Splash Signal

Solana’s all-in-one trading terminal. Audits, bundle detection, narrative finder, alpha scanner & more.
CA: 7KCq1okEExdC7McjXvPA38pMTUCh69Gs9RV3Xbywpump

[Splash Signal @SplashSignal]

https://t.co/QaZ4wOeYRu

[Splash Signal @SplashSignal]

Splash Signal: Runners logic enhancement💧

The primary focus lately has been one thing: higher quality calls, fewer rugs, and more control in your hands. Here's everything that changed recently, in plain English.

Runner grades (A, B, C) now actually mean something. They're a live read on the odds that a call really runs. A is highest conviction, B is solid, C is momentum-only and low odds. Higher grade, better chance it works out.

How a token earns its grade is the important part. It's not just about pumping. A token climbs toward A by SURVIVING, by staying alive over time without collapsing. Going up doesn't automatically raise its grade, and a normal dip doesn't tank it. These coins are volatile, we expect them to wobble.

What we punish is a fast, deep collapse. That goes straight at the worst calls: the fast rugs. If a token craters 50, 70, 90 percent within minutes of signaling, the system now sees it dying and drops the grade hard. The strong ones that hold their ground keep climbing instead. Survival is the tell.

Tokens can also get upgraded. If a runner starts as a B and then proves itself by holding and strengthening, it gets bumped up to A and you get a short follow-up ping that it leveled up.

We didn't just guess at this. We backtested the new grading on two weeks of real signals. A-grade calls hit winners at roughly double the rate of the old blended average, and the C-grade calls (the ones we now flag or filter out) were almost all losers.

We're continuing to monitor the data, backtest, and iterate regularly. With more time and a larger sample to work from, accuracy and quality only get sharper from here. We’re just getting started.

[Splash Signal @SplashSignal]

Splash Alerts: the watchlist, upgraded💧

The old watchlist just held tokens. Splash Alerts watches them for you and pings the moment your conditions hit.

Paste a contract address and it finds the token (ticker, name, market cap, liquidity).

Add the price markers you want to get pinged at. Set as many as you like, and it fires the instant the cap crosses one, up or down.

Optionally, have it ping you only if the token holds above a level for X time, or stays between two levels for X time. Brief wicks won't set it off.

Your picks then show up as live Active watches, a board that tracks progress toward each trigger and glows when one's close to firing.

Up to 10 watches at once, each auto-cancelling after a while so the board stays clean.

[Splash Signal @SplashSignal]

Splash Signal ($SPIG) has been 10x boosted on Dexscreener! 💧

https://t.co/JcEDrt8v5t

[Splash Signal @SplashSignal]

Global State and Narrative X-Ray Dev Update 💧

Global State got a full data and design overhaul, and the star of it is the Narrative Trading Radar, which is now fully live on real data. It used to run on a news-velocity score that basically pinned every sector at 100 (not exactly helpful), so we tore that out and rebuilt it on real 24-hour sector momentum straight from CoinGecko. Every sector now gets a clean 0 to 100 score you can verify against CoinGecko yourself, and the whale-flow, alerts, and rotation feeds are all wired to live data too. We also squashed a sneaky bug where a data-shape mismatch was quietly zeroing out the global market numbers, so the top-line stats are trustworthy now.

Narrative X-Ray got a big rebuild plus a premium glass makeover. It now has two modes: Launch Radar, which groups fresh https://t.co/rSnpMKU0rB launches by the narrative they belong to, and Momentum Radar, a ranked board of which sectors are actually heating up right now with a one-click drilldown into the top tokens in each. The momentum scoring is real and verifiable (we checked it against CoinGecko and the numbers matched exactly). We also killed an annoying bug where the drilldown would fail to load under normal traffic, by pre-loading each sector's top tokens on the server so it's instant and never gets rate-limited.

[Splash Signal @SplashSignal]

@Layi_crypt_ Hey, We have one! 😁

https://t.co/sk0N0HEMlc

[Splash Signal @SplashSignal]

Splash Signal Dev Update💧

Rug Radar - Risk verdicts are sharper. Retuned how the scanner reads buy and sell pressure so it stops flagging healthy tokens as risky. Fewer false alarms, cleaner signal.

Launch Activity is live. Early-buyer retention and same-block bundle detection now populate properly on fresh launches.

Faster and steadier under load. Pushed a caching pass so the tools keep streaming smoothly with multiple tabs open and feeds running hot. No more panels blanking out.

Tighter behind the scenes. Hardened security on internal endpoints and added rolling cleanup of old login data, so your privacy stays tight.

Double-checked the numbers. Cross-referenced prices, market caps, and safety data against DexScreener, RugCheck, and CoinGecko. Matching up clean. And when something genuinely can't be verified, it tells you honestly instead of guessing.

