TyeMadeIt

Civil Engineer by day, woodworker by night. Quality over quantity.
#homedecor, #art, #woodworking, #epoxy

[TyeMadeIt @it_tye]

@OnTrac_Shipping @srslykarish Asap! Check your dm, please!

[TyeMadeIt @it_tye]

Sometimes when I burn Lichtenberg figures it burns off the edge of the wood which I personally really like. But in order to make it functional again it needs to be filled with epoxy. I like to use blue painter's tape… https://t.co/RU3KUfJGsC

[TyeMadeIt @it_tye]

This was my first time cutting plastic with a CNC. Just a warning, it's very satisfying to watch in person. This project was to revamp an old spinning wheel used to win prizes. I think it turned out great but what… https://t.co/cP6jjJemz9

[TyeMadeIt @it_tye]

Just finished up this blue and green epoxy colored skateboard. If you were picking a color for your own skateboard, what color would you pick?
.
Epoxy: @TotalBoatShow
Color: blackdiamondpigments_com
Finish:… https://t.co/EIpyVgCaZS

[TyeMadeIt @it_tye]

Serving tray #2... I ended up buying a different heat gun which made a world of a difference and trying a different type of white for the pigment. This process is new to me but I wanted to give it a shot. If any of… https://t.co/XnthrJMcd9

[TyeMadeIt @it_tye]

I usually remove the Bark on my pieces because it eventually becomes loose and falls off. What method of bark removal do y'all use?
.
.
.
.
.
.
#handmade #woodworking #customfurniture #charcuterieboard #woodworker… https://t.co/1VtENT4mcZ

[TyeMadeIt @it_tye]

Coming in HOT after this Larbor Day weekend. Have you ever used an Infrared camera before? This was my first time using one from flir and it's so awesome. This is what 9,000 volts of electricity looks like as it… https://t.co/hRWKKKd1nm

[TyeMadeIt @it_tye]

I was at joann_stores
the other day and saw this wood tray and thought, "I think I'll pour some epoxy in there and try something new". So...here is my 1st attempt at making a wavy ocean tray. I think I'll do… https://t.co/ZmHBDANyAh

[TyeMadeIt @it_tye]

This week I finished up these 5 large Black Walnut art pieces that are going into the entry of a new office building. The cool part about this project is I'll actually work in the same building and I'll be able to… https://t.co/B6coetIevd

[TyeMadeIt @it_tye]

I wanted to do a quick comparison between my smaller 5in Makita and my 6in Festool Rotex. I've noticed a huge increase in time saving with my Rotex. As you can see in the video, the Rotex is hard to even hold onto… https://t.co/zcErYGnHBU

[TyeMadeIt @it_tye]

Half Wood/Half Epoxy Charcuterie Board. When I came up with the idea for this project a while back I didn't have a CNC and it felt like an impossible project. But, now that I have my X-carve from @inventables it… https://t.co/IPSCd6fTOT

[TyeMadeIt @it_tye]

SOUND ON...Happy 4th of July to all. Did you know the X-carve CNC by @inventables can sing songs? I didn't either until I saw stevestoncreative. Thanks for the idea and hope everyone has a safe and fun 4th!… https://t.co/V7PSd8Nurr

[TyeMadeIt @it_tye]

A few months ago I made this garden sign for a wonderful lady that I consider family.
.
.
I get a lot of messages about which products I use so here's how I made this.
I used my X carve CNC by @inventables to cut… https://t.co/Z1gVQcFL5E

[TyeMadeIt @it_tye]

I NEED YOUR HELP...looking for ideas on a name for this art piece? Well, more specifically, 5 of these but 17in wide and 6 feet tall each. They will be displayed on a wall side by side. Leave your ideas below in the… https://t.co/KzScVRCZMy

[TyeMadeIt @it_tye]

SOUND ON-I was finally able to deliver these stairs to Kianoa and his family. I've worked on a lot of projects so far in my life and this project was the most special for me. I'm so thankful to have met Kianoa and… https://t.co/tldwu985iN

[TyeMadeIt @it_tye]

This is the 1st time I've used this color green in Black Walnut and I'm loving it! Do you like the color and contrast? Let me know in the comments 👇👇
⚡
Epoxy from @TotalBoatShow
Pigments from @JacquardProduct
Color… https://t.co/BQQ7w2j1s0

[TyeMadeIt @it_tye]

It's always nice when you have a great repeat client that comes back for more of your art. This 18in diameter Charcuterie board was requested and it was a lot of fun making. I'll be making a video on the process… https://t.co/Z0CRglwmc4

[TyeMadeIt @it_tye]

This weekend I continued to work on the stair case build. I ended up making a locking mechanism with a wooden dowel that slides in and out of the metal pipe you see here. The slot I'm cutting allowed me to insert a… https://t.co/5JdVQp89z2

[TyeMadeIt @it_tye]

I've been using this Japanese pull saw by suizan_japan on this stair project and let me tell you how enjoyable it is to use this saw. It's so enjoyable that I'm using it to cut 15in of plywood instead of a power… https://t.co/KVVApE0Ij5

[TyeMadeIt @it_tye]

It's amazing how easy it is to design and cut a perfect circle using my @inventables xcarve. In this video I'm cutting the back of a Charcuterie board for a hanging bracket. The bracket… https://t.co/AreFche1yr