Today we say thank you.
To every veteran who has served this country, and to the families who served right alongside them, thank you. That includes the veterans on our own team here in Dale, Indiana. We get to work beside them every day, and we’re better for it.
If you served and you’re now running a shop, cutting parts, or keeping a production line moving, we’re proud to build for you.
From all of us at #Thermwood, we honor you today and every day.
#VeteransDay #HonoringService #SupportOurVeterans #MadeInAmerica
The print gantry is on, and this LSAM 1020 is coming together. It’s getting optional Vertical Layer Print for parts up to 20 feet long, plus Angled Layer Print at 45°.
https://t.co/8chr4KRb1m
#Thermwood#LSAM
On at 7:00 a.m., off at 5:00 p.m., every day. “They run flawlessly,” says production manager Kelly Hoff. Dovetail Drawers of Texas: https://t.co/3JBwNH9YcX
We built the same drone layup tool two ways. Traditional: $8,500 and 10–12 days. Printed on LSAM: $5,539.50 and 3 days. That’s one of four tooling projects in our new roundup.
https://t.co/3XJ6qMnXUG
#CompositeTooling#AdditiveManufacturing#Aerospace
Customer Spotlight: C P & W, Benton, Arkansas
In 1999, Curtis Lowry bought his first CNC router from Thermwood Authorized Representative Bob Varwig. It was a Thermwood Model 40, and C P & W was a two-man shop. Darrel Jones joined the company as co-owner around the time that Model 40 arrived.
Twenty-seven years later, Bob was back in Benton for another delivery, this time alongside his son Kevin Varwig, who now leads the account as C P & W’s Thermwood Authorized Representative. This new Model 43 Workcell is the shop’s fifth Thermwood. Over the years they’ve run a Model 40, two Model 45s and two Model 43 Workcells. With this delivery, they now have a Model 45 and two Model 43 Workcells running side by side.
The team has grown too, from two people to about 25. C P & W builds frameless cabinets, cabinet doors, moulding and more for customers across the region.
Thank you to Curtis, Darrel and the whole C P & W crew for your loyalty since 1999. We’re proud to be part of your story!
https://t.co/nerHV46mtl
#Thermwood #CNC #CNCRouter #Cabinetmaking #Woodworking #MadeInAmerica #CustomerSpotlight
Every layer has a deadline. Thermwood LSAM uses Layer Time Control and a patented compression wheel to make sure each one bonds the way it should.
https://t.co/1NkR3O69NW
#LSAM#AdditiveManufacturing
Dr. Eduardo Barocio of Purdue University’s Composites Manufacturing and Simulation Center presented on large-scale additive manufacturing and the advantages of the Thermwood LSAM system for composites production during Day 2 of the AIRTEC International Supply Fair 2026 in Augsburg, Germany.
Visit Thermwood at Booth #M5200 (Hall 1) through Thursday to see the future of advanced manufacturing in action and talk with Dr. Barocio or our experts about how LSAM can improve your production process.
#AIRTEC2026 #Aerospace #Innovation #Composites #AdditiveManufacturing #LFAM #Thermwood @purduecmsc
Thermwood booth at the beginning of Day 1 of the AIRTEC International Supply Fair 2026 in Augsburg, Germany. Visit us through Thursday at Booth #M5200 (Hall 1) and see the future of advanced manufacturing in action.
Discover how Thermwood technologies are redefining production:
🔹 LSAM Additive Systems – Print and trim large-scale composite parts with unmatched precision
🔹 CutLayer Technology – Transform sheet materials into production-ready tooling and molds faster than ever
🔹 3 & 5 Axis CNC Systems – Proven solutions for aerospace, composites, plastics, and more
See how you can accelerate your tooling workflow and push manufacturing performance further with Thermwood.
#AIRTEC2026 #Aerospace #Innovation #Engineering #AdditiveManufacturing #LFAM #Thermwood
Can LSAM build a work of art? You Betcha.
