AIRPOXY Project

#H2020 🇪🇺 project introducing thermoset #composites for the #AeronauticSector which are easily processed, repaired and even #recycled. @EU_H2020

[AIRPOXY Project @AIRPOXY]

On 31 August, our project officially ended. Read the farewell message from the project coordinator @CIDETEC_ Surface Engineering on behalf of the consortium👇https://t.co/UH4So61uVo
#composites #thermosets #SkinOfThings #H2020 #SustainableAviation

[AIRPOXY Project @AIRPOXY]

📢 New AIRPOXY publication in 'Polymers' from @CIDETEC Surface Engineering: Aero Grade Epoxy Vitrimer towards Commercialization. In open access 👇https://t.co/5kJDQHB5jb

[AIRPOXY Project @AIRPOXY]

🆕Publication in Applied Sciences (#MaterialsScience and Engineering): "3R #Composites: Knockdown Effect Assessment and Repair Efficiency via Mechanical and NDE Testing"
https://t.co/kF96ZsHbPp

[AIRPOXY Project @AIRPOXY]

📹The recording of the AIRPOXY public workshop, 'Trends in composites materials to maintain European leadership in aeronautics', is available! The 11 presentations cover new materials, manufacturing, and sustainability. https://t.co/veV7iJOQ1r #Composites #SkinOfThings #Polymers

[AIRPOXY Project @AIRPOXY]

Project coordinator @CIDETEC_ Surface Engineering is presenting project results and demos at @IndTech2022 in Grenoble. This is a great opportunity to showcase the project in an excellent research and industrial-driven environment!

[AIRPOXY Project @AIRPOXY]

"Design, production and characterization of high performance 3R composites based on dynamic chemistry for the aerospace industry" - published by @cidetec and @eurecat in @AEMAC_'s review ➡
https://t.co/PMTFSGBI06

[AIRPOXY Project @AIRPOXY]

❗ Publication of the CEN Workshop Agreement 'Test method for the evaluation of the adhesive properties of fibre reinforced polymer composite joints' initiated by AIRPOXY ➡ https://t.co/nBTzrfBAqs @Standards4EU @NormasUNE #standardisation

[AIRPOXY Project @AIRPOXY]

📢The AIRPOXY Public Workshop, hosted by @CIDETEC_ Surface Engineering, takes place this morning in San Sebastian! We are pleased to share the results of the project with stakeholders of the #composites sector. Monitor this page for the recording of the event! #ResearchImpactEU

[AIRPOXY Project @AIRPOXY]

[🔔 REMINDER - AIRPOXY Public Workshop]
You can register to attend the AIRPOXY Public Workshop - 𝐓𝐫𝐞𝐧𝐝𝐬 𝐢𝐧 𝐜𝐨𝐦𝐩𝐨𝐬𝐢𝐭𝐞 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐭𝐨 𝐦𝐚𝐢𝐧𝐭𝐚𝐢𝐧 𝐄𝐮𝐫𝐨𝐩𝐞𝐚𝐧 𝐥𝐞𝐚𝐝𝐞𝐫𝐬𝐡𝐢𝐩 𝐢𝐧 𝐚𝐞𝐫𝐨𝐧𝐚𝐮𝐭𝐢𝐜𝐬 - before 23 May 2022.

[AIRPOXY Project @AIRPOXY]

📢 Join us in San Sebastian (Spain) on 15/06 for the AIRPOXY Public Workshop - 𝐓𝐫𝐞𝐧𝐝𝐬 𝐢𝐧 𝐜𝐨𝐦𝐩𝐨𝐬𝐢𝐭𝐞 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐭𝐨 𝐦𝐚𝐢𝐧𝐭𝐚𝐢𝐧 𝐄𝐮𝐫𝐨𝐩𝐞𝐚𝐧 𝐥𝐞𝐚𝐝𝐞𝐫𝐬𝐡𝐢𝐩 𝐢𝐧 𝐚𝐞𝐫𝐨𝐧𝐚𝐮𝐭𝐢𝐜𝐬! Programme & registration: https://t.co/Oq6G2ALWSS

