There has been quite a bit of discussion regarding evidence of machine-based algorithms in the #2026Election results.
Being an engineer, I believe it is important to examine how such an algorithm would be implemented.
So, when evidence of Wi-Fi hotspot inside the Martin Township, Michigan early-voting site was brought to my attention, I did some digging. A summary of my findings has been documented in a report that has been shared with local, state, and federal officials. Among many other findings, this report identifies a hardware-address prefix registered to a manufacturer in Shenzhen, China.
Here’s the issue in plain English:
Detecting Wi-Fi is like hearing a phone ring nearby. It tells you something is transmitting—not whose device it is, what it’s connected to, or what it’s doing.
The questions that matter:
What device produced the signal?
Was the device connected to election equipment?
Was the election equipment tied to the Wi-Fi device modified in any way from the certified configuration?
Were there any communications involving the election equipment prior to 8pm on election day?
A manufacturer’s location doesn’t answer those questions.
Neither does the detection of a Wi-Fi signal at a polling location.
A Physical Configuration Audit (PCA) does.
Preserve the equipment and logs.
Identify the device.
Publish the findings.
Any election certified on the basis of election results generated by non-certified election equipment not subject to public examination does not pass the sniff test.
Voters deserve answers that can be checked—not allegations or assurances they have to take on faith.
#ElectionSecurity #2026Election
Find a summary of my findings in the following Election Crime Bureau post:
https://t.co/tEgFatBb9M
@RealLindellTV@realMikeLindell@MrJustinBarclay@TalkMullins@EmeraldRobinson@laralogan@EagleEdMartin@DHSgov@FBIDirectorKash@rooprajfox2@Charlieleduff@elonmusk@MikeGarafolo@TruckerRandy
DEBRIEF: I have attached a copy of my statement before the Wayne County Board of Canvassers prior to yesterday's 2026 Election certification vote (H/T Braden Giacobazzi).
Prior to my statement, a representative of the MI Bureau of Elections issued a statement to the effect of...
"The Department will review the information provided by Senator Colbeck once certification is over"
Translation? "Pound sand."
Please note that I have submitted a similar request (with significant evidence supporting my concerns) to the MI State Board of Canvassers for a Physical Configuration Audit (PCA) of voting systems prior to the statewide certification vote.
The MI State Board of Canvassers is scheduled to certify the #2026Election on Monday, November 23 at 10 am ET...prior to any confirmation that the election was conducted on certified voting systems. This vote will occur in Room 1100 of the Binsfield Office Building, 201 Townsend Street, Lansing, MI.
@RealLindellTV@realMikeLindell@TalkMullins@EmeraldRobinson@MrJustinBarclay@Charlieleduff@BobDutko
@propublica The article suggests EIN having significant influence over the State Election Board and notes that an EIN researcher is serving as the main conduit between EIN and the board - who is the conduit?
https://t.co/USg3mtu3qz
Please also ask for a (Product Configuration Audit) PCA - a hands-on inspection that checks whether the hardware, software and network configurations of machines actually in use match the machines that were tested and approved.
Start with the tabulators at your voting precinct. CISA is on hand. Template below.
https://t.co/eihd5EJnj3
BREAKING: This morning I submitted a formal request to CISA to conduct Physical Configuration Audits (PCAs) of the electronic voting systems in numerous communities throughout Michigan.
Title 6 Section 659 grants CISA the authority to conduct such examinations upon request of local officials. Local officials have made such requests as have I as a former Michigan State Senator.
We have evidence of Wi-Fi hotspot tied to a voting machine in use to support early voting. The PCA would determine if a modem was installed on the voting machine. This observation could be used as a predicate to examine network communication logs that would confirm remote transmissions that compromise election security.
Communications of election results prior to closure of polls on election day is a felony violation of Michigan law (MCL 168.765a(13)). Any machine capable of doing so would not only violate the machine certification requirements, it would also call into question the certification of any election conducted that depends upon results produced by these machines.
NOTE: Recounts are insufficient to detect any manipulation of election results compromised by the use of machines capable of remote transmissions. Any bad actor with privileged access to election results prior to election day would be able to use that information to determine how many fake ballots would need to be inserted to address any gaps between actual results and their projected results. Fake ballots can be injected in a variety of ways by individuals with access to a list of low propensity or illegal voters in the state Qualified Voter File (QVF). The most obvious involves unsupervised poll workers at Early Voting sites fraudulently assigning voters to ballots in the QVF, then printing ballots on demand and inserting them into tabulators. Recounts are useless in the detection of fake ballot injections. Voters who show up to vote in person on election day and are told that they already voted provide one means of detecting such fraud but it is rarely investigated.
Attached are photos which provide a sample of the evidence that I have in support of my PCA request. They include a photo of the product labeling for the certified "Made in USA" configuration and non-certified "Made in Taiwan" product labeling. I have also included a sample of the Wi-Fi hotspot evidence in my possession (and the possession of federal and state officials).
