Top Tweets for #HTPLA
🙇🙇🙇🙇🙇🙇
サンステラさんから耐熱PLAが届いたので
やりたかったことをやってみた。
腰だけ普通のPLAにして熱を加えております。
🙇🙇🙇🙇🙇🙇
#どげざくん
#Polymaker #HTPLA
ループ再生＆スピーカーON推奨
HT-PLAゲット！
耐熱っぽく赤系でグラデーション！と思ったらまさかのチョイス間違いで緑込みのトロピカルになったけどまぁオッケー🥹
（赤オレンジのFireぽい色だと思い込んでた）
さて何作ってみようか…
#HTPLA
#耐熱PLA
#Polymaker
＃サンステラ
Gods! I am so stupid. I printed the same set of parts twice! That’s 305g of wasted filament (or $10.67) down the drain…
And that’s in ADDITION to having to reprint the whole base because I previously @3DGloop’ed the parts together.
I still love this @Polymaker_3D #HTPLA-GF.
Ermagerd! Talk about running out of filament at the wrong time!🤣🤣🤣
Now this will have to sit on the bed until I can get more of the @Polymaker_3D #HTPLA-GF delivered!🤪
Thankfully, it’s on the @BambulabGlobal #X1C, so it’ll keep.
Thanks to the @Polymaker_3D #HTPLA-GF used for the printed parts, this'll be strong enough to handle the torque the scooter wheels generate.🤞🤞
I definitely picked the right filament for this project.
Unfortunately, the hard work begins once it's time for the electronics.
Another three plates of parts in the life-sized @gambodycom #K9 build using @Polymaker_3D #HTPLA-GF are DONE, w/10 total plates left.🎉
I'm down to the nitty-gritty on the printed parts go; a plate of TPU parts is printing on the @BambulabGlobal #A1 right now (w/o timelapse).
Three more plates are done in the @Gambody_com #K9 build! Getting closer to the last parts in @Polymaker_3D #HTPLA-GT (have I mentioned how much I LOVE this filament?). After that, it'll be a few plates in TPU for the flexy bits.😊
Electronics have started arriving, too!
Two more plates in the life-sized #K9 project are done. As always, these are printed in @Polymaker_3D's #HTPLA-GF on the @BambulabGlobal #X1C. I have the @MicroSwissLLC #Flowtech hardened nozzle mounted on the toolhead, which is doing a great job.
Getting closer every day!
Two more plates finished in the life-sized #K9 project! I've started to look at electronics for the top panel, and have been modding it to accommodate the screens and switches, so that's the next part I'll print!
I'll continue to say how much I LOVE this @Polymaker_3D #HTPLA-GF!
Update time! Another plate of parts in the @Gambody life-sized #K9 build is done. Printed in @Polymaker_3D #HTPLA-GF, using a @MicroSwissLLC #Flowtech hot end on the @BambulabGlobal #X1C, this filament continues to impress me. Parts are so clean, and supports pull free easily.🤯
Update on the @Gambody #K9 project:
Three more plates & one modified part printed! I modded the control panel to use 1.69" LED screens, as they're slightly larger than the holes in the original part, with curved corners.☺️
All printed in @Polymaker_3D #HTPLA-GF!
I❤️this stuff!
Huuuuuge THANKS to @Polymaker_3D for helping get me the rest of the filament I need for the #K9 build! The #HTPLA-GF is fantastic! It prints easily and the supports come off so cleanly, there won’t be much post-processing to do! Keep watching for Timelapse’s and updates.😊
For anyone interested:
@BambulabGlobal #HTPLA is FINALLY back in stock! Go get some before it sells out again.
(NOT an affiliate link.)
https://t.co/br3xISdH9v
I put the base parts for the #K9 project together last night. They fit well, and @3DGloop works just as well on the @Polymaker_3D #HTPLA-GF as it does on other types of PLA. I will, of course, have to fill, prime and paint this, but the sanding will be minimal, thankfully.😊
Another part of the life-sized #K9 project is finished. This is the last plate of the parts needed for the base, so I'll be putting them together.
Nine plates down; 27 to go.
Printed in Grey @Polymaker_3D #HTPLA-GF for extra strength. This stuff prints so nice!
Another plate of K-9 parts using @Polymaker_3D #HTPLA-GF on the @BambulabGlobal #X1C is done! Seven down, 28 more to go. But, alas, I'm out of filament again, so the project goes on pause for now.
Daddy needs to win the (nonexistent Utah) lottery to get money for filament...🤪🤣
More news on the K-9 project. Here's another timelapse. I really do LOVE the @Polymaker_3D #HTPLA-GF for this. It prints so WELL, and I don't really see any layer lines. Plus, the supports practically POP OFF!
I just wish it were less expensive. This next plate will consume
I thought I would share the progress on the K-9 lifesize project. Here are timelapses of the first three plates in @Polymaker_3D #HTPLA-CF.
This is a great material. The support removal has been nothing short of incredibly easy!
1.2 KG filament, 3 plates down, 32 plates to go.
The first parts of the life sized K-9 build using @Polymaker_3D’s #HTPLA-GF are done, and they look great. That’s 1/2 Kg right there, and with 34 more plates to go, @$30/spool it’s gonna be a long, expensive build!😫
Do you offer a “senior discount,” Polymaker?🤪🤣
Onward…
@Polymaker_3D I received the two spools of #HTPLA-GF I ordered for the life-size K9 project today. As I opened and loaded them into the AMS, I noticed the bags are NOT resealable!
Why the difference?
I've got 35 plates (below) to print, so I'll definitely need more!🤣
Last Seen Hashtags on Sotwe
Most Popular Users
Elon Musk 
@elonmusk
240.2M followers
Barack Obama
@barackobama
119.3M followers
Donald J. Trump
@realdonaldtrump
111.6M followers
Cristiano Ronaldo
@cristiano
108.9M followers
Narendra Modi
@narendramodi
107M followers
Rihanna
@rihanna
97.3M followers
NASA
@nasa
92.1M followers
Justin Bieber
@justinbieber
90.6M followers
KATY PERRY
@katyperry
86.8M followers
Taylor Swift
@taylorswift13
80.6M followers
Lady Gaga
@ladygaga
72.2M followers
Kim Kardashian
@kimkardashian
69.4M followers
YouTube
@youtube
68.6M followers
Virat Kohli
@imvkohli
68.5M followers
Bill Gates
@billgates
63.4M followers
The Ellen Show
@theellenshow
62.5M followers
CNN
@cnn
61.9M followers
Neymar Jr
@neymarjr
61.1M followers
X
@x
60.9M followers
Selena Gomez
@selenagomez
59.9M followers