Franz Jungreitmayr

[Franz Jungreitmayr @jungreitm]

little #bezier coding exercise materialized by #plottertwitter

[Franz Jungreitmayr @jungreitm]

@revdancatt Having run the numbers, you actually only had a 1 in 30 chance to end up with one class amounting to 15 or more pieces.

[Franz Jungreitmayr @jungreitm]

@VBohrnMena Was will man auch erwarten, wenn das erklärte Unternehmensziel die möglichst kostenarme Etablierung eines Plattformmonopols in einem zuvor funktionierenden aber eben sehr kleinteiligen freien Markts ist?!

[Franz Jungreitmayr @jungreitm]

@WolfgangMueckst @agesnews Eine logarithmische y-Achse, die drei Kurven nebeneinander oder überhaupt in ein gemeinsames Diagramm, dann wird am Ende gar noch eine Infografik draus.

[Franz Jungreitmayr @jungreitm]

Made my DraftPro use a paint brush. sort of... #plottertwitter

[Franz Jungreitmayr @jungreitm]

Smokey Star, #plottertwitter

[Franz Jungreitmayr @jungreitm]

@joshu Scale up and apply some sort of saturation/soft clipping, the most simple version probably being tanh(a*noise(.)), but any sigmoid function will potentially do: https://t.co/s6XDc6QYru

[Franz Jungreitmayr @jungreitm]

@joshu The principal axes are the eigenvectors of the inertia tensor: https://t.co/2sSTYiC9FO
https://t.co/8qr5zX2TVB

[Franz Jungreitmayr @jungreitm]

rippled fluxes. ballpoint pen, 170 gsm paper (DIN A2), #python, #plottertwitter, #generativeart

[Franz Jungreitmayr @jungreitm]

fluxes. ballpoint pen, paper (DIN A2), #Python and #plottertwitter

[Franz Jungreitmayr @jungreitm]

#plottertwitter

[Franz Jungreitmayr @jungreitm]

#plottertwitter #creativecoding #dithering

[Franz Jungreitmayr @jungreitm]

@joshu Yes, sorry for guessing, CT only relates to the internally interpolated commands (sometimes such settings may still have side effects). Maybe back then they did not implement clever path planning and instead just slowed down the feed rate for curvatures below a fixed threshold.

[Franz Jungreitmayr @jungreitm]

#plottertwitter or #handdrawn ?

[Franz Jungreitmayr @jungreitm]

@joshu If the segments are long enough everywhere (1mm is definitely enough), it may also just be a result of accuracy setting (CT) and the acceleration constraint.

[Franz Jungreitmayr @jungreitm]

@joshu I’d assume it attempts to go as fast as with the long line segment all the time, but has to slow down to process the commands in time.
Experienced this phenomenon, at least with other CNC machines.