We review air quality products. We buy them and test them under the same conditions to compare performance. Our tests reveal what manufacturers won’t tell you.
In a bid to replace falling ad revenue, big media publishers are inundating the web with bad product recommendations you can’t trust.
Google is killing independent sites like ours through inaction.
We hope to still be here to see things change:
https://t.co/3TxALxD4V8
First production run of the Polaris Mark II (Slim) assembled and tested, luckily we got all the measurements right!
The Mark II uses 3M Filtrete 20x20x1 MPR1900/2200 filters which are widely available.
Our first run is just about sold out. #airpurifier#indoorairquality
Sans is one of the most heavily advertised air purifiers on the internet, but is it any good?
We bought one to test it and find out.
▶️ https://t.co/YPTPfOgiwQ
We are pleased to announce a major redesign of our Polaris air purifier. Slimmer and easier to assemble, it is now sized to accept the very popular 20x20x1 3M Filtrete MPR1900/2200. This is a test sample in raw aluminum prior to powder-coating. #airpurifier#IAQ
I just get a review. From the picture I can see the bag for 3Pro could also work for 5Pro. Anyone who still have the link can share it in the comments.
Hi Nathalie, apologies for the delay but we’ve had a challenging few weeks and keeping up with platforms like X was deprioritized. When the device was released, the figure was shared by those testing CADR at the time so we included it in our review because it was the only third-party figure available. This was also before we started calculating CADR and when the bulk of our comparisons came from “time to PM1 zero” inside our test room. Once we implemented CADR calculations, our own CADR figures were added to the review so room size recommendations and ranking metrics are tied to our own CADR data. Hope this information helps with what you’re looking for.
Hi Nathalie, apologies for the delay but we’ve had a challenging few weeks and keeping up with platforms like X was deprioritized. When the device was released, the figure was shared by those testing CADR at the time so we included it in our review because it was the only third-party figure available. This was also before we started calculating CADR and when the bulk of our comparisons came from “time to PM1 zero” inside our test room. Once we implemented CADR calculations, our own CADR figures were added to the review so room size recommendations and ranking metrics are tied to our own CADR data. Hope this information helps with what you’re looking for.
1/CO₂ sensor tests.
Accuracy of 8 CO₂ sensors estimated against the Aranet4
(AirGradient ONE, AirSpotHealth, Qingping Air Lite, Qingping Air Monitor Pro 2, Temtop M10+ (2 of them), VisiblAir Model C, Inkbird Plus and Temtop C1)
Protocol, roughly: the sensors are aired out outdoors for 45 minutes before the test starts.
Did 2 accuracy tests.
Each test has 2 phases. In the "CO₂ rising" phase, I sit with the sensors in my small bathroom for 30 minutes, 1 m from me. In the "CO₂ falling" phase, I place the sensors outside on my balcony for 30 minutes.
Here are the raw results of the first test I ran, in the bathroom
next tweet, results once returned outdoor, on the balcony 👇🧵
In online shopping today, the hardest part is getting the first thirty reviews. Without sales, there are no reviews; but without reviews, it's very hard to get sales. If you could purchase the 5Pro on Amazon and provide an honest review, it would help me a great deal.
I just got an AirFanta 5Pro a few days ago. Does it really fit in a carry on suitcase, and is it quiet? Yes, and it can be very quiet at lower fan speeds but is a bit noisy on max fan speed.
I ordered the 5Pro because I wanted an efficient whole room air purifier that is packable. I've already got a number of air purifiers I can fit in a suitcase, but none of them have really high airflows like the 5Pro does with it's 4 filter, CR Box-style configuration.
CADR
At max fan speed, the 5Pro has an AHAM registered Clean Air Delivery Rate of 379 cubic feet per minute for smoke in an 8' high room that's 587ft². That's 4.8 air changes per hour, or a smoke-free room in 12.4 minutes - I've not tested the CADR myself, but the testing is certified by AHAM on their website. You'll get higher air changes per hour in a smaller room, and fewer in a larger one.
https://t.co/PwAuEqtdRj
Packability
When disassembled, the stack of 5Pro parts is well under 8" high and fits in to my carry on suitcase, or even a shopping bag - just not a TJs bag because they are fairly narrow.
Unlike a regular CR Box, the filters are inserted into plastic panels that form the sides of the 5Pro, making for a nicer looking and more durable design that can be assembled and disassembled quickly and securely. The panels have magnets for quick alignment, and all 4 filter panels are the same, so assembly is easy.
When the 5Pro's top, bottom and sides are disassembled the stack parts is under 8 inches total. However, the filters are exposed on one side of the panels, subject to potential damage during transport if not handled carefully. The stacked 5Pro doesn't fit into my suitcase if I add the foam included in the original packaging in between the layers of filters. I've stacked the filters with the grills outward to protect them, but that does leave them rubbing filter to filter in the stack.
