320 × 240 video at 15 fps, with sound, on an ESP32-S3.
This mini TV by Tech Talkies plays MJPEG video and PCM audio from microSD. Tap to pause or skip, and swipe to change the volume.
🤖 Learn more: https://t.co/DIgaW6dsl9
Watch the build: https://t.co/lU1Gavbuxy
#ESP32 #Makers
720 printed flaps for 16 characters. That's Ivan Marchand's OpenFlaps, a DIY split-flap display.
A Raspberry Pi Pico W controls the modules over I²C. Add more characters in blocks of four.
🤖Learn more: https://t.co/70CKrpAuxc
#Makers#RaspberryPi
Two thumbtacks hold up Mural V2, Nik Ivanov's DIY wall plotter.
Two steppers move the 3D-printed carriage along its belts. A small servo lifts the washable marker between strokes.
🤖Learn more: https://t.co/Xqn4gHx0iQ
#Makers#PenPlotter
No parts on your desk yet? Build the circuit anyway.
Design and run a DFRobot project in Velxio, built by @DMonteroCrespo1. 3 winners get up to $100 in parts each to build theirs for real.
Enter by Dec 13: https://t.co/bomWAqb5gz #Makers
We’re currently experiencing an access issue with https://t.co/3PlJnIcAEF. Our team is working to restore the website as quickly as possible. We apologize for the inconvenience and will update this post once the site is back online.
@Blessed_Chimra Yes, we're on it 🙏 https://t.co/3PlJnIcAEF is temporarily unavailable and the team is already working on a fix. Sorry for the inconvenience, we'll post an update here once it's back up.
This robot plugs in a Tesla Model 3 by itself, then parks by the wall.
Lidar and mecanum wheels get it close, a camera locks onto a ChArUco board, and two suction cups anchor it to the car so it can push the plug home.
By Mew463: https://t.co/0GA1vBOHY4
#Robotics#OpenSource
#NewArrivals $49.50 formaldehyde sensor with @sensirion's SFA40 inside.
Under 0.3% ethanol cross-sensitivity, so perfume or hand sanitizer won't trip it. ±20 ppb accuracy, SHT4x temp/humidity compensation, Gravity I2C.
🤖For more details: https://t.co/zoA1djoA7i #AirQuality
This open source quadruped by @Dorian_Todd_ can fly. It walks, folds its legs into prop arms, flies, lands, walks off.
The trick: thrust only pushes up, so each leg presses into a printed end stop. The servos never hold the flight load.
https://t.co/rAH5ngvZrc
#Robotics
Our AI Pose & Gesture Recognition Sensor + @UNIHIKER K10 now coach @Rockets_cn through wall sits, lunges and planks, and they won’t let him quit early.
He’s 10kg down and we’re honestly a little scared of it 😅
#NewArrivals#DFRobot#AIPoseSensor#UNIHIKER
Want your own merciless coach? Here’s what Rockets used:
AI Pose & Gesture Recognition Sensor: https://t.co/OsIMPhumcv
UNIHIKER K10: https://t.co/9scrQiFw84
Well, this made our day. HUSKYLENS 2 won the Edtech & Software category at the 2026 Teach Secondary Awards.
With 20+ built-in AI models, it gives students a hands-on way to explore object tracking, face recognition, and more.
Thanks @TeachSecondary and judge @gorillaphysics!
🌟 Curriculum Improvement, judged by Gordan Cairns @gatolepardo 🌟
Key Terms Glossaries and Support from @RoySocChem
🌟 Edtech & Software, judged by Kit Betts-Masters @gorillaphysics 🌟
Huskylens 2 AI Vision Sensor from @dfrobotcn
#NewArrivals 5m of underwater LiDAR range in clear water.
The $39.90 TF-UW500 measures distances to within 3 cm from 0.1 to 2 m and connects via UART or I2C.
Building a pool robot? Seal the sensor into the housing before it goes underwater.
🤖For more details: https://t.co/G4FfTHNtzz #Robotics
Apex Legends and Marvel Rivals on a tiny x86 module.
@ToastyBrosTech tested both on the LattePanda Mu Ultra with a Core Ultra 5 226V and integrated Intel Arc graphics. They even designed their own case.
Watch the tests: https://t.co/HgFIXI4vgY
#LattePanda#MiniPC@LattePandaCN
Technically, it’s a handheld. He’s holding it. 😅😂
Arnov Sharma built a giant Game Boy Advance with a 15-inch screen and a #LattePanda Mu N305 inside. It even runs Fallout: New Vegas.
Full build guide: https://t.co/vx9e1yYnXC