john3D

Happy Retro Gamer.
3Dprint & CAD Hobbyist

[TECKEL STUDIOS - TAPANCLIC @quoindy]

In this scenario, there is a grounded ship that the player can walk into. I’ve created two versions; which one do you think is better?

Wishlist now:
https://t.co/jxbcYJ1ZR9

#IndieGame #GraphicAdventure #PointAndClick #PixelArt #GameArt #GameDev #IndieDev

[nand2mario @nand2mario]

🚀Here’s the z386 write-up: four months of work bringing the original 386 microcode to life in a real FPGA processor design.

https://t.co/BBt2pBVtqE

[IAMLIUBO @its_hard_2_name]

Holly!I can’t believe this, you can play game boy on Paper S3 now.

[john3D @john3D_]

ChatGPT Images 2.0 vs ScummBar ❤️

[nand2mario @nand2mario]

Squeezed more performance out of #386fpgacore on DE10-Nano 🚀
• Optimized branch prefetch → lower CPI (line 1→2)
• Reworked paging + L1 → 85MHz (from 75MHz, line 2→3)
≈30% uplift. This little core has serious potential.

[nand2mario @nand2mario]

Good progress on #386fpgacore last month 🚀
Now running on Tang Console 138K + DE10-Nano (MiSTer)
+I/D caches, lots of fixes
Doom runs
75MHz with decent CPI
3DBench: 24.1 FPS
Possibly the fastest 386 ever 🙂

[Todd Gill - Retro Frog @ToddsNerdCave]

Do you love the #Gamecube, but don't love the console's loud cooling fan?

Upgrade the 'Cube with our 40mm fan adapter plate and cable combo. Just add a 40mm 12v #Noctua fan and enjoy a less noisy console!

https://t.co/peJ9mrODCD

[Stanislav Parhomovich @Stanislav_Prh]

Added SNES Brightness. Superswitch HD now outputs 24-bit HDMI. Scanlines added. Scale2x/3x edge smoothing added. English audio translation will be generated soon.
https://t.co/BS990UjddL

[Stanislav Parhomovich @Stanislav_Prh]

I'm working on a digital video output for the SNES. It's conceptually similar to the Megaswitch HD. No analog RGB. This is a demo of the prototype.
https://t.co/jhllTTaAND

[innocuosmuffin @innocuosmuffin]

Soon...

[RndMnkIII @RndMnkIII]

#Analogizer WIP support for Pocket Quake:

[john3D @john3D_]

Port of the Sega Master System-Core for Tangnano20k based on smstang by @nand2mario

[Eduart Misiraj @MisirajEduart]

Build myself the best VGA dongle for the Playstation 1, 2, 3
- up to 1080i for the PS2/3
- switch to toggle between PS1 and PS2/3
- guncun support

Created by Jeff Chen

[john3D @john3D_]

@DanielWienerson First step to the next masterpiece 😀

[Dan Peterson @DanielWienerson]

Ok, folks. Here's Voxel Duke 3D Version 1.0!

I'm gonna take a break from the internet for a bit. Have fun, I hope everything works.

https://t.co/7mV8U1BJ9G via @moddb

[Aruma Studios 👻 Shadows of the Afterland @ArumaStudios]

🎙️ Our demo is now FULLY VOICED!

Seeing dead people was just the beginning. Now you hear them too.

Try the Shadows of the Afterland demo during Steam Next Fest (Oct 13-20) and unravel a supernatural mystery in 1960s Madrid.

👻 Play now: https://t.co/5bDzaPY8A9

#SteamNextFest

[BNinja @Bedroom_Ninja]

I’m off to Copenhagen for a week tomorrow, taking the #TangFPGA with me for some NES/SNES fun after the family’s gone to bed!

Which colour shell looks best, Red vs Blue?

Thanks to @nand2mario for the amazing #TangCore!

Not bad for ~$40

[nand2mario @nand2mario]

My 286-class CPU (real-mode only) is finally working in sim and we have PC-AT BIOS, VGA and IBM Basic working.😀 The CPU is written from scratch and uses a 5-stage pipeline, aiming to be fast enough to run early 90's games. The final core will be in between ao486 and PCXT_MiSTer.

[Consoles4You @Consoles4You]

Prepopulated Neptune pcbs have arrived and are up for order.

[Mr.GN @guerinnorman]

@blackhawkadvent Happy #PointNClickFriday ! I want to share this because the creator doesn't have a twitter account. The classics series Gobliiins is back with Gobliiins 5 ! He's working right now on the 6th Game you can do a late pledge below !
Please leave a review !
https://t.co/Z91xCCTdM0