Brad Healey

[Brad Healey @bradhealey62]

@elynyd @DawleyDawley no nothing yet

[Brad Healey @bradhealey62]

@elynyd @DawleyDawley Hey Elynyd its hard to explain on here but I will be in early tomorrow if you would like some help with it

[Brad Healey @bradhealey62]

Fine adjustments can be made with the vertical and the two horizontal lock and adjust the main scale to the upper instrument and to the base

[Brad Healey @bradhealey62]

@Carpenter_SAIT sorry new answer (HI) can be determined by adding the backsight reading to the benchmark elevation BM+BS=HI

[Brad Healey @bradhealey62]

@Carpenter_SAIT aiming at a rod set on tge datum or benchmark will give you height of instrument

[Brad Healey @bradhealey62]

@Carpenter_SAIT spandrel tie on top and a through tie on the bottom

[Brad Healey @bradhealey62]

@Carpenter_SAIT @xcrazyjokerx @Jddemers13 @AlberZona27 @Cookie191919 the rate of which concrete is poured

[Brad Healey @bradhealey62]

@Carpenter_SAIT limitations on minimum size, thickness and/or the composition of all of its load-carrying members

[Brad Healey @bradhealey62]

@Carpenter_SAIT Bowstring truss are typically capable of the longest spans between 15 and 60m (50' to 200')

[Brad Healey @bradhealey62]

@Carpenter_SAIT @Cookie191919 @AlberZona27 toggle bolt

[Brad Healey @bradhealey62]

@Carpenter_SAIT snap a chalkline at the top of the wall moulding

[Brad Healey @bradhealey62]

@Carpenter_SAIT vibration and air borne

[Brad Healey @bradhealey62]

@Carpenter_SAIT it should be cut 3mm shorter than the measurment from the last tee to the wall angle to allow for the wall angle thickness