[Splash Signal @SplashSignal]

Splash Signal X-Ray Update💧

We have been shipping a steady stream of upgrades to the X-Ray tools, with one goal driving all of it: data you can rely on. Every number in Token X-Ray and Wallet X-Ray should line up with what you would find on DexScreener, RugCheck, or the chain itself, and we went through them carefully to make sure it does.

Token X-Ray is sharper across the board. Holder concentration now reflects actual people, since pools and protocol accounts are filtered out cleanly, and funding traces show you where a holder's SOL came from, including when several wallets point back to the same source. Wallet X-Ray took the biggest leap: the portfolio, PnL, and recent activity all load smoothly now, the profit and loss numbers were rebuilt and independently checked against the chain (win rate included), you can search and filter any wallet's holdings instantly, and the whole tool got a fresh design with real color and depth.

In short, the X-Rays are faster, cleaner, and more accurate than ever.

[Splash Signal @SplashSignal]

BRO-ker partnership update💧

Splash Signal x @solbrocto is live.

BRO-ker is a multi-chain Telegram trading bot and we've plugged it straight into the app. Every token across Migrations, Runners, and the Signal Feed now has a one-tap BRO-ker button that opens the bot with the CA pre-loaded.

Try it 👉 @BRO_kerBot on telegram

This is just the first step in our long-term vision and plan for this collaboration.🤝

[Splash Signal @SplashSignal]

Splash Signal Dev Update💧

Hey everyone. Wanted to drop a quick update. We've been working on auditing the signaling logic across multiple tools on the platform. Here's some of what's been added, changed, and removed.

Smart money is now baked in. When wallets with a real track record of winning start buying a token, the scanner picks up on it and gives that token more weight.

Across the data we've accumulated so far, tokens still climbing 15 to 30 minutes after a call tend to be the real ones. So we'll be adding the ability to opt in and get a follow up ping that confirms a call is actually running. And when a token we flagged doubles from our call, you'll get a quick card showing the gain.

Calls now factor in who made the token. A creator with a solid history gets a small boost, and one with a pattern of rugs gets knocked down. Just one more thing weighed in.

We also added a market cap floor, so no more tiny dust tokens slipping into your feed. If you do want to see them, you can filter them back in with 'Lowcap Gambles' in the Runners tab.

A couple of fixes too. The one tap trade links now load the correct token every time, and the Amplified Approved list opens properly in X-Ray.

The whole point of this round was more real winners and less noise, and we're not done yet. More soon.

[Splash Signal @SplashSignal]

📄 Splash Signal White Paper v2 is live💧

We have shipped a lot, so we rewrote the paper to match where the platform actually is.

Solana moves faster than anyone can watch by hand. New tokens launch by the minute and smart money takes profit while everyone else is still reading the chart. Splash Signal reads the chain for you and surfaces the moves that matter as plain ENTRY, EXIT, and WATCH signals.

What is inside:
▲ 25 live modules across Discovery, Token Forensics, Smart Money, Risk, Signals, and Narratives
▲ Token X-Ray, an 8 stage forensic pass that ends in a clear verdict
▲ KillZone, a position risk simulator that prices in slippage and sell pressure before you ape
▲ Live feeds from Helius, Pump Portal, DexScreener, RugCheck, CoinGecko, and GDELT
▲ Every signal shows the token, the reason, and the on-chain evidence behind it

👉 Read it here: https://t.co/6e2klTB6jy

[Splash Signal @SplashSignal]

Narrative Tools Update! 💧

Renamed the three Narrative tabs under Macro Terminal so the names actually tell you what each one does.
- Attention Feed is now Narrative Brief (scan and stay informed)
- Narrative Intensity is now Narrative X-Ray (deep dive on one narrative, same vibe as Token X-Ray and Wallet X-Ray)
- Narrative Rotation is now Narrative Pulse (live monitor for what's heating up).

Brief got rebuilt to lead with news instead of stats, with a top-3 stories hero, sentiment color cues on every headline, and an Emerging banner that auto-detects narratives we didn't pre-define.

Pulse is where we went hardest. Stripped the vanity stats, added the ability to type any theme up top and track it as a custom narrative that saves across sessions. The Rising and Cooling cards now carry live headlines, hot tokens, a Reliability chip based on source breadth, and 24h sparklines. The headline feature is the new Token Spotted feed, which scans news for token mentions and cross-references on-chain launches, so when a story breaks and a matching token shows up on a DEX, you see them side by side. To keep noise out, every match has to pass at least one of four quality scans (market metrics, Amplified Approved, Runner engine, or live anomaly hit) before it shows up.

Also worth mentioning, Pulse used to take 30 to 60 seconds to load because of a caching bug, that's fixed and it now loads basically instantly after the first visit. Hop into Macro Terminal and check it out.

