Failing to Yield

0 Crosswalk Deaths as Belligerently as Necessary.

[Failing to Yield @failingtoyield]

the 3d printed half panel. 3. make 2 copies from this mold using the final epoxy resin, then join them to make the final product: a 30cm x 37 cm panel. 4. Use that joined panel to create the first of hopefully many molds which can be scaled up at ease. I will keep you posted.

[Failing to Yield @failingtoyield]

I wrote an e-mail this morning. The idea never died, I just went quiet on it until I was certain I had something that will survive a snow plow. I am now certain. Stay tuned. Lets see if they're too arrogant to even open it.

[Failing to Yield @failingtoyield]

Once I have the 3d print btw, there are a few steps before I will have a finished full panel to show everyone. 1. I will have to smooth some areas before making a mold, I am hoping wet clay will do the trick, as it only needs to be temporary. 2. make a 2 piece silicone mold from

[Failing to Yield @failingtoyield]

Context: https://t.co/lNfjR3oqYJ

[Failing to Yield @failingtoyield]

@Seebo429 @BikeMayorHfx Already had mine picked out, collapsible so it's easily portable. Someone was clearly already doing this from the other side.

[Failing to Yield @failingtoyield]

@Seebo429 They will have a better option very shortly.

[Failing to Yield @failingtoyield]

Final build of the reflective traffic calmer is being 3D printed at a local university as we speak. Steps yet to go, but we're close. More soon.

[Failing to Yield @failingtoyield]

Took my latest reflective traffic calmer prototype in to a local university today to go over it with a professor, and the small modifications I'd like to have in the 3D printed version. Went really well. Even going to have our little logo embossed on it.

[Failing to Yield @failingtoyield]

I am in discussions to have a 3D printed version of my design made. Possibly for the prototype install

[Failing to Yield @failingtoyield]

Status update on the traffic calmer : Going for a spring install, as it was cutting it too close with the cold weather. The time has not been wasted however, I have improved the traction, and brought the total volume down by 1/3 while maintaining effectiveness.

[Failing to Yield @failingtoyield]

@realfatapollo It's almost as if that term has become a sick joke in this city. Someone should really do something about that.