BehindTheCode with Gerry

Digital Electronics Technician & YouTuber with a passion for digital interfacing. Tinkering with 90’s era electronics & Retro Videogame Development kits.

[BehindTheCode with Gerry @_BehindTheCode]

Shown here are some of the Retro Game Development kits I’ve covered on my channel over the years.

Some I have yet to tackle, and many more new acquisitions have been added into the arsenal. It’s going to be a fun summer.😎🤘#Nintendo #Atari #gamedev #n64 #gamecube #3DS #gameboy

[BehindTheCode with Gerry @_BehindTheCode]

@BoscoMac That’s awesome!🤘
Do tell…Which programming language did you use? And which API’s ?

Very cool stuff.
😎👌

[BehindTheCode with Gerry @_BehindTheCode]

@mov_axbx If you’re able to take photos of the clip as well, that would be good to have on file just for the archives.

I have not been able to find even a single decent photo of one of these clips online.😵‍💫

[BehindTheCode with Gerry @_BehindTheCode]

@mov_axbx Ohh wow!😮
that would be amazing.🤩🤘

[BehindTheCode with Gerry @_BehindTheCode]

To top it off…I found a TurboGrafx16 flash card with JJ & Jeff still loaded on it. 😄👌

[BehindTheCode with Gerry @_BehindTheCode]

The NEC TurboGrafx-16 😎🤘

Game: Final Lap TWIN (Circa ~1990)
Console + TurboBooster-Plus adapter
#NEC #TurboGrafx16 #retrogaming

[BehindTheCode with Gerry @_BehindTheCode]

@_BehindTheCode Yep, no prob whatsoever, very glad to do this. I have a few broken ones myself that I want to replace too.

In fact I'll give you a model, just give me a few days to get to drawing it up.

[BehindTheCode with Gerry @_BehindTheCode]

Dude!…… A Fellow #SGI ONYX owner.
Noice! 😎🤘

[Nathan Odle @mov_axbx]

For anyone wondering what machine all my MIPS R8000 LLM kernel optimization posts are about, it’s the one on the right.

SGI Power Challenge Deskside, maxed out:
6x 90MHz MIPS R8000 CPUS
2GB RAM

Maybe I will do a tour post soon and talk about the R8000.

[BehindTheCode with Gerry @_BehindTheCode]

@mov_axbx Hey chief,
I’m hoping you might be able to toss me some photos of the side panel support clips from your ONYX or from the Challenge? 🙏🤞🏻

The small plastic clips that hold the side panel skins.

I had all x24 that are issued with the Onyx Deskside model and ai had them in a ziplock when transporting it. The bag was lost in transit. So I’m hoping to possibly 3D Print some to replace them. (I think these clips are the same for both Onyx and Challenge.)

I’ve been trying to source replacement parts but as you can imagine, SGI Onyx parts are not easy to come by.

Any chance you could take some photos of one of the clips?
Front & back view with ruler 📏 for reference? 🙏🤞🏻

It would be awesome to potentially 3D print some replacements.😎👍

[BehindTheCode with Gerry @_BehindTheCode]

@308Greenfield You bet.👍
I’ve never had any issues with the 4 boards I got a, and they are still running just fine.
5 years and counting. So I think you’ll be good.😄👌

[BehindTheCode with Gerry @_BehindTheCode]

@palantirheart An old black top pushbutton. These were a “normally closed” pushbutton switch. The red top ones were “normally open”.😎👍

[BehindTheCode with Gerry @_BehindTheCode]

You walk into a Goodwill thrift shop somewhere in Seattle, and see these Ultra rare N64 Dev items just sitting there in a discount bargain bin!!!
😳🤯🤘

What do you do?
#Nintendo #N64 #gamedev #retrogaming

[BehindTheCode with Gerry @_BehindTheCode]

There was also the N64 SoundTools Development Cartridge Hardware Demo I did a while back. You can check it out here if that peaks your interest.😎👌
Link below:👇
https://t.co/2ZG8wVicpe

[BehindTheCode with Gerry @_BehindTheCode]

@PARORAINBOW1208 👀👇
https://t.co/LUGh2nRrbX

[BehindTheCode with Gerry @_BehindTheCode]

@EdTheNerd Woa!😮👌.... dude.
That is sick!

[BehindTheCode with Gerry @_BehindTheCode]

You spot a Sega Dreamcast Katana Development kit out in the wild…🤯🤘

What do you do?🤔
#Sega #Dreamcast #KATANA #gamedev

[BehindTheCode with Gerry @_BehindTheCode]

For those of you who are curious, I did a Deep dive hardware and software demo on the Full Partner-N64 Development cartridge...and the 64DD Devkit.
Video link is below: 👀👇

https://t.co/nffZKa7A3d

[BehindTheCode with Gerry @_BehindTheCode]

@EricTrauman Yep! I concur.🤔They'd likely smash and propel through the windows in full tactical gear. So make sure to wear safety glasses.😄lol

[BehindTheCode with Gerry @_BehindTheCode]

@knorrium Lol 😂

[BehindTheCode with Gerry @_BehindTheCode]

@CabanonGH lol

[BehindTheCode with Gerry @_BehindTheCode]

@CyberSpartanII OOoooo😮👌
Nice! Good thinking! I should try that next time. lol

[BehindTheCode with Gerry @_BehindTheCode]

@DaJanTRO Haha! 😄👌
Nice!

[BehindTheCode with Gerry @_BehindTheCode]

@VintageFeelsFL Lol…😄😂👌