Top Tweets for #Xsmart3
This has to be one of the smoothest #3DPrints I have ever done, back of the head aside.😸
The Ruby nozzle by #Durozzle is working well.
Model is (Haunted Bust) by (Bugman140) on @printablescom.
#3DPrinted on @QIDI_3dprinter #XSmart3
@Paramount3D Great Depression Jadeite PLA
This #3DPrint came out really nice.
Model is (Buddha Decoration Figure) by (Stigern) on @printablescom
0.6mm Nozzle @ 0.24 layer height on #QidiTech #XSmart3
I don't have my retraction dialed in for 0.6mm so I reprinted without. Seems I didn't need supports for the chin anyways.
I really like the color of this @Paramount3D Great Depression Jadeite.
This Voron Design Cube was #3DPrinted using a 0.6mm Ruby Nozzle at 0.24mm layer height on the #QidiTech #XSmart3.
The 1st print with this new nozzle looks good. Now I just need to see how how it does over time
My @QIDI_3dprinter #XSmart3 is pushing out the ABS parts in quick and beautiful succession.
This is why I purchased this little Enclosed #3DPrinter. To #3DPrint ABS parts fast and with very good quality. So far I have not been disappointed at all.🤘😸
#QidiTech
Well you can use the @MosaicMfg #Palette3Pro on a #3DPrinter running #Klipper & use #PrusaSlicer & forks of it like #QIDISlicer & I maybe even #OrcaSlicer.
You just need to use the p2pp plugin for PrusaSlicer/Slic3r PE.
I did this on my @QIDI_3dprinter #XSmart3 & it came out ok.
I'm glad I checked this Hotend on a diy #3DPrinter before trying it back on my #QIDITECH #XSmart3 w/ it's new can bus adapter.
Apparently when it shorted it caused damage to the connections of the temp sensor.
I can salvage everything but heater core & temp sensor as they're dead
X-smart3てQIDISlicer(1.1.1)をお使いの有識者の皆様、QuickよりExtraHighのほうが造形速度が速い気がするのですが品質はExtraHighのほうがよいのでしょうか？🤔
#QIDI #QIDISlicer #Xsmart3
1st attempt at a lithophane with #HueForge & in general.
Lost some edge detail scaling it down, especially on people & clouds but still looks ok holding it up to a light.
I particularly 💙 how the 🌕 turned out.
#3DPrinted on #QIDITech #XSmart3
Any guesses at who the people are?
Got my #QIDITech #XSmart3 #3DPrinter running.
Installed the new Can Bus Adapter Plate I purchased from @3djake_official. #DHL was able to get it here a day early.
Seems it's a newer version w/ 2 extra connections in the lower right.
Fished the repair w/ a #3DJake sticker.🤘😸
Well I finished the Complaint Department Grenade #3DPrint
Base & Number Tag are by Nick S on @printablescom.
Grenade is by QuadView on #Printables.
I made my own cotter pin for the tag in #Fusion360.
Army Color PLA is all from @repkord.
#3DPrinted on the
@QIDI_3dprinter #XSmart3
Going to try and do a Hueforge print of The John Lennon coaster from @cyanidesugar_ on #MakerWorld with my #QIDITech #XSmart3.
Not sure if it will pause for me so I can switch filaments but I am going to try it to find out.😉
Hope it works.🤞
#SaturnVRocket by Sergio Morales on @printablescom
#3DPrinter @QIDI_3dprinter #XSmart3
Had a few issues like a failed support I actually didn't need but All-In-All it came out great.
Paramount3D grey PLA
Had to heat to 240° to #3DPrint at XSmart3's default print speed.😸
Well I figured out the main reason why my @QIDI_3dprinter #XSmart3 bed mesh looked twisted. The carriage has tabs where the bed mounts to it. One was bent more than the others.
Also one lead screw was off level by 1 notch.
Got it where just 1 corner is off by .17mm
It'll work😸👍
1st attempt at #3DPrinting ASA.
No warping but maybe some extrusion issues or something at what I will call the cover / bridge layer of the print.
Still functional though.😸👍
Next part is printing right now and I am trying slower speeds for the perimeters.
#QIDITech
#XSmart3
The Bed Mesh for my @QIDI_3dprinter #XSmart3 is crazy. It's about .5mm between the highest & lowest points.
I wonder if it looks like this because I accidentally crashed the bed into the nozzle?
I also wonder if there is a way I can fix it so that it doesn't look this drastic.
🤔
1st attempt @ this #3DPrint on #QidiTech #XSmart3 failed
75% scale #Octopus by #McGybeer
1st was #PrusaSlicer w/ settings copy over from #QidiSlicer. So 2nd I just used Qidi but it also failed
On 5th try
Using squish🤞but might have to slow it down
One sucker has already failed🥴
ProTip for people that own or plan to own a @QIDI_3dprinter #XSmart3, or even their #XMax3 & #XPlus3 #3DPrinters.
Always make sure your Metal Flexplate is installed before homing. If it is not the bed will crash into the nozzle.
I found out the hard way so you don't have to.🥴lol
Last Seen Hashtags on Sotwe
Trends for you
Most Popular Users
Elon Musk 
@elonmusk
241.5M followers
Barack Obama
@barackobama
119M followers
Cristiano Ronaldo
@cristiano
113.9M followers
Donald J. Trump
@realdonaldtrump
111.8M followers
Narendra Modi
@narendramodi
107.2M followers
Rihanna
@rihanna
98.6M followers
NASA
@nasa
92.4M followers
Justin Bieber
@justinbieber
91.7M followers
KATY PERRY
@katyperry
89.7M followers
Taylor Swift
@taylorswift13
83.6M followers
Lady Gaga
@ladygaga
75.1M followers
Virat Kohli
@imvkohli
72.9M followers
Kim Kardashian
@kimkardashian
70.7M followers
YouTube
@youtube
68.8M followers
Neymar Jr
@neymarjr
65.9M followers
Bill Gates
@billgates
64.9M followers
Selena Gomez
@selenagomez
62.8M followers
The Ellen Show
@theellenshow
62.3M followers
CNN
@cnn
61.8M followers
X
@x
60.7M followers