[AIRPOXY Project @AIRPOXY]

📢 Join us in San Sebastian (Spain) on 15/06 for the AIRPOXY Public Workshop - 𝐓𝐫𝐞𝐧𝐝𝐬 𝐢𝐧 𝐜𝐨𝐦𝐩𝐨𝐬𝐢𝐭𝐞 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐭𝐨 𝐦𝐚𝐢𝐧𝐭𝐚𝐢𝐧 𝐄𝐮𝐫𝐨𝐩𝐞𝐚𝐧 𝐥𝐞𝐚𝐝𝐞𝐫𝐬𝐡𝐢𝐩 𝐢𝐧 𝐚𝐞𝐫𝐨𝐧𝐚𝐮𝐭𝐢𝐜𝐬! Programme & registration: https://t.co/Oq6G2ALWSS

[AIRPOXY Project @AIRPOXY]

📢The CEN Workshop initiated by partners @NormasUNE & University of Ioannina, 'Test method for the evaluation of the adhesive properties of fibre reinforced polymer composite joints', developed its 1st draft CWA. Commenting until 13/05 👉 https://t.co/GnQw2v3F4a @Standards4EU

[AIRPOXY Project @AIRPOXY]

🆕[Open-access publication in 'Polymer']
Study into the Mechanical Properties of a New Aeronautic-Grade Epoxy-Based Carbon-Fiber-Reinforced Vitrimer. Co-authors: @Eurecat_news @CIDETEC_ @EireComposites @IDEC_aero
https://t.co/ulhWJg5lgy

[AIRPOXY Project @AIRPOXY]

🆕PUBLICATION in Composites Part A
"Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer composites". Co-authored by partners at Leibniz-Institut für Verbundwerkstoffe GmbH and @CIDETEC_ Open access👇https://t.co/OvR5O9fJ9L

[AIRPOXY Project @AIRPOXY]

🔹 Project update 🔹
Environmental, economic and human health risk assessment
Preliminary HHRA calculations comparing the conventional and AIRPOXY technologies show that the new 3R resins are less toxic than the ones previously employed (epoxy resins).
https://t.co/tWVisdtnvE

[AIRPOXY Project @AIRPOXY]

🔹Project update🔹
Validation of technologies in an industrial environment
Two demonstrators, which are subcomponents of real aircraft structures (fan cowl and leading-edge), have been designed and manufacturing of the elements is underway. Details 👇
https://t.co/TWL57QYJeR

[AIRPOXY Project @AIRPOXY]

The article 'Reprocessable, repairable and recyclable epoxy resins for composites' published in @CompositesWrld covering AIRPOXY's research has been selected as one of the magazine's top 10 pieces of the year! 👏https://t.co/4oADyb80bD

[AIRPOXY Project @AIRPOXY]

🔹Project update 🔹
The work concerning structural health monitoring and development of 3R-Repair technologies led by University of Ioannina was successfully finished.
Details 👇
https://t.co/KRbZK1duVo

[AIRPOXY Project @AIRPOXY]

🔹Project update🔹
Development of 3R-Bonding technologies
Both adhesive bonding and welding processes have been studied and optimized. Bonding processes and toolings for 3R adhesive bonding and 3R welding have been defined and designed. Details 👇
https://t.co/NRo8jg03T3

[AIRPOXY Project @AIRPOXY]

🔹Project update🔹
Good results were achieved in the thermoforming of fully cured, carbon fiber-reinforced 3R laminates. Processes such as continuous compression molding and discontinuous compression molding were investigated. Details👇 https://t.co/lmQLa9oclm

[AIRPOXY Project @AIRPOXY]

Our newsletter is out! https://t.co/SV4MZ26GBm
✈️Development of 3R-Thermoforming, Bonding & Repair technologies
✈️Validation in an industrial environment
✈️Environmental, economic & human health risk assessment
✈️Dissemination, standardisation, certification & commercialisation