broad elevator chain. The 60’ is very sensitive to changes in ground speed or crop yield. Easy to overwhelm it due to the amount of material it’s dragging in. Verio is set and forget, drive to engine load/losses.

[Rob Holmes @RobHolmes87]

@bentags @alan_manton Yep, we currently grow Twilight. Would like to get hold of some Butler

[Rob Holmes @RobHolmes87]

@bencrippsC97 RV2 is the pressure relief valve for the centre draper if you have a Parker valve block.