Bcomtesting

Mechanical Testing Lab, Strain Gage Installation, and Engineering Consultation Services

[Bcomtesting @bcomtesting]

ASTM D7078 Shear test using new N2A-06-C064A-500/SP61 strain gauge from #MicroMeasurements when #precision and accurate strain field matters

[Bcomtesting @bcomtesting]

ASTM D7078 Shear test using new N2A-06-C064A-500/SP61 strain gauge from #MicroMeasurements when #precision and accurate strain field matters

[Bcomtesting @bcomtesting]

When testing composites with ASTM D6641(combined loading compression), modulus and Poisson's ratio can be achieved using strain gages like Micro-Measurements 125UT #modulus #micromeasurements #Bcomtesting #rightwaytesting

[Bcomtesting @bcomtesting]

When testing carbon fiber composites, precision matters. Using strain gages is crucial!#Diversity in testing provides better overall material properties understanding.#diversityisgood #micromeasurements #testing #carboncomposites

[Bcomtesting @bcomtesting]

When determining true fiberglass pipe stretching under load a Micro-Measurements 20CBW strain gage is the way to go! #bcomtesting #MicroMeasurements #whenstretchingmatters

[Bcomtesting @bcomtesting]

When testing Poisson ratio matters, the correct strain gage size like CEA-06-250UT-350 makes all the difference! #carbonfiber #fiberpattern #fiberstrandsize

[Darryl Peterson @darrylrpeterson]

Can't decide between lateral or vertical directions? Measure both using a #strain_gage with a tee #rosette geometry. #happy #holidays

[Darryl Peterson @darrylrpeterson]

Ever wondered how to connect a 175 ohm #strain_gage? Wire it as a half bridge using a Vishay Precision #resistor S-175-01.

[Bcomtesting @bcomtesting]

ASTM D4255 Two-rail In-plane shear testing coupons ready for #action using CEA-06-187UV-350

[Bcomtesting @bcomtesting]

Shear testing D5379 double v-notched specimens ready for testing #shearmoduluswithstraingages

[Bcomtesting @bcomtesting]

Poisson's ratio testing on composites using Micro-measurememts CEA-06-125UT-350. Importance of strain gages when precision matters! #MMqualityatwork!

[Bcomtesting @bcomtesting]

Bcomtesting and Micro-Measurements ready for Huntsville training on using strain gages in composites and plastics testing #timeforstrain

[Bcomtesting @bcomtesting]

S167R gage has a split transverse configuration leaving the full axial component in the center#split personality

[Bcomtesting @bcomtesting]

S5056Q 1000ohms full bridge in bending allows for higher input voltage

[Bcomtesting @bcomtesting]

Torque determination on steel shaft using a full bridge configuration CEA-06-250US-350 strain gage

[Bcomtesting @bcomtesting]

Coupon testing ISO527 with CEA-05-125UN-350 leads precise results for modulus, eliminating any extensometer slipping

[Bcomtesting @bcomtesting]

Use of CEA-06-062UW-350 in Compression coupon testing under ASTM D6641 deliver consistent results and better modulus