๐๐ ๐ฐ๐ข๐ฅ๐ฅ ๐๐ ๐๐ญ ๐๐๐๐ฌ๐ก๐จ๐ซ๐ ๐๐๐๐ก๐ง๐จ๐ฅ๐จ๐ ๐ฒ ๐๐จ๐ง๐๐๐ซ๐๐ง๐๐ ๐๐๐๐.
Our team will be on-site to engage with operators and service providers working on inspection challenges in offshore and hard-to-access environments. If you are attending and want to discuss UAV-enabled NDT or robotic inspection workflows, feel free to connect.
In parallel, we are contributing to a technical paper at OTC in collaboration with BP, Houston, TX: โ๐๐๐จ๐ฏ๐-๐๐๐ญ๐๐ซ ๐๐ข๐ฌ๐๐ซ ๐๐ข๐ฌ๐ฎ๐๐ฅ ๐๐ง๐ ๐๐๐๐ ๐๐ง๐ฌ๐ฉ๐๐๐ญ๐ข๐จ๐ง ๐๐ฌ๐ข๐ง๐ ๐ ๐๐๐ซ๐ฌ๐ฎ๐ฉ๐ข๐๐ฅ ๐ ๐ฅ๐ฒ๐ข๐ง๐ ๐๐จ๐๐จ๐ญ ๐ฐ๐ข๐ญ๐ก ๐๐๐-๐๐๐ฉ๐ฅ๐จ๐ฒ๐๐ ๐๐ข๐ง๐ข ๐๐ซ๐๐ฐ๐ฅ๐๐ซโ
The paper presents a practical approach to one of the most constrained inspection scenarios - above-water riser piping under offshore platform decks - where access, safety, and data quality are persistent limitations.
Key points from the work:
- UAV-deployed magnetic crawler enabling 360ยฐ close visual inspection and EMAT thickness measurements
- Operation in GPS-denied underdeck environments with stable positioning and controlled deployment
- Parallel data acquisition (visual + EMAT) at locations previously inaccessible to conventional methods
- Offshore proof-of-concept demonstrating measurement correlation with manual UT and reliable deployment/retrieval
The system combines aerial mobility with surface-level NDT to reduce reliance on rope access while maintaining inspection rigor.
If you are attending OTC and would like to review the paper or discuss applications, reach out to coordinate a meeting.
Get in touch to schedule a meeting with us:
https://t.co/Ta6AnfMunm
#otc2026 #ndtdrone #utdrone #crawlerrobot #inspectiondrones #inspectionrobots #industrialdrones #offshoredrones
๐ ๐ผ๐๐ ๐ก๐๐ง ๐ฑ๐ฟ๐ผ๐ป๐ฒ๐ ๐ณ๐ฎ๐น๐น ๐๐ต๐ผ๐ฟ๐ ๐ผ๐ป ๐ฟ๐ผ๐๐๐ถ๐ป๐ฒ ๐ถ๐ป๐๐ฝ๐ฒ๐ฐ๐๐ถ๐ผ๐ป๐.
Surface condition and physical access remain the primary constraints. Many systems stop at visual inspection or attempt UT on unprepared surfaces, while others cannot scan areas behind piping, within structural bays, or above obstructions due to reach limitations.
๐ฆ๐ธ๐๐ฟ๐ผ๐ป ๐ฎ ๐จ๐๐ฉ ๐ถ๐ ๐ฏ๐๐ถ๐น๐ ๐๐ผ ๐ผ๐ฝ๐ฒ๐ฟ๐ฎ๐๐ฒ ๐๐ต๐ฒ๐ฟ๐ฒ ๐๐ต๐ผ๐๐ฒ ๐น๐ถ๐บ๐ถ๐๐ฎ๐๐ถ๐ผ๐ป๐ ๐๐๐ฎ๐ฟ๐ ๐๐ผ ๐ฏ๐ฟ๐ฒ๐ฎ๐ธ ๐๐ผ๐ฟ๐ธ๐ณ๐น๐ผ๐๐.
