Top Tweets for #FurlingTechnology
#Timelapse video of a nice vase printed in @ColorFabb #nGen Red and #nGen_Lux Nature Green in 0,15mm layers on the YAN 3D Printer by @FurlingTech. The result is really good and i'm happy to see YAN can print more than PLA.
#3Dprinting #Colorfabb #YAN3dprinter #FurlingTechnology
A nice shot at night from above. The #YAN3Dprinter by @furlingtech looks great in any #makerspace. I made some great prints on this little printer in 2018. #3dprinting #FurlingTechnology
@prusament really does print well on other printers. This Darth Vader was printed on the #YAN3dprinter by #FurlingTechnology in 0,1mm layers, 20%infill and a print temprature of 215 Celsius. I think it looks really good! #Prusament #PrusaResearch #3Dprinting
Superb quality Castle Tower on the #YAN3DPrinter by #FurlingTechnology. Printed in @ColorFabb #Glowfill in 0,1mm layers and 50% infill. Printspeed 60mm/s. 😍
The new Alex in Blue from @IKEAUSA is perfect for the Print Room, holding the Yan 3D Printer from #FurlingTechnology, all the tools needed and plenty of filament storage plus room for all the @Enablethefuture supplies for hand assembly. #LifeHack
Getting the rocket ready for launch! 😂 Printed on the #YAN #3dprinter by #FurlingTechnology in @RealFilament fluorescent pink. #3dprinting
I've #3dprinted this awesome new effector that i found on @thingiverse for the delta #3dprinter i'm building and it turned out great. Printed in light orange @dasfilament_de #petg in 0,2mm layers on the #yan3dprinter by #FurlingTechnology. Model by Nilz https://t.co/xZV8vbgb7K
Fresh Print from the Yan 3D Printer by #FurlingTechnology in the Furling Gold PLA at 0.20mm layer height, 10% infill and printed at 60mm sec. Trying to utilize as much of the build volume as possible looking for edge defects and this printed very clean.
I'm so busy re-organising my #3Dprinter room that i almost forgot to show you guys the awesome #timelapse video of the #JoelBot I've #3dprinted on the #YAN by #FurlingTechnology. It turned out great and YAN had no problems with this print. S/O to @apyrodesign for this epic model!
Fresh Print from the Yan 3D Printer by #FurlingTechnology using @AMZ3D Neon Green PLA at 0.20mm layer height, 10% infill and printed at 60mm sec. New firmware update also enhanced the UI usability.
More Fresh Prints from the Yan 3D Printer by #FurlingTechnology using this awesome Red PLA by @repkord, very clean and excellent detail even at 0.20mm layer height and 60mm sec print speed. And no Raft to deal with thanks to good old Blue Painters Tape.
Fresh Print from the YAN 3D Printer from #FurlingTechnology using @repkord Red PLA on the HD Lion Model printing at 0.20mm layer height, and without the Raft, going Blue Tape right on the hexagon print surface. #NoMoreRaft
A little bit of the #WaveyWednesday, this awesome model by @ferjerez3d was printed on the YAN 3D Printer from #FurlingTechnology at 0.20mm layer height in Vase Mode and turned out stellar. This little printer continues to impress.
The Print 3D Channel Maker Coin sliced in @Ultimaker Cura and printed on the YAN 3D Printer from #FurlingTechnology at 0.20mm layer height, 20% infill at 60mm sec. Very impressed with the print quality so far, just don’t like using the Raft.
Tried out some @Fillamentum #GoldHappens #pla on the #YAN #3Dprinter by #FurlingTechnology and it worked out just fine. I have to set some more retraction the next print but wow. Love the result. 😍 #3dprinting
The YAN 3D Printer from #FurlingTechnology with the built-in Camera for Time Lapse and Still Images, even remotely, is a very nice feature of this small desktop printer. Printing the Serene Elephant from @Kijaidesign at 0.20mm layer height and working on that Raft Air Gap.
The Blink Fox model by @Kijaidesign printed on the Yan 3D Printer from #FurlingTechnology turned out quite stellar at 0.15mm layer height. Still working on that Raft though, trying to dial in the Raft Air Gap, seems to work okay at about the half layer height. Few more tweaks.
The Magnetic Build Plate on the Yan 3D Printer from #FurlingTechnology makes part removal super easy, just give it a little flex and you can hear that part pop free.
The Yan 3D Printer from #FurlingTechnology printing the #3DBenchy at 0.15mm layer height, 2 perimeters with 20% infill at 60mm sec. in the Furling Yellow Gold PLA sliced in @Ultimaker Cura 3.4.1 with the supplied profile.
Last Seen Hashtags on Sotwe
Most Popular Users
Elon Musk 
@elonmusk
241.6M followers
Barack Obama
@barackobama
119M followers
Cristiano Ronaldo
@cristiano
114.2M followers
Donald J. Trump
@realdonaldtrump
111.8M followers
Narendra Modi
@narendramodi
107.2M followers
Rihanna
@rihanna
98.7M followers
NASA
@nasa
92.4M followers
Justin Bieber
@justinbieber
91.8M followers
KATY PERRY
@katyperry
89.9M followers
Taylor Swift
@taylorswift13
83.8M followers
Lady Gaga
@ladygaga
75.3M followers
Virat Kohli
@imvkohli
73.1M followers
Kim Kardashian
@kimkardashian
70.8M followers
YouTube
@youtube
68.8M followers
Neymar Jr
@neymarjr
66.1M followers
Bill Gates
@billgates
65M followers
Selena Gomez
@selenagomez
62.9M followers
The Ellen Show
@theellenshow
62.3M followers
CNN
@cnn
61.8M followers
X
@x
60.7M followers