Welcome to the wonderful engineering world of Configuration Management ;)
@RealLindellTV@CISAgov@elonmusk@realMikeLindell@DataRepublican@EmeraldRobinson@StephenM@Curiousityfirst
TODAY: I submitted a formal request to the MI State Board of Canvassers that they forgo the statewide certification of the 2026 election in Michigan until such time as Physical Configuration Audits (PCAs) have been completed of electronic voting systems across the state.
In support of this request, I have submitted evidence that the systems deployed in support of the 2026 elections in Michigan were not consistent with the configurations that had been certified by the Michigan State Board of Canvassers.
MI Bureau of Elections Director Jonathan Brater has a ministerial duty to confirm that our elections records are in good order much as our County Canvassers are obliged to do so. To date, the evidence indicates that he and his boss, MI SoS Jocelyn Benson, have been negligent in their duty to ensure that the systems deployed in support of our elections are consistent with certification records.
Please note that this is not a benign administrative paper chase. The observed configuration discrepancies involve remote access features that pose a national security threat to our election systems as they would enable foreign governments to interfere with our election results.
Prudence dictates that such interference needs to be ruled out prior to the certification of any election results else the term "certification" is to have no meaning at all.
@realMikeLindell@RealLindellTV@EagleEdMartin@laralogan@EmeraldRobinson@elonmusk@MrJustinBarclay@JonathanBrater@JocelynBenson
BREAKING: Dubious Certification Claims Made by MI Bureau of Elections Director Pose A Risk to National Security and Call 2026 Election Results Into Question
Is there hidden communications hardware in Michigan's voting machines?
✅Michigan's Dominion contract: the PCOS-321C "contains an internal dial-up modem."
✅The EAC has never certified modems for this system. On Oct. 26, eight days before the election, it removed the 321C from the certified configuration.
✅The federal test unit reads "Made in USA." Units I photographed during testing in Canton, Livonia and Detroit read "Made in Taiwan." The factory has never been disclosed.
✅The modems used in state testing come from a supplier whose products are built almost entirely in mainland China or Taiwan.
✅Asked for an audit, the Bureau of Elections pointed to approvals for a monitor and two network switches (i.e. No Modem).
Election systems are federally designated critical infrastructure. A tabulator that can communicate during nine days of early voting could leak running tallies before polls close (a felony). Those tallies could guide the addition of ballots, and a recount would count every one of them.
A recount can't detect that.
A physical configuration audit can.
Audit the hardware before certifying the #2026Election.
Full report:
https://t.co/xeJdxHFchQ
@RealLindellTV@elonmusk@DataRepublican@realMikeLindell@CISAgov@JonathanBrater@JocelynBenson@MrJustinBarclay@rooprajfox2@wxyzdetroit@kayleigh@Rasmussen_Poll@laralogan@PatrickByrne
BREAKING: This morning I submitted a formal request to CISA to conduct Physical Configuration Audits (PCAs) of the electronic voting systems in numerous communities throughout Michigan.
Title 6 Section 659 grants CISA the authority to conduct such examinations upon request of local officials. Local officials have made such requests as have I as a former Michigan State Senator.
We have evidence of Wi-Fi hotspot tied to a voting machine in use to support early voting. The PCA would determine if a modem was installed on the voting machine. This observation could be used as a predicate to examine network communication logs that would confirm remote transmissions that compromise election security.
Communications of election results prior to closure of polls on election day is a felony violation of Michigan law (MCL 168.765a(13)). Any machine capable of doing so would not only violate the machine certification requirements, it would also call into question the certification of any election conducted that depends upon results produced by these machines.
NOTE: Recounts are insufficient to detect any manipulation of election results compromised by the use of machines capable of remote transmissions. Any bad actor with privileged access to election results prior to election day would be able to use that information to determine how many fake ballots would need to be inserted to address any gaps between actual results and their projected results. Fake ballots can be injected in a variety of ways by individuals with access to a list of low propensity or illegal voters in the state Qualified Voter File (QVF). The most obvious involves unsupervised poll workers at Early Voting sites fraudulently assigning voters to ballots in the QVF, then printing ballots on demand and inserting them into tabulators. Recounts are useless in the detection of fake ballot injections. Voters who show up to vote in person on election day and are told that they already voted provide one means of detecting such fraud but it is rarely investigated.
Attached are photos which provide a sample of the evidence that I have in support of my PCA request. They include a photo of the product labeling for the certified "Made in USA" configuration and non-certified "Made in Taiwan" product labeling. I have also included a sample of the Wi-Fi hotspot evidence in my possession (and the possession of federal and state officials).
Welcome to the wonderful engineering world of Configuration Management ;)
@RealLindellTV@CISAgov@elonmusk@realMikeLindell@DataRepublican@EmeraldRobinson@StephenM@Curiousityfirst
Is the voting machine that counted your vote one that was certified?
