Head of Technical Stuff @haminawireless. CWNE #238. I break Wi-Fi hardware so you don't have to. Fueled by coffee, airports, and too many APs on my desk.
Heading to #BrainstormPoconos with @HaminaWireless. Sunday 12 to 2 PM ET is a Wi-Fi 7 session on design, validation, and troubleshooting, with real interference and capacity examples. Monday we're at the Expo doing demos. Bring your weirdest Wi-Fi 7 problem. https://t.co/b4Zpl8ciLg
New @HaminaWireless Planner release: simulated heatmaps up to 4.9x faster, cross-floor AP coverage in reports, contour lines in PDF reports, and live AP status in Live View. https://t.co/uQaDFuigA0
Orb added live sharing: send a link, and the other person sees live metrics and up to 24 hours of history, then it expires after 10 minutes. Easier than troubleshooting "it's slow sometimes" over email. https://t.co/DX5o0xIpqH
Wi-Co Utrecht is Wednesday. Talks on ditching the term CCI, what "MIMO gain" really means, and the wired network. If you're in Europe, go: https://t.co/2T8nSNdRqy
Wi-Fi 8 doesn't get faster. The changes are APs coordinating with each other and clients roaming without dropping links. A lot of it is optional, so "Wi-Fi 8" on the box won't always mean the same thing. @Cisco's Matt MacPherson explains: https://t.co/IdcR1WIFTt
@WiFiAlliance's new "Wi-Fi Happens Here" page is a solid cheat sheet: Wi-Fi 8 aimed at reliability (tail latency, roaming loss), coordinated multi-AP, and standardized datasets for AI-managed Wi-Fi. Peak Mbps was never the hard part.
https://t.co/iwxDRx6yrS
Missed Storytime with Joel? 20-minute recording of the latest Hamina updates is up. Nice way to catch the weekly chaos without reading every release note. Next live is Dec 2.
https://t.co/1M3hr93ugy
@HaminaWireless
Love a real field note. Oluseyi clips a Hamina Clip on pretty much everything, keeps it light, and even pairs it for a quick RF read when he needs one. Do you reach for yours every time? No. Take it almost everywhere? Yes.
https://t.co/Z2gVlGsbxK
New @HaminaWireless release: APs over their client limit or short on PoE now get a badge right on the map, and HPE Juniper APs in Live View no longer all claim to be Wi-Fi 7. Best line in the notes: "We meant to do that earlier but... oops." https://t.co/8rNTt1vB2F
Wi-Co DC was a good day. A packed room in Ashburn: Troy Martin on buffer bloat and Little's Law, Eva Santos on Miracast and P2P casting, Firas Shaari on how the clients decide how your network works, and @mistermultipath on AI turning our phones into uploaders. Then most of us hit the range, because nothing says 'wireless community' like hearing protection. ๐ง
https://t.co/5TN5KVCc5S
The @HaminaWireless APAC crew is at #CiscoLive Melbourne next week, stand B36. Come for the heatmaps, stay for the walrus energy. The photo is accurate, they really are that goofy.
https://t.co/c51F9pLQlC
One lens on a catwalk, sixteen independent sectors aimed at the seats. That's not your average stadium antenna pattern. ๐๏ธ
Extreme Multibeam from @ExtremeNetworks is now modeled in @HaminaWireless Planner: MatSing's 16-sector lens with sixteen Wi-Fi 7 APs behind it. It's a very different design problem from under-seat or directional, and now you can plan all three side by side instead of guessing.
Big thanks to Joel Crane and Timo Vanhatupa for doing the heavy lifting, and to @mistermultipath for the walkthrough.
https://t.co/NDCE3WJ4dr
UK adds 6425 to 6585 MHz for low-power indoor Wi-Fi Nov 10, no AFC needed. Three 160s become four. Standard power still waits on AFC providers. EU, your move. @Ofcom
I have seen the Clip in a lot of places, but never in Darth Vader's hands. ๐ Thanks Harry Norman!
The update he's describing is a fun one. A Clip can now run as an Orb sensor, so it can sit there catching the intermittent problems that never show up while you're actually walking the survey. And the roaming data on the network connectivity heatmap lets you show a customer where the device moved, instead of explaining roaming with hand waving and a whiteboard.
Also, the purple light really does look better on the dark side.
https://t.co/rQTZqfkuPt
Last call: Wi-Co DC is Tuesday at XCAL in Ashburn. Yes, a shooting range. ๐ฏ L4S, P2P casting, healthcare wireless, the future of Wi-Fi, and a room full of good people. Come hang out. https://t.co/RDt9M1zEuk
One week until the Hamina DDD Meetup in Melbourne. Drinks, demos, and dorking out, Nov 9 at 7 PM. ๐ฆ๐บ Meanwhile it's November in Wisconsin and my hammock is under a tarp next to the snowblower. Melbourne folks, go bring your weirdest floor plan. https://t.co/UlzC3VJh5Z
Josh and Daniel did a great walkthrough of Orb, and then Jussi showed up with a vibe-coded dashboard reading Orb data off his Clips at the show. Nothing says 'CEO' like live-demoing your weekend project to a room full of Wi-Fi engineers. Worth the watch if you care about what the network actually feels like to clients.
@orbforge
https://t.co/ufZBfvDupW
Top 3 of the Deloitte Fast 50 in Finland. ๐ซ๐ฎ
I'd love to say it's all the hardware I break in the lab, but it's really the team and the folks who trust us with their networks. Proud to be part of this crew.
Also, huge respect to Minna for the 3-second-notice video. That's the real growth story. ๐
@Deloitte
https://t.co/egxVdnpVmQ
Joel Crane is going live the first Wednesday of every month to walk through what we just shipped. First one is Nov 4, 8AM EST / 2PM CET. Bring questions. Bring coffee. He's already read the release notes so you don't have to.
https://t.co/CSuChXkqyb
Catching up at Wi-Co Texas: Jeff O'Bryan of Oberon on healthcare wireless and code compliance, then Brad Howell of Wyebot on why clients roam. The AP can suggest, the client decides, and most roams happened in standby or right after wake. Sleepwalking, not misbehaving. ๐