Cellar Nerd

I’m Fredrik, the nerd in the cellar, playing around with 3D printing, CNC carving, lasering, woodworking and other things DIY.

[Cellar Nerd @CellarNerd]

I made my own Webb telescope – using a @Raspberry_Pi to display images taken by the telescope itself.

https://t.co/ir3DieVTf1

#jwst #unfoldtheuniverse #space #nasa #esa #csa #raspberrypi #diy @NASAWebb @ESA_Webb

[Cellar Nerd @CellarNerd]

@chippedbuilds I must have missed the hype… I’ve de-elegooed my N4Pro, running stock Klipper with help from OpenNept4une. Currently waiting for a new hot end, as mine decided the screws attaching the heat block should snap. But when it’s actually printing it’s doing a great job 😎

[TheFreeHeathenWorkshop @thefreeheathen]

Hello Tribe
I have two ways i am Fund Raising it I am using my https://t.co/QfmH91vcvy… for personal stuff and for the event and stay and flights I am using thought my american contacts https://t.co/YPJAOVfVCS

[Cellar Nerd @CellarNerd]

Came home to the mother of all blobs on my @Elegoo_Official #Neptune4Pro. But unlike when Johnny Cash fought the law, it looks like I won this one.

[Cellar Nerd @CellarNerd]

Help @thefreeheathen make it to #MRRF. I can’t make it myself, but I’d love to see my man go there. https://t.co/XuiFgmsT1E

[Cellar Nerd @CellarNerd]

Looking better!

[Cellar Nerd @CellarNerd]

I wasn’t too happy with the finish on the Iron Man helmet, so I started over.

[Cellar Nerd @CellarNerd]

@NeaveEng Ordered. Been eyeing them for a while, now’s as good a time as any. But I need something like this for my workshop.

[Cellar Nerd @CellarNerd]

Tweeps, anybody’s got a decent screwdriver set recommendation? My basic set is all but done now, so I need a new one. Nothing fancy needed, but will for sure be considered.

[Cellar Nerd @CellarNerd]

I don't like glass fiber. It's coarse and rough and irritating and it gets everywhere. But it does add some strength to a #3dprint I’ve printed too fast and therefore has quite poor layer adhesion. Just wish I’d done it before painting and adding the electronics, though.

[Cellar Nerd @CellarNerd]

@TheNextDecade @stlDenise3D @CNC_Kitchen @Elegoo_Official The Neptune 4-series need OpenNept4une to really be good. At least my N4Pro did.

[Cellar Nerd @CellarNerd]

@PhillipForbes Sounds like I’ve got a plan, then. I’m giving it away to a nine year old friend of my son, so it can do with all the strength it can get.

[Cellar Nerd @CellarNerd]

@PhillipForbes Game studios need to add an oldie mode: “This is what’s happened this far in the game, this is what you’re doing next. Oh, and here are the most important controls you need to remember.”

[Cellar Nerd @CellarNerd]

@PhillipForbes I’ve considered covering the entire inside of the Iron Man helmet I printed in fibreglass to add some strength, as I may have printed it a bit quickly – thus having poor layer adhesion. But I haven’t figured out if it will make it a whole lot worse to wear or not.

[Cellar Nerd @CellarNerd]

Repairing a dining room chair tonight. 5 min epoxy and threadlocker from @LoctiteGlue to the rescue.

[Cellar Nerd @CellarNerd]

@shenanigans3d @WhamBamSystems I used to think nothing sticks to silicone, but my CA glue sticks really well to the mat, sadly. Really, really well, leaving acetone to be the only solution to get it off.

[Cellar Nerd @CellarNerd]

Is there a mat I can put on my workbench that won't attach to CA glue? My silicone mat from @WhamBamSystems (and my brain) is tired of acetone...

[Cellar Nerd @CellarNerd]

@peterso58518258 @WhamBamSystems No, not actually damaged the silicone, but it has gotten a few dings from me being impatient while removing the dried CA glue.

[Cellar Nerd @CellarNerd]

Cam is misaligned, but I’m making a sign to hang by the gaming PC. “Bots of any kind will not only get you banned from the server, but also from the computer”. Son (almost 9) needs to learn 😅

[Cellar Nerd @CellarNerd]

@thefreeheathen @Flsun_official Ooh, this needs to happen. @Flsun_official, this guy with a delta can be quite a sight to behold.

[Cellar Nerd @CellarNerd]

@Rum_Race @Raspberry_Pi @Polymaker_3D Right here:

[Cellar Nerd @CellarNerd]

@shenanigans3d You really do. Everybody does! Here’s the one I printed: https://t.co/31iWWH3TZU

Let me know if you do, I’ve got the wiring and code at the ready.

[Cellar Nerd @CellarNerd]

“UNITED? UNITY ISN’T ABOUT BEING THE SAME. IT’S ABOUT WORKING TOGETHER.” Love my Iron Man helmet, extra so because it’s powered by a @Raspberry_Pi Pico. Printed in @Polymaker_3D Polylite CosPLA, sanded and painted.