SilverbackMachineRepair

We Specialize in installation, service, and repair of fabrication machinery and will provide you with the best service and quality.

[SilverbackMachineRepair @SilverbackMach]

We got a call for this old press brake that was having issues with the depth adjustment. We found that one of the contactors for FWD and REV wasn't functioning. We ended up swapping both of the contactors for them!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake

[SilverbackMachineRepair @SilverbackMach]

We had a customer call us out to troubleshoot a control issue on their Adira press brake. We found a break in one of the cables on the R-axis proximity sensors and decided to pull new cables on both R-axis and the X-axis proximity sensors due to the age of the machine!🦍🔧🇺🇸

[SilverbackMachineRepair @SilverbackMach]

This ironworker was having an issue not cutting the material the way it should. We rotated and gapped their blades so it would cut correctly! Can you tell a difference?🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacut

[SilverbackMachineRepair @SilverbackMach]

This S-drive roll former had a few broken gears from it being fed to thick of material. We replaced the gears along with some bad bearings and did a full maintenance and tune-up!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication

[SilverbackMachineRepair @SilverbackMach]

Finally received the new blades for this shear! Got them cleaned, installed, and the shear gapped for the customer!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade

[SilverbackMachineRepair @SilverbackMach]

One of our local customers had us look at their slitter on this Thalmann folder. We found 4 bad linear bearings, so we disassembled the slitter and replaced the linear bearings!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication

[SilverbackMachineRepair @SilverbackMach]

We calibrated this autobrake along with a tune-up. Let us help you take care of your machinery, and give us a call!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade

[SilverbackMachineRepair @SilverbackMach]

We installed a new set of scales on one of our local customers' press brakes after it was having issues referencing!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade

[SilverbackMachineRepair @SilverbackMach]

Our customers got a piece of material stuck in their shear, so we opened up the blade gap to get the material out, did a blade flip, and got it going again! This is why regular blade flips are important. Give us a call to flip or sharpen your blades!🦍🔧🇺🇸

#silverbackmachine

[SilverbackMachineRepair @SilverbackMach]

Did some repairs, normal tune ups, and some follow-up training on these two press brakes for one of our South Dakota customers. Replaced a counter balance valve and repaired a damaged motor coupler that was causing the back gauge to jam!🦍🔧🇺🇸

#silverbackmachine #metalfab

[SilverbackMachineRepair @SilverbackMach]

One of our local customers needed full maintenance on their Accurl shear. We drained and flushed the hydraulic system, ordered new LED lights, and pulled the blades to get them ground at the local grinding shop!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake

[SilverbackMachineRepair @SilverbackMach]

This HACO press breaks depth stop adjustment gears were worn out, got them replaced, and got it recalibrated!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade #plateroll

[SilverbackMachineRepair @SilverbackMach]

Had to swap a 3 phase motor for a 1 phase motor on this older mechanical ironworker. The customer didn't have 3 phase power, so we made the machine work on their 1 phase power!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication

[SilverbackMachineRepair @SilverbackMach]

Calibration, tune up, and training on this press brake and Delem control for our customer in Colorado! 🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade

[SilverbackMachineRepair @SilverbackMach]

Did some rearranging for our customers shop! Got their Cidan Autobrake moved, leveled, and calibrated!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade #plateroll

[SilverbackMachineRepair @SilverbackMach]

The vice on this saw had broken welds that were keeping it from clamping. We got it welded again, replaced the drive belt, and got them some new blade guides ordered! Give us a call so we can do what we know best...fix your machinery!🦍🔧🇺🇸

#silverbackmachine #metalfab

[SilverbackMachineRepair @SilverbackMach]

Calibration and training on this plate roll for our customer in Ohio!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade #plateroll #platerolling #platerollingmachine

[SilverbackMachineRepair @SilverbackMach]

Replaced the carbide blade guides along with the top and side blade guide bearings on this FMB Saw! Give us a call if your machines are making weird noises, and we'll get it back to normal!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #welding #metalfabrication #steelfab

[SilverbackMachineRepair @SilverbackMach]

We replaced the key pad on this saw due to heavy use of the function buttons, and the operator couldn't be happier! 🦍🔧🇺🇲
#silverbackmachine #metalfab #metalfabrication #plasmacutting #steelfabrication #machineshop #sheetmetalfab #machineservice #servicetechnician #serviceandrep

[SilverbackMachineRepair @SilverbackMach]

@Isaactremonti Thank you!

[SilverbackMachineRepair @SilverbackMach]

Repaired an electrical short in the emergency circuit and the foot pedal on this Schechtl autobrake!🦍🔧🇺🇸

#silverbackmachine #punchpress #metalfab #pressbrake #ironworker #welding #metalfabrication #plasmacutting #steelfabrication #machineshop #shearblade #plateroll