[Splash Signal @SplashSignal]

Amplified Approved Demo💧

Hey all, quick one to say thank you again to @AmplifiedBot, we're genuinely excited about this partnership and what it unlocks for our users. Sharing a quick video walkthrough of the Amplify integration across the Splash Signal platform so you can see it in action.

A couple things to highlight. We've got the dedicated Amplified Approved tab where you can browse the full curated list at any time, and throughout the rest of the site we've added clickable links that drop you straight into the Amplify trading bot so you can trade with leverage in just a couple taps. Any token that's been Amplified Approved also carries a visible pill marker right on its card, so you'll always know at a glance which tokens have made the cut.

[Splash Signal @SplashSignal]

Splash Signal Business Plan Update

We’re close to finalizing the full business plan and will be releasing it soon.

In the meantime, take advantage of the platform while access is still open. Token gating is the next major rollout, and the upcoming days may be the final window to use the tools freely.

Token holders will unlock a range of features and benefits once gating goes live, and we’re actively working toward completing subscription plan implementation alongside it.

If you want to get familiar with the platform, now is your chance. 💧

[Splash Signal @SplashSignal]

Full walkthrough “Runners”feature💧

Hey all,

I know I made public mention of the “Runners” tool released yesterday but I got some questions from the community as far as how it worked so I figured it made sense to do an explanatory demonstration of how the tool works.

This should make the use case more clear from a user perspective, not just a dev perspective.
I’ll make mention again that this tool is still in Beta and we will continue to backtest and improve the logic progressively.

Enjoy and ape safely!

[Splash Signal @SplashSignal]

@AmplifiedBot Looking forward to our continued work together 🤝

[Amplified Trading @AmplifiedBot]

Amplified x @SplashSignal

Today $SPIG becomes the first project to utilise our partner API, which provides them with more data to enrich their signal platform.

Amplified Approved means that the token passes our security metrics: bundle, clusters, holder distribution, LP lock/burn and social exposure metrics.

An approved badge will now be shown on tokens that pass our security screening & a live feed of approved tokens as they enter our system.

[Splash Signal @SplashSignal]

Amplified Trading partnership update.💧

We are excited to announce that we are officially partnering with @AmplifiedBot .

Amplified runs a Telegram bot for leverage trading on auto-screened Solana tokens. They approve each token through their in-house approval system so the tradeable list stays clean.

Amplified works by co-investing with you and boosting your trade value by up to 10x. You make the profit based on the full value and they take a trade fee.

Splash Signal is the first integration on their API, and we've plugged their full approved list into the app.

What that looks like: every token row across our dashboards shows an Amplified Approved badge when the token's been greenlit, a one-tap Leverage button opens the bot with the CA pre-loaded, and there's a dedicated live feed of new approvals.

The choice is yours, spot trade or Amplify your trades.

A portion of all trading volume from SPIG users on Amplified will go back into the $SPIG chart!

First build of many. More work with the Amplified team on the roadmap.

[Splash Signal @SplashSignal]

Dev update on Runners in Splash Signal.💧

'Runners' is a new feature we have added! It watches every new https://t.co/rSnpMKU0rB token and looks for momentum building before tokens actually run. The engine waits for several signals to fire at once (curve acceleration, volume spiking vs liquidity, heavy buy pressure, real price moves with volume behind them). When enough line up, it gets added to our 'runners' tab.

Still in beta and actively improving. Proceed with caution for now as we continue to backtest the logic and upgrade it overtime. Today's upgrades: the engine now spots anomaly patterns like collapsing exit liquidity or aggressive selling, and uses those to brake alerts before they push.

[Splash Signal @SplashSignal]

Quick update:

Moved the https://t.co/f9NoEOT0Pe live (Hunter scanner) feed over to the "Alpha" tab. Felt more at home there than buried under "Institutional tools."

Also opened it up to public access for now, visible the moment you launch the dashboard.

Question: Should I add a leaderboard that scores/ranks the recently pulled https://t.co/f9NoEOT0Pe launches, or is the current interface doing it for you? 🤔

Keep in mind there's already a handful of filters you can navigate through, which keeps the look and feel a bit more minimalistic and clean (imo).

[Splash Signal @SplashSignal]

Dev update 💧

Migrations panel is live

If you trade https://t.co/rSnpMKU0rB graduations, this one's for you. The Migrations panel watches bonding curves on https://t.co/rSnpMKU0rB in real time and surfaces tokens about to launch onto Raydium.

Three tiers:
🟡 Watching — 60%+ bonded
🟠 Imminent — 80%+ bonded
🔴 Critical — 92%+ or graduating in under 2 min

Urgency score = curve % + velocity. Higher = sooner.

Try it: Hit the Migrations tab on the dashboard.