๐ฆ๐๐ฟ๐ณ๐ฎ๐ฐ๐ฒ ๐ฝ๐ฟ๐ฒ๐ฝ๐ฎ๐ฟ๐ฎ๐๐ถ๐ผ๐ป - ๐ณ๐ฟ๐ผ๐บ ๐ถ๐ป๐๐ฒ๐ด๐ฟ๐ฎ๐๐ฒ๐ฑ ๐๐ผ ๐ต๐ฒ๐ฎ๐๐-๐ฑ๐๐๐
Skyron 2 goes beyond basic contact inspection by supporting both light and heavy surface conditioning: ๐๐๐๐๐ ๐๐ถ๐ข๐ญ enables light preparation with integrated UT, while ๐๐๐๐๐๐๐ ๐๐ณ๐ฆ๐ฑ ๐๐ is designed for dedicated pre-inspection passes. A high-torque wire brush with automated pressure and stand-off control ensures consistent removal of rust and scale - preparing surfaces for reliable measurements.
๐๐ฐ๐ฐ๐ฒ๐๐ - ๐ฏ๐ฒ๐๐ผ๐ป๐ฑ ๐๐ต๐ฒ ๐ฑ๐ฟ๐ผ๐ป๐ฒโ๐ ๐ฝ๐ต๐๐๐ถ๐ฐ๐ฎ๐น ๐ฒ๐ป๐๐ฒ๐น๐ผ๐ฝ๐ฒ
With the ๐๐๐๐๐ ๐๐ฆ๐ข๐ค๐ฉ arm, inspection is no longer limited by where the UAV can position itself:
- UT measurements behind piping and structural members
- Access to recessed and confined areas
- Inspection of elevated surfaces above grating or catwalks
This extends contact inspection into areas typically requiring scaffolding or rope access.
๐ฉ๐ฒ๐ฟ๐๐ฎ๐๐ถ๐น๐ถ๐๐ ๐ฏ๐ ๐ฑ๐ฒ๐๐ถ๐ด๐ป, ๐ป๐ผ๐ ๐ฐ๐ผ๐บ๐ฝ๐ฟ๐ผ๐บ๐ถ๐๐ฒ
Rather than a fixed configuration, Skyron 2 uses a modular payload architecture to adapt to inspection requirements โ from surface preparation to contact UT/EMAT/DFT and extended-reach measurement.
Get in touch to schedule a meeting with us:
https://t.co/uK335XA5Ip
#DroneInspection #IndustrialInspection #UAVTechnology #DroneTechnology #InspectionTechnology #TetheredDrone #RemoteInspection #IndustrialDrones #AssetIntegrity #NDTInspection #Innovation #ModularUAV
Avestec Technologies will be participating in Web Summit Vancouver on May 13, 2026.
During the Tech Showcase, we will present our latest UAV and robotic solutions for offshore NDT inspection, demonstrating capabilities that support asset integrity risk management by enabling reliable detection of structural flaws in challenging environments. The presentation will take place at the Climate Innovation Zone in collaboration with the Clean Resource Innovation Network (CRIN).
The Climate Innovation Zone brings together organizations demonstrating technologies that support safer, more efficient industrial operations and responsible asset management, while showcasing British Columbiaโs growing role in advanced technology development.
Get in touch to schedule a meeting with us: https://t.co/sADLJ3ZZph
#DroneInspection #IndustrialInspection #UAVTechnology #DroneTechnology #InspectionTechnology #TetheredDrone #RemoteInspection #IndustrialDrones #AssetIntegrity #NDTInspection #Innovation #ModularUAV
No more single-mission drones. Versatility is no longer optional for industrial UAVs.
Payloads on ๐ฆ๐ธ๐๐ฟ๐ผ๐ป ๐ฎ can be changed toollessly in under 2 minutes. However, operational flexibility depends less on swap time and more on the ๐ฟ๐ฎ๐ป๐ด๐ฒ ๐ผ๐ณ ๐ฎ๐๐ฎ๐ถ๐น๐ฎ๐ฏ๐น๐ฒ ๐ฝ๐ฎ๐๐น๐ผ๐ฎ๐ฑ๐.
Most inspection drones are limited to a flying camera or a single sensor. We built ๐ฆ๐ธ๐๐ฟ๐ผ๐ป ๐ฎ on a heavy-lift architecture with modular power (tethered or battery) โ specifically to support a broader range of payloads than typical UAV platforms.
From visual inspection to ๐จ๐ง, ๐๐ ๐๐ง, ๐๐๐ง, and ๐๐๐ฟ๐ณ๐ฎ๐ฐ๐ฒ ๐ฝ๐ฟ๐ฒ๐ฝ๐ฎ๐ฟ๐ฎ๐๐ถ๐ผ๐ป โ all deployable from a single UAV platform.
A typical inspection may involve multiple steps:
๐ฃ๐ฟ๐ฒ๐ฝ๐ฎ๐ฟ๐ฒ
Use SURFACE Series payloads to remove rust, scale, or coatings where required.