I generally check my bags when flying, but without being able to fit in the foam packing that the 5Pro ships with, I'd be reluctant to trust the bare stack as checked baggage in my soft-sided suit case. Your suitcase may have more room than mine since mine has the roller-bag extending handles nested on the inside of the suitcase rather than on the outside, and your luggage may have harder, more protective sides.
The fit and finish of the 5Pro is good. The included 12V power supply is compact. And the control knob is simple to use - push to turn on or off, and rotate for different fan speeds. The fan speed percentage is shown on the display.
Noise Levels
There is a built in particle counter and an optional auto mode based on particle count, but for me my sleep is less disturbed if fan noise, even if relatively quiet, is continuous rather than intermittent. So I'm more likely to use the manual mode. But I like that there is a built in particle counter and auto mode option.
The noise levels have a wide range. At 25% fan speed, the sound levels are too quiet for me to measure since the room I tried out 5P in had 34 dB ambient noise levels. The reported SPL for 25% fan speed is 28.5 dB, and it is very quiet. The CADR at that speed is 72 CFM.
Sound becomes noticeable, but still pretty quiet at 45% fan speed, with a reported 39.5dB at a CADR of 174 CFM. (For comparison, the durable Nukit Tempest Pro has a CADR of 222 CFM at 37dBA, but it doesn't fit in a carry on suitcase.)
Fan noise is annoying at the max fan speed. It's not just the volume, which isn't that loud at its reported 53.1dB, but the whine of the 4 fans sounds like a loud desktop computer on turbo mode with fans pouring on the speed to cool down the CPU - it's a different sound than a larger single fan air purifier. However, you can choose your prefered sound levels / CADRs.
AirFanta has published CADRs for the 5Pro's entire fan speed range in the FAQ "What is the smoke CADR, power and noise level in different fan speed?" near the bottom of the page.
https://t.co/bySscKHg4O
Overall, the 5Pro has delivered on it's promises. It has high airflow and packability all in the same unit. I wish the max fan speed was a bit more pleasant sounding, but there is the option to turn the fan speed down for quieter operation at lower CADRs. Shipping in the US was very fast, just a couple of days. YMMV.
It will take time to tell how durable and reliable the 5Pro is in the long run.
YouTube short with fan speed sound level examples at the link in the next comment.
Not a sponsored post.
@Mediprincess 🙌 It’s great to hear you’re pleased with it! We’ve been running ours in different rooms of the house with good results. Now running a new round of CADR/sound/energy tests on the second unit to confirm results before shooting our video review.
It’s hard to tell because every Corsi-Rosenthal box will be different as people build them with different box fans and different filters.
Just to give you an idea, here’s a comparison of results for our particle removal speed test VS noise levels at full power between our two CR boxes (each using different fans and filters) and our AirFanta 3Pro (the sibling of the 5Pro).
Both CR boxes are loud and power-hungry, and they are much bigger than the 3Pro (which is similar in size to the 5Pro) - see the images for comparison.
It’s hard to tell because every Corsi-Rosenthal box will be different as people build them with different box fans and different filters.
Just to give you an idea, here’s a comparison of results for our particle removal speed test VS noise levels at full power between our two CR boxes (each using different fans and filters) and our AirFanta 3Pro (the sibling of the 5Pro).
Both CR boxes are loud and power-hungry, and they are much bigger than the 3Pro (which is similar in size to the 5Pro) - see the images for comparison.
Full AirFanta 5Pro review coming soon!
We’ve been using it at home for just over four months to test everything about it.
Currently running the bedroom test 💤
AirFanta 5Pro Officially Launched: Two Years in the Making, Fully Evolved
We are excited to announce the launch of our new air purifier, the AirFanta 5Pro, following two years of design and manufacturing.
The 5Pro has been redesigned based on the structure of the 3Pro, with improvements across the board: it looks better and is easier to install.
In terms of performance, the CADR remains outstanding. Measured in an AHAM-certified laboratory, the results are as follows:
PM2.5: 393 CFM
SMOKE: 379 CFM
DUST: 408 CFM
Pollen: >450 CFM
We are also applying for AHAM and ENERGY STAR certification.
In addition, the 5Pro now features a PM2.5 sensor and display, as well as an Auto mode. When disassembled, it can still fit into a 20-inch suitcase, making it easy to carry and store.
For purchase links and more information, please click the link below:
https://t.co/ZKpPI6rDPY
It is currently available for purchase in the United States, Canada, Europe, the United Kingdom, Australia, and countries across East Asia and Southeast Asia.