William Bray

Mixed cropping, self replacing merinos, family farm. Jamestown and Erskine.

[William Bray @fairvale5491]

@HoolyMcg Terminator would be gone on canbus. Had same issue on jd tractor was the iso plug

[William Bray @fairvale5491]

Challenger MT 765 coming up with this fault. Ad blue has been deleted. Have replaced relay, put plugged resistor into line. Can go days without fault then occurs frequently. Anyone had similar?

[William Bray @fairvale5491]

Having trouble with hardi boom with 16 section active air. Some sections are turning on later than others. Have played with section control settings and still does it. Iso controller through JD gen 4. Anyone out there with the same setup?

[William Bray @fairvale5491]

@ZwarFarms We’ve got 2cu on 840 manitou. Use it for fert, gypsum and lime. Could be slightly bigger for fert/grain but big enough for gypsum and lime

[William Bray @fairvale5491]

@mrlange81 I just drilled a hole in my existing bracket for the 2630 and only use 2 bolts. Or in another machine I’ve used a ram mount. Fits perfectly in the bolt holes of the 4640. I can find you the ram part number if it helps

[William Bray @fairvale5491]

@cropmad We have a 09 Trident. I’d go later adblue model if I had my choice again. This is egr. Nice truck have had a variety of smaller issues. Not sure what trucks don’t have issues but. Mack in Adelaide have never not had the part we’ve needed

[William Bray @fairvale5491]

Massey 9980/5400 front owners curious to know what your draper belt speed is doing windrowing canola? In heavy crop struggling to get more than 500-600rpm going 4-6kph. 40ft front

[William Bray @fairvale5491]

@scootersfarm Thanks fellas. New boomspray is iso and rate controller I have only done 3 seasons. Thinking I might as well keep it as not going to get the value in the price of the old boomspray 🤷🏼‍♂️

[William Bray @fairvale5491]

JD Greenstar gurus would the rate controller that I have on my boomspray currently be able to be pulled off and used on a air cart or spreader?

[William Bray @fairvale5491]

@johngbennett @ryannt_paulryan @Tom_Porter96

[William Bray @fairvale5491]

@oster_huey Our neighbour has this I guess it’s still for sale. Modified to fit his 9.90

[William Bray @fairvale5491]

Won’t be long and 9mo son will be telling me to step aside I’ve got this dad. He was a fan of picking up the new header

[William Bray @fairvale5491]

@Reece_Mason1 @sam_edwards4 Our shearer uni bar is in its 18th seeding. Been a great machine!

[William Bray @fairvale5491]

@njlawles Should be able to set a minimum flow rate L/min in rate set up

[William Bray @fairvale5491]

@Oakhillsfarming @brodenholland Might be having similar problems

[William Bray @fairvale5491]

@GlenoraAg @angus_hogan I have one that is the controller to our Massey Baler. Its never been used as I use the iso on the tractor screen. I’m not sure about selling it but it might get you out of trouble for the time being

[William Bray @fairvale5491]

@morgs086 McNaught KY+ coupler 👌🏼

[William Bray @fairvale5491]

@Timm_Shepherd @Yangya182

[William Bray @fairvale5491]

@scootersfarm @AdrianC71955236 @ShaunCl67886732 Need a blade on the front of the snow mobile to clear the roads 😂

[William Bray @fairvale5491]

@iMatMcDonald We purchased a ex cfs truck out of pickles. The day I drove it home on the abc a NSW bushfire victim said that the ones that saved their house had a RFS truck arrive in their town. Cheap insurance now I think