windkit

the first #openhardware windturbine 🍦

[windkit @Windkit_cc]

estimated tech. specs of windkit:
rotor diameter 2.2 Meter
rated power 400 Watt
an. power production 500 kWh/a @ 4 m/s
system voltage 12, 24, 48 Volt
#opensourcehardware #windturbine #lowtech #robust #righttorepair #renewables #offgrid #prototype

[windkit @Windkit_cc]

The wind took us...
Somewhere in the fediverse... 🌀
You can catch us here https://t.co/BCEBEa2PxE

[windkit @Windkit_cc]

Unser erster Prototyp ist endlich fertig und möchte ausgiebig getestet werden. Mit deiner Hilfe wollen wir das WINDKIT aufs Testfeld bringen! Dafür haben wir eine Crowdfundingkampagne bei Startnext gestartet. Wir freuen uns sehr um jede Unterstützung!
https://t.co/m4nnTuYGH4

[windkit @Windkit_cc]

@ohsummit Thanks for taking care!

[windkit @Windkit_cc]

Yeah our datalogger demo dashboard is online 😍 This is a first proof of concept of the datalogger receiving 'important' 😝 weather data from our #ecowitt WS80 via RF 868 and sending it via MQTT to the dashboard! Have a look here: https://t.co/tlxS7yR3rY

[windkit @Windkit_cc]

All code and hardware designs are open and can be found at https://t.co/HVyGEeJgqK and https://t.co/rpiE1mVxfc.

[windkit @Windkit_cc]

Last weekend we had our workshop on the Windkit datalogger 😊 The datalogger was assembled and tested. There are still some bugs to be fixed and the code is not ready yet, but a big step has been taken. Thanks goes out to the @GOSHCommunity for funding this event ✨

[windkit @Windkit_cc]

@arturo182 just received the pcb yeaah!

[windkit @Windkit_cc]

@arturo182 just the latest :D
we're building a datalogger to monitor our open hardware small wind turbine. the datalogger is equipped with an esp32, sd card slot, RTC, OLED display, RF module to measure and receive voltage, current, windspeed, frequency, winddirection, yeah!

[windkit @Windkit_cc]

@Tombeau1972 @tvanlint @marchionatus haha 😘

[windkit @Windkit_cc]

@tvanlint @Tombeau1972 @marchionatus with windkit we are taking on the challenge of developing a small wind turbine that is recyclable and thus setting an example of circular design in the energy sector 💫

[windkit @Windkit_cc]

🎧 @netzbasteln interviewed us at the Open Hardware Forum 🥰 Listen to the episode at @dlfnova https://t.co/ZXdUEWNHXH . Hear us from minute 10! 🎧 (German only)

[windkit @Windkit_cc]

Why the hell do people always attach their homemade wind turbines to cars? Instead of driving around and wasting petrol, use a data logger to find out more about the turbine's performance!

[windkit @Windkit_cc]

It was a lot of fun to get to know the community and make open hardware more visible. #FOH23 was a small glimpse into the future, let's stay tuned to make it a reality 💫
Thanks for having us and for organizing this event @okfde 🤗

#opensourcehardware #righttorepair

[windkit @Windkit_cc]

@staranov @okfde @Hen_Litta @LillyBlaudszun @Fuerstenberg_ @BMUV :D

[windkit @Windkit_cc]

@VDI_BB_SQP Hey da seit ihr bei uns genau richtig, vielleicht sehen wir uns auch auf dem Forum Open Hardware?
Grüße

[windkit @Windkit_cc]

there will be a physically compiled version of windkit, down from the repo, right into the center of berlin. bring your lightbulps, openhardware will power it!
#openhardware #gitclone #FOH23 #PowerRangers #renewables #powertothepeople #WorkinProgress

[windkit @Windkit_cc]

thanks for the lovely illustration @ermelchen 🤗

[windkit @Windkit_cc]

Yeah, we will be part of the #FOH23 Forum Open:Hardware https://t.co/sXvk00Ekjj , have a look at the schedule (only in german) !