๐ ๐ฒ๐ฎ๐๐๐ฟ๐ฒ
Swap to SENSE Series payloads โ UT, EMAT, or DFT โ depending on the inspection scope. Use the โSENSE matrixโ arm for multi-point measurements in one attachment, or โSENSE reachโ arm for confined or obstructed areas.
๐ฉ๐ฒ๐ฟ๐ถ๐ณ๐
Switch to VISION Series payload for high quality visual inspection.
All on the same platform. Same flight. Same crew.
๐ช๐ต๐ ๐๐ต๐ถ๐ ๐บ๐ฎ๐๐๐ฒ๐ฟ๐:
โข Higher UAV utilization across more project types
โข Fewer specialized drones to purchase, insure, and maintain
โข Less operator retraining
โข More inspection capabilities from a single investment
โข Greater ROI from every deployed system
We didnโt build a drone around a single sensor. We built an ๐ถ๐ป๐ฑ๐๐๐๐ฟ๐ถ๐ฎ๐น ๐จ๐๐ฉ ๐ฝ๐น๐ฎ๐๐ณ๐ผ๐ฟ๐บ ๐ฑ๐ฒ๐๐ถ๐ด๐ป๐ฒ๐ฑ ๐๐ผ ๐๐๐ฝ๐ฝ๐ผ๐ฟ๐ ๐บ๐๐น๐๐ถ๐ฝ๐น๐ฒ ๐ถ๐ป๐๐ฝ๐ฒ๐ฐ๐๐ถ๐ผ๐ป ๐๐ฎ๐๐ธ๐. Invest in a platform built for multi-mission inspections.
Learn more about Skyron 2 drone payloads: https://t.co/dgR47N9C4l
#DroneInspection
#IndustrialInspection
#UAVTechnology
#DroneTechnology
#InspectionTechnology
#TetheredDrone
#RemoteInspection
#IndustrialDrones
#AssetIntegrity
#NDTInspection
#Innovation
#ModularUAV
Uninterrupted inspection starts with continuous flight.
Every interruption breaks the workflow, leading to repositioning, loss of context, accumulated delays, and increased risk in confined or hard-to-access environments.
For short flights, itโs manageable. But as inspection volume scales, the workflow starts revolving around battery changes quickly becoming an efficiency bottleneck. The issue isnโt just battery life itโs being locked into a single power model. With Skyron 2 drone, modular power was part of the design from day one. Operators can ๐๐๐ถ๐๐ฐ๐ต ๐ฏ๐ฒ๐๐๐ฒ๐ฒ๐ป ๐๐ฒ๐๐ต๐ฒ๐ฟ๐ฒ๐ฑ ๐ฎ๐ป๐ฑ ๐ฏ๐ฎ๐๐๐ฒ๐ฟ๐ modes based on mission needs. Unlimited endurance or full mobility - choose per mission.
When continuous operation matters, the Smart Tether System enables:
โข unlimited flight time with ground-supplied power
โข support for heavier payloads (including surface prep tools)
โข ultralight micro-cable with minimal impact on flight performance
โข automated winder with active tension control to prevent tangling
This is particularly relevant for:
โข confined spaces where battery swaps are impractical
โข long-duration tank inspections
โข operations requiring heavier payloads
โข systematic, multi-point inspection campaigns
If youโre optimizing around flight time, youโre working around a limitation instead of removing it. The better question is: does your inspection require continuous operation?
Learn more about Skyron 2 modular power system: https://t.co/Z5CXd0iPfQ
#DroneInspection
#IndustrialInspection
#UAVTechnology
#DroneTechnology
#InspectionTechnology
#TetheredDrone
#RemoteInspection
#IndustrialDrones
#AssetIntegrity
#NDTInspection
#Innovation
Congratulations to the seven new clean technologies selected for the $5 million in funding from @CRIN_Canada's Digital Oil and Gas Technology Competition: @AeriumAnalytics@avestec@KuvaSystems@QubeIoT@sensorup@VEERUMInc and VL Energy.
https://t.co/cCToh1fqvW
Innovate BC has awarded over $1M to 4 BC R&D projects through the Ignite program.
Congratulations to all the winners!
@uvic & @Axolotl_Biosci@SFU & @BallardPwr@UBC & @EnvisioningLabs (Rockburst Technologies)
@UBC & @avestec
Read more: https://t.co/wz0njRFxvI