HTS International

HTS International designs, engineers, simulates, and manufactures thermal management components for use in #injectionmolding and #diecasting. #conformalcooling

[HTS International @htsic]

Was great to share technical simulations from @SIGMASOFT_US showing the benefits of #conformalcooling at #NPE2018 last week. This image shows the cycle time improvements made, validated by real data collected by @UTKnoxville @iacmihq @ORNL @roanestate

[HTS International @htsic]

It was great to reconnect with customers and colleagues in person at the @NADCAhq #DCCE21 in Indianapolis! #NADCA #diecasting #conformalcooling @wjsames

[HTS International @htsic]

Come and visit our booth at M-929 @amerimold and #Molding2021 show in Chicago! @plastechmag @wjsames #conformalcooling #injectionmolding @MMTMag

[HTS International @htsic]

iTherm® #automotive #InjectionMolding core enables cooling inside of features with deep ribs.

Insert Dimensions = 250 x 100 x 40mm
Mass = 3kg

Project Goal: Warpage Reduction, Cycle Time Reduction

[email protected]

#conformalcooling #additivemanufacturing

[HTS International @htsic]

These drilled cooling channels from an iTherm® Shot Sleeve for #DieCasting enables thermal regulation of the sleeve temperature, reducing sleeve warp and wear. Two cooling circuits reduce pressure drop.

Sleeve Dimensions = D350mm x 1200mm

[email protected]

#conformalcooling

[HTS International @htsic]

iTherm® #conformalcooling for #InjectionMolding enables improved surface finish / texture. Channels move around ejector pins, vents, etc.

Insert Dimensions = 400 x 130 x 100mm
Mass = 20kg

Project Goal: Visual Improvement of Plastic

[email protected]

#additivemanufacturing

[HTS International @htsic]

This set of 36x iTherm® ring core blanks utilizes @htsic #conformalcooling technology to loop cooling around the top of the core, fed from the base. Especially useful for double-wall #injectionmolding applications.

[email protected]

#additivemanufacturing

[HTS International @htsic]

iTherm® Slide Tip for #diecasting #conformalcooling follows surface to reduce die solder. Use case is perfect for transmission cases.

Insert Dimensions = 350 x 230 x 160 mm
Mass = 72 kg

Project Goal: Solder Reduction, Lifetime Extension

[email protected]

#additivemanufacturing

[HTS International @htsic]

iTherm® example for #InjectionMolding enables #conformalcooling into a unique ring core geometry. Channels must move around ejector pins and other features.

Insert Dimensions = dia 200 x 180mm
Mass = 15kg

Project Goal: More Uniform Mold Surface Temperature

[email protected]

[HTS International @htsic]

This iTherm® application for #InjectionMolding enables #conformalcooling into a unique lifter geometry for a specific automotive application.

Insert Dimensions = 430x300x150mm
Mass = 30kg

Project Goal: Cycle Time Reduction, Improved Cooling at Lifter Area

[email protected]

[HTS International @htsic]

This iTherm® application for HPDC #conformalcooling utilizes 2x cooling circuits with Series Flow to maintain flow and keep channels clean.

Channel Diameter = 14mm

Insert Dimensions = 200 x 400 x 300 mm
Mass = 130 kg

Project Goal: Cycle Time Reduction

[email protected]

[HTS International @htsic]

Great turnout on Day 2 @EUROGUSS 2020 in Nuremberg, Germany! Please stop by Hall 9, Booth 9-522 this week to learn more about our solutions for #DieCasting #HPDC #ConformalCooling #euroguss

Sleeves, Shot Tips, Shot Blocks, Tip Lube Controllers, Rods, etc.

[HTS International @htsic]

@htsic is excited to be at #euroguss 2020 in Nuremberg, Germany. Please stop by Hall 9, Booth 9-522 this week to learn more about our solutions for #DieCasting #HPDC #ConformalCooling !

[HTS International @htsic]

Great show at #DCCT19 @NADCAhq! @wjsames #conformalcooling #additivemanufacturing #diecasting

[HTS International @htsic]

Our CEO @wjsames presenting @NADCAhq #DCCT19 paper on shot sleeve lifetime extension in #diecasting through #conformalcooling. Thanks to our research coauthor @GeneralDieCast!

[William Sames @wjsames]

@htsic Excited to participate in the @ORNL @UTK_TCE Panel on Data Analytics for Advanced Manufacturing! Join us September 5, 2019 in Knoxville, TN. #DieCasting #InjectionMolding #AdditiveManufacturing

[HTS International @htsic]

Thank you @GovBillLee , @ORNLdirector, and @ScienceUnderSec for the opportunity to speak on our USA Expansion @ #InnovationXLab @ORNL.

@htsic CEO @wjsames was honored to showcase how #conformalcooling for #InjectionMolding and #DieCasting is making USA mfg more efficient.

[Christina Fuges @MMT_ChristinaF]

@htsic CEO @wjsames will be participating on a conformal cooking panel @amerimold next month https://t.co/ANlIjToLtP

[HTS International @htsic]

@htsic CEO @wjsames had the honor to showcase collaboration with @ORNL relating to #ConformalCooling for molds and dies for #InjectionMolding and #DieCasting made by metal #AdditiveManufacturing with @SecretaryPerry @ORNLdirector @EnergyTechUSA @RepChuck

[HTS International @htsic]

@htsic CEO @wjsames had the honor to showcase collaboration with @ORNL relating to #ConformalCooling for molds and dies for #InjectionMolding and #DieCasting made by metal #AdditiveManufacturing with @SecretaryPerry @ORNLdirector @EnergyTechUSA @RepChuck

[ORNL Energy Science @ORNLEnergy]

Thank you to our #InnovationXLab sponsors!