Nobody routinely checks.
A Physical Configuration Audit (PCA) answers one question: is this equipment the same hardware, firmware and software that was approved?
CISA's election services are FREE.
Ask your clerk to request a PCA...before machine vendors change the configuration in use for the #2026Election.
See how:
https://t.co/T4YqQfDApa
@elonmusk@RealLindellTV@realMikeLindell@CISAgov@CISACyber
BREAKING: This morning I submitted a formal request to CISA to conduct Physical Configuration Audits (PCAs) of the electronic voting systems in numerous communities throughout Michigan.
Title 6 Section 659 grants CISA the authority to conduct such examinations upon request of local officials. Local officials have made such requests as have I as a former Michigan State Senator.
We have evidence of Wi-Fi hotspot tied to a voting machine in use to support early voting. The PCA would determine if a modem was installed on the voting machine. This observation could be used as a predicate to examine network communication logs that would confirm remote transmissions that compromise election security.
Communications of election results prior to closure of polls on election day is a felony violation of Michigan law (MCL 168.765a(13)). Any machine capable of doing so would not only violate the machine certification requirements, it would also call into question the certification of any election conducted that depends upon results produced by these machines.
NOTE: Recounts are insufficient to detect any manipulation of election results compromised by the use of machines capable of remote transmissions. Any bad actor with privileged access to election results prior to election day would be able to use that information to determine how many fake ballots would need to be inserted to address any gaps between actual results and their projected results. Fake ballots can be injected in a variety of ways by individuals with access to a list of low propensity or illegal voters in the state Qualified Voter File (QVF). The most obvious involves unsupervised poll workers at Early Voting sites fraudulently assigning voters to ballots in the QVF, then printing ballots on demand and inserting them into tabulators. Recounts are useless in the detection of fake ballot injections. Voters who show up to vote in person on election day and are told that they already voted provide one means of detecting such fraud but it is rarely investigated.
Attached are photos which provide a sample of the evidence that I have in support of my PCA request. They include a photo of the product labeling for the certified "Made in USA" configuration and non-certified "Made in Taiwan" product labeling. I have also included a sample of the Wi-Fi hotspot evidence in my possession (and the possession of federal and state officials).
Welcome to the wonderful engineering world of Configuration Management ;)
@RealLindellTV@CISAgov@elonmusk@realMikeLindell@DataRepublican@EmeraldRobinson@StephenM@Curiousityfirst
Maricopa still out by by at least 7K voters for election day voting.
Election Day Maricopa Announces 265K checkin
Final Results Announced 208K + 49K ARS Ballots
= 258K
This doesn't include the 5K that was uploaded one week after Election day.
Anyone, Anyone.....
#arizona #maricopa
BREAKING: Today, as a former Michigan State Senator and a Wayne County resident, I formally asked the Wayne County Board of Canvassers to require a Physical Configuration Audit (PCA) of our voting machines before the 2026 election results are certified.
A PCA is a hands-on inspection that checks whether the hardware, software and network configurations of machines actually in use match the machines that were tested and approved.
What I found:
- The voting machines I personally inspected during pre-election testing in Canton, Livonia and Detroit don't match the unit tested for certification.
- The tested unit is labeled "Made in USA."
- The machines in use in Wayne County are labeled "Made in Taiwan." They also come from a different serial-number series and carry a later circuit-board revision. The factory that built them has not been publicly identified.
- Dominion's own internal parts list, prepared in wake of their testimony before Congress in 2020, showed that about 48% of the parts in this tabulator model came from China. Dominion is now owned by Liberty Vote.
- Michigan's 2019 state certification report described a modem-equipped tabulator configuration alongside the federal certificate. That federal certificate listed modems as not supported, and the modem-equipped model was not on its list of certified hardware.
- The only public hardware test record for this tabulator shows a "Made in USA" unit. I have found no public record that the "Made in Taiwan" units now in use were tested for certification.
Why it matters:
- If any of these machines contain communication hardware that isn't in the certified configuration, such as a hidden modem, the chain of custody for the 2026 election can't be fully verified. The Board would then have no physical proof that results weren't accessed or changed before polls closed.
- "Made in Taiwan" units of the same model have also been documented in Barry County and Allegan County, so this goes beyond Wayne County.
- Similar configuration mismatches have been found in other states.
I have also submitted formal Requests for Investigation to federal authorities.
My hope is simple: a transparent, professional PCA of Wayne County's tabulators, with the results shared with the public.
#2026Election
H/T Narelle
@RealLindellTV@realMikeLindell@MikeGarafolo@MrJustinBarclay@TrueTheVote@PatrickByrne@Curiousityfirst@TruckerRandy@AttyStefLambert@DHSgov@PeterTicktin@SheriffLeaf