jjsch-dev

Simplicity is the ultimate sophistication

[CNX Software @cnxsoft]

Board based on Raspberry Pi Pico 2 W design, but with 16 MB flash, 41 GPIOs, and USB-C port.
https://t.co/3VYBejFxel

@Waveshare00 RP2350B-Plus-W can offer more GPIOs thanks to the Raspberry Pi RP2350B MCU and 15 pads on the bottom side of the board. It also adds a Reboot button, an extra user LED, and a footprint for a PSRAM chip.

It's compatible with the Raspberry Pi Pico C/C++, MicroPython, and so on...

[CNX Software @cnxsoft]

USB 3.0 camera board based on @WCH_TECH CH32H417 RISC-V MCU
https://t.co/b7L7OIVbEZ

XPU Labs’ Petros CH32H417M Alef is a Raspberry Pi Pico-sized board based on the CH32H417M dual-core RISC-V MCU with 896KB SRAM and 960KB Flash. It leverages the MCU's USB 3.0 and DVP camera interfaces using a 40-pin B2B connector for a 2MP OV2640 camera module, and also features 20-pin GPIO headers that follow the Raspberry Pi Pico’s pinout.

There's currently no specific code sample for the board, but we noticed the CH32H417 C SDK comes with a USB 3.0 UVC DVP camera sample that should convert it into a standard webcam.

[ReMIX35 @ReMIX35_project]

The ReMIX35 Display Board v0.3 is here. ⚡
Our latest custom display PCBA iteration.
Now comes extensive validation, fine-tuning, and another step forward for ReMIX35. 🛠️

#ReMIX35 #CrowdSupply #PrusaMK3S #3DPrinting #MakerCommunity

[ReMIX35 @ReMIX35_project]

Your MK3S/+ still has work to do.
With ReMIX35 Upgrade the electronics and keep the machine you trust.
ReMIX35 is in Pre-Launch on Crowd Supply.
🔗 Link in bio.
#ReMIX35 #PrusaMK3S #OpenSourceHardware #3DPrinting #CrowdSupply

[jjsch-dev @JjschD]

@EspressifSystem Hi, we at Xdege32 would like to try it. https://t.co/XkZ60YxABP

[John Lee @EspressifSystem]

Hey folks, good things are coming your way. ESP32-S31 dev kits. I have about 100 of these to give away. Write to me and tell me what you want to do with it. ASAP, while boards last. #ESP32S31 #Espressif

[jjsch-dev @JjschD]

@EspressifSystem Hi, we at Xdege32 would like to try it. https://t.co/XkZ60YxABP

[jjsch-dev @JjschD]

@BambulabGlobal Buen día.

[ReMIX35 @ReMIX35_project]

Komodo 3000 Secret Stash Box por ManuelM https://t.co/131EtEvs2X (via @printablescom)

#remix35 #crowdsupply #prusa #malcolm #malcolminthemiddle

[ReMIX35 @ReMIX35_project]

Mira este video de Instagram de @remix35_project https://t.co/NA51FpVjmm

[ReMIX35 @ReMIX35_project]

Checking in from the workshop. 🌌

Stitch joined us today for a test run. Progress on ReMIX35 continues, but we always find time for some fun.

Clean results, happy Monday. 🚀

Credits:Model: @ChelsCCT via @printablescom

#remix35 #crowdsupply #lilostitch #3dprinting #prusa

[ReMIX35 @ReMIX35_project]

Each design follows the logic of its interface. ReMIX35 adds an LCM touch panel — so we moved storage to the mainboard, where it fits naturally and works more efficiently.
Pre-launch: https://t.co/LuJpOMVOix
#ReMIX35 #RepRap #OpenHardware #CrowdSupply

[CNX Software @cnxsoft]

.@ST_World launched its first Arm Cortex-M85 STM32 microcontroller.
https://t.co/qIpG03DNrV

It's also the first microcontroller manufactured with an 18nm FD-SOI process. Clocked at 800 MHz, it provides an update to the STM32H7 Cortex-M7 family, offering improved performance, particularly for Edge AI applications, thanks to Arm Helium/MVE support.

The STM32V8-DK development kit and Nucleo-V8 board are coming soon. It's already used in some @SpaceX Starlink satellites, and general availability is planned for later in 2026.

[hackaday @hackaday]

Reverse Engineering the Miele Diagnostic Interface https://t.co/azsDyYSw81

[Shawn Hymel @ShawnHymel]

Time for another #ROS video! In the 8th episode, I cover parameters and how to use them in nodes. Check it out!
👇👇👇
Link in replies

#robotics #programming @OpenRoboticsOrg

[CNX Software @cnxsoft]

Thin @TheMeshtastic GPS tracker for outdoor use.
https://t.co/CORpmS6RFM

@RAKwireless has just launched the WisMesh Tag IP66-rated Meshtastic device for GPS tracking and messaging. It is based on Nordic Semiconductor nRF52840 BLE SoC and Semtech SX1262 LoRa transceiver and equipped with a 1,000mAh battery.

The Meshtastic firmware is pre-installed, so it is ready to use right out of the box.

[ReMIX35 @ReMIX35_project]

Connector-by-connector comparison: Original Einsy RAMBo (RepRap project) vs ReMIX35 Einsy.
The ReMIX35 Einsy adds a few connectors for new functionalities but keeps the old ones in the same place, now with 32-bit processing and modern connectivity.
#ReMIX35 #CrowdSupply #RepRap

[ReMIX35 @ReMIX35_project]

Compatibility matters. ReMIX35 keeps the original Einsy RAMBo form factor and connector layout—because upgrades should be easy.
32-bit power, familiar footprint.
Join the pre-launch → https://t.co/LuJpOMVgsZ
#ReMIX35 #RepRap #OpenHardware #OpenSource

[ReMIX35 @ReMIX35_project]

Original Einsy RAMBo (black) vs ReMIX35 prototype (green)
Same form factor + connector layout, now with a 32-bit CPU.
Built as a natural evolution of a great open hardware design.
Join the pre-launch → https://t.co/LuJpOMVgsZ
#ReMIX35 #crowdsupply #OpenHardware #RepRap #sudoTek

[ReMIX35 @ReMIX35_project]

The best hardware deserves the best electronics. ReMIX35 is the upgrade designed to perfectly complement your MK3S/+’s robust mechanicals. It's about empowering what you already have.
#ReMIX35 #crowdsupply #opensourcehardware #sudoTek #3DPrinting #Electronics #DIY #PrusaUpgrade