Top Tweets for #Coldbending
Here's some 60.3mm OD tube that has recently gone through the cold bending section machines at Angle Ring.
Produced to multi radius bends, ranging between 2489mm to 3603mm in length.
#ColdBending #SectionBending #TubeBending #TubeManipulation #MetalBending

Starting the week off as we mean to go on!
Some #UniversalBeam going through our #ColdBending facilities at 254 x 146 x 43 UB bent XX 8700 i/arc - axis at 5080mm outside radius.
Always great to see our machines in action!
#SectionBending #MetalBending #CurvedSteel

No #AprilFools here, just a selection of #Beams ready to go through our #ColdBending facilities ❄️
Ranging from 533 x 210 x 82kg/m UB up to 686 x 254 x 170kg/m #UB, our section bending machinery will be busy processing these to the required specifications of our customer.

Getting up close and personal with some free issue S355J2+N flats, we've produced 16 of these beauties from a flat size of 350 x 40 on edge to an internal radius of 4400 at 90 degrees.
A whopping 12 tonnes of material in total!
#ColdBending #SectionBending #MetalBending

Thanks for sharing our latest case study @BCCCmembers!
If you would like to go to #InfinityAndBeyond, read on to see how our cold bent #RHS has helped form the structure for a brand new #Planetarium in #Cyprus:
https://t.co/FsXql8MQDd
#ColdBending #Export #BlackCountryBusiness
Our #export department has been busy producing a range of cold bent Rectangular Hollow Sections for the development of a new #planetarium in #Cyprus 🪐
Check out our project case study here ↩️
https://t.co/PedIrn4e56
#ColdBending #SectionBending #RHS #MetalBending #CurvedSteel

We’ve been bending steel for over 70 years, and whilst this is one of our most traditional techniques, #SectionBending is a processing method that has stood the test of time – for all the right reasons!
https://t.co/EyLzUrlYib
#MetalBending #CurvedSteel #ColdBending

At Angle Ring, we have been delivering section bending services, using cold rolling and cold bending techniques since we started in business over 70 years ago.
Read more about our #SectionBending services ⬇️
https://t.co/Tb3Fim2M2T
#ColdBending #MetalBending #CurvedSteel

We've been offering steel bending and curving services using cold rolling and cold bending techniques for 70 years.
Here's some chunky #BoxSection going through our rolling department.
Easy if you have the right tooling!
#ColdRolling #ColdBending #MetalBending

Tvitec | The perfect cold bending for the perfect glass dome https://t.co/mecJSMojSO
#Tvitec #Octatube #coldbending #glassbending #cuvedglass #glass #glassprocessing #glassdome #glassprojects #architecture #glassindustry
@TvitecGlass
@Octatube
It's not just carbon steels we can bend through our #SectionBending machinery at Angle Ring, we can also take on more lightweight materials, such as Aluminium.
Here are some #AluminiumSections that have recently gone through the shop floor.
#AluminiumBending #ColdBending

Great to see so much continued activity on the Angle Ring shop floor.
Here we have some cold bent beams with a 40m radius - mainly produced to 254mm x 146mm x 37mm in S355JR Universal Beam.
#UniversalBeam #ColdBentBeams #ColdBending #SectionBending

We operate #ColdBending machines to cover the entire section range, right up to 1100mm deep #beams - all on our single site production facility in Tipton, West Midlands.
These large and heavy profiles can be effortlessly rolled in-house for a wide range of large scale projects.

Here we have a 50 tonne cambering job that went through our shop floor last week, coming in at a whopping 838x292x176kg/m x 16.1m!
Not all bends have to be intricate, but they do have to be precise!
#CamberedSteel #SectionBending #ColdBending #ColdRolling #Beams #CurvedSteel

Looking good @IrelandFabricat!
Nice to see our #CurvedSteel in the frame - we produced various beam sizes from 762x267x197kg/m to 203x133x30kg/m
762 UB, some #InductionBent due to tight radius of bends required.
Lots of #ColdBending on the job as well.
https://t.co/vqbBRCYfNd
Sometimes a simple bend is all that's needed.
Here we have some #UniversalBeam, with just a gentle camber to them that have been precisely formed on our #SectionBending machines.
A quick, economical, flexible and accurate job from our team!
#ColdBending #CamberedBeam

We've been offering steel bending and curving services using cold rolling and cold bending techniques for almost 70 years.
Here's some chunky #BoxSection going through our rolling department. Easy if you have the right tooling!
#ColdRolling #ColdBending #MetalBending

It's not just carbon steels we can bend through our #SectionBending machinery at Angle Ring, we can also take on more lightweight materials, such as Aluminium.
Here are some #AluminiumSections that have recently gone through the shop floor.
#AluminiumBending #ColdBending

#CaseStudy: Morrisons, Sittingbourne using #coldbending 🛒
https://t.co/YkCpzZoA1b #CurvedExternalSteelwork
Last Seen Hashtags on Sotwe
gummigoo nsfw
Seen from Pakistan
男菩萨
Seen from Japan
NoLimit
Seen from United States
peachyynani
Seen from United States
nsfwtw
Seen from United States
AI美女
Seen from United States
jartiyer
Seen from Turkey
ليزبيان
Seen from United States
AIイケメン部
Seen from Thailand
nolimit()***
Seen from United States
Trends for you
Most Popular Users

Elon Musk 
@elonmusk
240.6M followers

Barack Obama 
@barackobama
119.2M followers

Donald J. Trump 
@realdonaldtrump
111.7M followers

Cristiano Ronaldo 
@cristiano
110.4M followers

Narendra Modi 
@narendramodi
107M followers

Rihanna 
@rihanna
97.6M followers

NASA 
@nasa
92.2M followers

Justin Bieber 
@justinbieber
90.9M followers

KATY PERRY 
@katyperry
87.6M followers

Taylor Swift 
@taylorswift13
81.4M followers

Lady Gaga 
@ladygaga
72.9M followers

Virat Kohli 
@imvkohli
69.8M followers

Kim Kardashian 
@kimkardashian
69.8M followers

YouTube 
@youtube
68.7M followers

Bill Gates 
@billgates
63.8M followers

Neymar Jr 
@neymarjr
62.5M followers

The Ellen Show
@theellenshow
62.4M followers

CNN 
@cnn
61.9M followers

X 
@x
60.8M followers

Selena Gomez 
@selenagomez
60.7M followers





