Top Tweets for #dbSoundscape

d&b Soundscape Guide Book 3.0公開されてます。 さらっとグーグルさんと一緒に読みましたが、当然だけど知られていないこと、ヒントになること、面白いことが書いていました。 一例 ・Pick the right speakers Generally speaking, wide-dispersion loudspeakers are preferred for use with a Soundscape system. This is because Soundscape works best when listeners can hear multiple speakers within a 6dB offset. ・Depending on the level requirements, point source loudspeakers may be sufficient, especially when you consider the available SPL of 5 or more cabinets working together. However, line arrays can also be used to provide a more controlled level distribution towards the far field, especially if ArrayProcessing is enabled. Using a higher quantity of wider dispersion cabinets (120°) in the lower section of the array enhances localization at the front while maintaining clarity at the distance. ・There are two Function group Modes for Soundscape to handle subwoofers, depending on the artistic intent and the available deployment ・（Outfillについて)Because this Mode includes unique delay processing for every sound object, this allows a mono outfill to be time- aligned to the mains system for an object placed on stage and simultaneously time-aligned to the surrounds for a surround object position. ・Operation ・DIY integrations 📷 Note: These options are not officially supported by d&b, but feel free to check them out and have fun on your own! ・Commissioning checklist ・Troubleshooting あたりにヒントいっぱい。あとTipsもヒントになります。 面白いところでは、 Q: Can Soundscape be used with speakers not made by d&b? そして、何よりこれが、、、 Be sure to add a Soundscape logo to your remote views in order to guarantee that your system sounds its best! 興味ある方は、ぜひDownLoadして全編見てください！