Armed ASMR

Armed ASMR on YouTube!

[Armed ASMR @TheSilencerASMR]

Sitrep on Hi-Point:

- Still ugly

[Trijicon, Inc. @Trijicon]

It's #TTT! This month's prize is a Trijicon MRO. To enter to win, comment the correct answer and retweet this tweet. We'll randomly select a winner at the end of the month. Good luck!

[Armed ASMR @TheSilencerASMR]

@Trijicon D. 1 inch
!!!! Love Tactical Rifleman !!!!

[Armed ASMR @TheSilencerASMR]

@XankenileY The slide does rack fine without any magazine inside, though

[Armed ASMR @TheSilencerASMR]

@XankenileY hello! Any idea if these malfunctions are because of cycling live ammo, new 10-coil G17 springs or the 3-D printed G17 mags? I have the same problem with a Pmag too though but sometimes it cycles fine as well. Confused!

[Armed ASMR @TheSilencerASMR]

@XankenileY Thanks a ton! I’ll be going to the range tomorrow and that may help in figuring it out. Once I noticed that the same was happening with a Pmag, I also figured that the spring may not be the problem. Will keep in mind all that you said! Appreciated!

[Armed ASMR @TheSilencerASMR]

@XankenileY hello! Any idea if these malfunctions are because of cycling live ammo, new 10-coil G17 springs or the 3-D printed G17 mags? I have the same problem with a Pmag too though but sometimes it cycles fine as well. Confused!

[Armed ASMR @TheSilencerASMR]

@GLOCKInc Failures to extract with new magazine springs (G17 10 coil) in factory mag and 3-D printed mags. Pmag also not cycling all of a sudden. Other factory mags cycling fine. Pmag used to work fine. Factory mag with new spring used to work fine. “Old” spring not working now

[Armed ASMR @TheSilencerASMR]

@speech_code

[Armed ASMR @TheSilencerASMR]

@BoostWillis @BigTanGringo I don’t know maybe something is wrong with the gun itself or I’m just not Racking the slide with enough force because it’s happening with all my mags now but I don’t remember ever having this problem lol

[Armed ASMR @TheSilencerASMR]

@BoostWillis @BigTanGringo WTF it also seems to be happening with the factory Glock mag when I put a new spring into it (because I originally took the spring out of it to test the printed ones). Now the new spring isn’t working in it

[Armed ASMR @TheSilencerASMR]

@BoostWillis @BigTanGringo

[Armed ASMR @TheSilencerASMR]

Any ideas? @BigTanGringo @BoostWillis with the printed G17 mag & 10 coil factory Glock springs. Maybe need to hand-file the inside of the magazine, mainly front and back to allow more movement of the follower or...????

[Armed ASMR @TheSilencerASMR]

@BigTanGringo @BoostWillis

[Armed ASMR @TheSilencerASMR]

@SallyMayweather I hate that being “unarmed” is always pointed out, as if being armed is a reason alone to be killed

[Armed ASMR @TheSilencerASMR]

@LUAradio Thanks for doing what you do

[Armed ASMR @TheSilencerASMR]

@SallyMayweather Those doors are expensive! Too bad it’s tax money that will go towards them, anyway.

[Armed ASMR @TheSilencerASMR]

@speech_code @BoostWillis Changing the settings that I did really messed things up. Going from 60 to 50mm/s, 4 to 2 jerk, 800 to 600 acceleration and tightening the belts made the lines progressively shift off center and notice the line on bottom left corner of brim?

[Armed ASMR @TheSilencerASMR]

@BigTanGringo Changing the settings that I did really messed things up. Going from 60 to 50mm/s, 4 to 2 jerk, 800 to 600 acceleration and tightening the belts made the lines progressively shift off center and notice the line on bottom left corner of brim?

[Armed ASMR @TheSilencerASMR]

@BigTanGringo Hello! Have you seen this problem before? I’m printing Ivan’s G17 magazine and it’s misaligned in a couple places. Printing at 80% speed and it’s my first ever print. Looking for help!

[Armed ASMR @TheSilencerASMR]

@BigTanGringo Okay maybe I should look into checking the stepper driver voltage somehow lol one person I was talking with said one of theirs was low from the factory

[Armed ASMR @TheSilencerASMR]

@BigTanGringo It’s like all the acceleration values are 3000 except where it says accel it says 800 but I guess I just change where it says “accel”