aLoneStarLayerMaker

Printing....

[aLoneStarLayerMaker @iamJmo25]

@LEWDARIUM @ZanarGaming I went to a midnight release of gta4 in bayside marketplace miami and the first in line to buy gta4 was a young uniformed miami police officer. As he walked out with game in hand everyone in line went nuts and started cheering. There will be cops playing this on release day.

[aLoneStarLayerMaker @iamJmo25]

@JaysonJohn59721 @ArthurClaudeen There should be some instruction in files . I still have some more parts to print and await hardware before i attempt to put it together.

[aLoneStarLayerMaker @iamJmo25]

Ita coming together slowly but surely.. @ArthurClaudeen

[aLoneStarLayerMaker @iamJmo25]

@BreachBangKill @ArthurClaudeen I also use 30blkfde settings for ALL my nylon prints now cans/frames no going back!

[aLoneStarLayerMaker @iamJmo25]

@gunfuzled Interesting...

[aLoneStarLayerMaker @iamJmo25]

@5acramenace @methlakecity @ArthurClaudeen Everyone I follow that tried ht pla pro gives it a 👎 for 3d2a uses. I have yet to try it honestly.

[aLoneStarLayerMaker @iamJmo25]

Let check the chinese oven....

Baking me a @ArthurClaudeen GP9 SA

Ingredients: Fiberon Pa612cf15 baked at 300c...

[aLoneStarLayerMaker @iamJmo25]

@prestonlewis77 Light chieseling helps and do it asap after print finish cooling down. Tree supports might be easier with ppa.

[aLoneStarLayerMaker @iamJmo25]

Ok maybe ppacf supports was not ideal...but I got em off w/o scuffing can..

[aLoneStarLayerMaker @iamJmo25]

@olahf84 @ArthurClaudeen I never used that stuff, i reckon see if their print/chamber/bed temps match what your printer can match. And work from there. I love to try peek-cf but bambu labs cant get past 350c😡

[aLoneStarLayerMaker @iamJmo25]

@gunfuzled I really need to do this. Too many things I wanna print with only 1 printer 😅

[aLoneStarLayerMaker @iamJmo25]

Lower frame looking good for original year old hardened nozzle, 3 hrs left print time.

[aLoneStarLayerMaker @iamJmo25]

@datblakhoe @ArthurClaudeen I have 2 rolls of fiberon pa612cf15 that been sitting for a year outside its packaging , I finally splurged on a sunlu e2 I started putting them to use. I have 1kg roll of ppacf core im using for cans. I love how the pa612 looks w/0.15 lines very clean and pro looking!

[Gat no Jutsu @xXMemeMagicXx]

Something very art deco about this design

[aLoneStarLayerMaker @iamJmo25]

@xXMemeMagicXx I printed it well. 🤗

[aLoneStarLayerMaker @iamJmo25]

@ExplosionsOf_BS

[aLoneStarLayerMaker @iamJmo25]

@abelm3404 I recon that is mainly for rifle rounds (5.56)

[aLoneStarLayerMaker @iamJmo25]

Kvp boostered ftn6 is a big boi. Hopefully testing will go without a hitch. Debating on weather to wrap it.

[aLoneStarLayerMaker @iamJmo25]

@RickyLaFleurRX7 @ArthurClaudeen Thanks man, I am learning as well not a pro at this, but getting the filament super dry and making sure the right settings apply for the filament you are using.

[aLoneStarLayerMaker @iamJmo25]

@ATFirearmsTTV Thanks, I blame my overpriced sunlu e2 Drying it for 24hrs 100c then followed by a 24 hour print job from dryer, I can berely touch filament loading in my printer 🥵

[aLoneStarLayerMaker @iamJmo25]

@SamuelRozi92287 @ArthurClaudeen Lol Its the sunlu e2 I believe. I dry and run the filament straight from dryer 100c. I dont anneal usually but its worth trying out as dryer goes 110c.