#openflexuremicroscope - Twitter Hashtag

Africa Open Science & Hardware @AfricaOSH

over 2 years ago

They'll get hands-on experience building an #OpenFlexureMicroscope. Thanks to the project funders, Invest in Open Infrastructure, for their support in making this event possible. #AfricaOSH #OpenScience #OpenHardware #OpenSource

AfricaOSH's tweet photo. They'll get hands-on experience building an #OpenFlexureMicroscope. Thanks to the project funders, Invest in Open Infrastructure, for their support in making this event possible.

#AfricaOSH #OpenScience #OpenHardware #OpenSource https://t.co/f8DtptA0Np

0

5

1

0

66

Réseau Francophone des FabLab d'Afrique de l'Ouest @Re_FFAO

almost 5 years ago

#Makeafrica. Retour en images sur la première table ronde pour parler de santé ouverte : Une belle occasion de présenter les projets @MakersNordSud, le #OpenFlexureMicroscope #A4A #fablab #openhealth @Re_FFAO @fablab_fr

Re_FFAO's tweet photo. #Makeafrica. Retour en images sur la première table ronde pour parler de santé ouverte : Une belle occasion de présenter les projets @MakersNordSud, le #OpenFlexureMicroscope #A4A
#fablab
#openhealth
@Re_FFAO
@fablab_fr https://t.co/UWqWOrOEcP

1

16

6

0

3DPRNTMN / Bart Tangermann @de3dprintman

about 6 years ago · Leiderdorp

2/2 The @Raspberry_Pi 3B, Pi Cam v2, objectives, lenses, bolts and nuts, and other things needed cost over 300 euro. The normal version can be build for 50 euro or less. #3dprinting #3dprintingcommunity #raspberrypi #prusa3d #openflexuremicroscope

1

2

0

3DPRNTMN / Bart Tangermann @de3dprintman

over 6 years ago · Leiderdorp

The first parts for the #OpenFlexureMicroscope project are finished and look very good. The parts are printed without any support on the Original #Prusai3MK3S by @Prusa3D in the stunning @prusament PLA Mystic Brown and Pearl Mouse in 0.2mm layers. https://t.co/Xhtz55DVQr #3dp

de3dprintman's tweet photo. The first parts for the #OpenFlexureMicroscope project are finished and look very good. The parts are printed without any support on the Original #Prusai3MK3S by @Prusa3D in the stunning @prusament PLA Mystic Brown and Pearl Mouse in 0.2mm layers. https://t.co/Xhtz55DVQr #3dp https://t.co/Dx1RvXAfen

0

6

0

3DPRNTMN / Bart Tangermann @de3dprintman

over 6 years ago · Leiderdorp

I'm working on the "lab grade" version of the #OpenFlexureMicroscope and for the printed parts I'm using this stunning @prusament PLA Mystic Brown. The quality of this filament truly is perfect. The deviation on this spool was only 0.01mm and look at that perfect wind. #3Dp