Better than Takom? This is ICM’s Panhard 178 AMD-35 COMMAND. A French SWW armoured vehicle. It’s a full interior kit with 59 steps. It also has something Takom doesn’t: colour call-outs (exercise caution) as you progress and complete the build; part details for the four variants.
A total contrast and a first: 1/72 Sopwith Camel (Academy). First WW1 aircraft ever. 5 steps and it’s ‘done’. Rigging will be needed along with some filler and sanding. Decals are simple but thick - easy with the Mr. Softer… A satisfying finish: more FWW aircraft on the horizon.
Terrible Takom strikes again. Calling this one “done”… Not just “complete” but “conned”/“can’t be bothered”. Final fit issues overwhelm what was looking like being a rather pleasing kit. It’s so bad that even the decals don’t fit. “Greif” by name, grief by nature. No more Takom.
Takom’s terrible tracks: part 2. 38 links (as per instructions) on the right side, but on the left?? 39 links are best. Still the sprockets are out of alignment. However, to obtain 38, it means realigning the sag on the left. This in turns misaligns the front wheels and tracks.😡
Takom’s terrible tracks… 38 links is correct and they kind of fit together flexibly-ish: until it’s time to join and fit them. The sprockets aren’t snug; that mis-aligns the road wheels. The links fall apart at the slightest touch. Once painted the fenders will cover everything.
The wheels are on…for now! Dry fitting to see if the track links work as stated. Takom reckon 38 links are needed per side. Currently 35…looks like another 3 should do it. One thing’s for sure: Takom’s fit issues have returned. The sprocket’s tight against the first road wheel.
@igluemodels All the more so given the scale and the size of the kit. Very worthy finishing; looks the part. Onwards and upwards from this point on. Next up?
Before completing the tracks… It’s not a bad idea to finish the wheels first. However, best not to forget that before adding the wheels, and losing access, some ‘make up’ should be pre-applied. Simple: dab on/ streak Tamiya Weathering Master Orange Rust, Metallic Grey and Rust.
@igluemodels The rigging is a fine achievement. 👍
A significant amount of PE at that scale and size of kit is going to be a real challenge. Handrails will already be a huge improvement. Masts would be next in difference. The good thing about waterline is how stable a ship kit ends up being.
Next step: the tracks… The main camouflage pattern work is done: airbrush with some hand painting using stippling effect to cover the Dark Yellow overspray. Further hand painting required for the details: Jerry-cans, wheel rims and the engine and fighting compartment interiors.
You’re on your own at this point. German Grey and Dark Yellow for sure. Though no guidance for the details: Engine block & engine compartment? Fighting compartment? Tracks? Radio? The missing parts of this Takom kit are the paint callouts. Other sources diverge on these aspects.
@igluemodels A typical method is to glue the rectangular flag graphic on aluminium foil; cut it out; fold it around the flag pole and glue tight. Once fully dried, then crease it to how you want it to be displayed.
Before it all ‘disappears’… Final small issues to cause just a little more grief: opaque ‘headlights’; PE “TP15” doesn’t match the instruction’s “TP15”; “TP5” Huh?; last but not least: will the real “TP12” make itself known: Is it the number plate holder or the gun stay holder🤔
The grief in the Greif… After the interior and radio, which is very delicate, it’s then onto a raft-full of details. It’s where this Takom kit falls short: opaque headlights, confusing instructions and a misshaped step-up plate. Though has anyone spotted something else already??
More Greif…No, the wheels and tracks (stages 3-7) haven’t fallen off: they’ll wait until the paint job. The engine, driver cab and interior (stages 9-16) are a snap. So, all is steady progress on Takom’s Rommel Half-Track: that is, until the hull lower sides are needed to go on.
Tackling Takom: Greif… the difficulties emerge early. Tiny, faint instructions have errors: p1: B1 (x3) which way round?; p2: the torsion bar orientation (inc. N20 on p3). Tyres (p7): which wheel type is correct? What’s the actual tread pattern? The tyre part orders are wrong.🤷♂️
Goodness Greif. Takom’s King Tiger failed to impress; this time? Box art looks great; insides full to the brim; great detail; really good quality plastic: a good start. Tiny instruction booklet, hard to read and complex drawings, mean the doubts start to creep in. Build quality??