In Episode 2, we 3D printed the Thermwood Welcome Desk on our LSAM 1020, then added a machined cedar top and an @eco_poxy pour.
Catch all the You Betcha episodes at: https://t.co/ue1H8U4Axy
#LSAM#3DPrinting#Epoxy
Happy #MFGDay! Thermwood has been building machines in Dale, Indiana, since 1969. Over more than five decades, our people have never stopped pushing into new technology, and today shops around the world trust us for our advanced CNC systems and large-scale additive manufacturing with LSAM, which we've been advancing over the last decade.
Different eras, different machines, same commitment: engineered, built, and supported right here at home by the people in these photos. Today we're celebrating them.
#ManufacturingDay #MadeInUSA #AdditiveManufacturing #Thermwood 🇺🇸
Day 5 of IMTS 2026 is done!
The LSAM AP 510 printed S-shaped end tables again in Airtech DAHLTRAM® T-100GF. 45 lb each, 3 hr 48 min per run. Booth #338350. CutLayer tools on display in #338387.
Tomorrow is your last chance to see us at IMTS!
#IMTS2026#LSAM@IMTSchicago@AirtechOfficial
Day 4 of IMTS 2026 is done and the booth was busy all day!
Eight S-shaped end tables off the LSAM AP 510 in Airtech DAHLTRAM® T-100GF. 45 lb each, 3 hr 48 min per run. Booth #338350.
Same print again tomorrow. CutLayer tools on display in #338387. Come see us!
#IMTS2026 #LSAM @IMTSchicago@AirtechOfficial
LSAM and CutLayer can solve some of the same large scale manufacturing challenges, but the process is completely different.
LSAM builds with large-scale thermoplastic composite extrusion. CutLayer builds from CNC-machined layers assembled into the final geometry.
In this video, I break down how both systems work, where each fits, and what separates them.
If you’re at IMTS, come talk to the product managers and get into the technical details.
#IMTS2026 #Thermwood #LSAM #CutLayer #AdditiveManufacturing #AdvancedManufacturing
Day 4 at IMTS 2026 starts now!
The LSAM AP 510 is printing S-shaped end tables in Airtech DAHLTRAM® T-100GF. Four at a time, eight today, 45 lb each, 3 hr 48 min per run. Booth #338350.
Large CutLayer tools on display in Booth #338387.
#IMTS2026#LSAM@IMTSchicago@AirtechOfficial
Day 3 of IMTS 2026 is done and Booth #338350 was crowded all day!
The LSAM AP 510 ran the drone body layup tool again. 252 lb, 7 hr 23 min, SABIC LNP™ THERMOCOMP® DC004XXAR1.
Tomorrow and Friday: S-shaped end tables in Airtech DAHLTRAM® T-100GF, 8 total printed LIVE each day. Come check it out!
#IMTS2026 #LSAM @IMTSchicago@SABIC
SOUND ON. THE REVEAL IS HERE. 🔥
See what THERMWOOD has been working on—then see it up close at IMTS.
📍 Booths 338350 & 338387
📅 September 14–19, 2026
Watch the trailer. Meet us on the show floor.
#THERMWOOD#IMTS2026@IMTSchicago
Day 2 of IMTS 2026 is done, and it was busy.
The LSAM AP 510 printed a two-sided drone body layup tool live in Booth #338350. Four parts, 252 lb, 7 hr 23 min. Booth #338387 had several large CutLayer tools on display.
More of both tomorrow. Stop by.
#IMTS2026#LSAM@IMTSchicago@purduecmsc
Day 2 at IMTS 2026 starts soon!
Scott Vaal is in Booth #338350 with the LSAM AP 510, printing a two-sided drone body layup tool live from SABIC LNP™ THERMOCOMP® DC004XXAR1. Jody Wilmes is in Booth #338387 with multiple CutLayer tools on display. Both are there with our sales team to help answer your questions.
#IMTS2026 #LSAM @SABIC@purduecmsc@IMTSchicago