ɯɐן ǝɔuɐɹɹǝʇ

Stylux Studio Producer, Designer, Marketer & Photographer

[🇨🇳🇺🇸🇪🇺LDOJason @LDOMOTORSJASON]

Next Tuesday! Can't be there personally this year, but LDO keep sending our love for the massive holiday giveaway.
Check the stream, send your love, and win all LDO new productions from this year.
LDO Micron Kit,1 winner
LDO Stealth Changer Kit (2.4 with 4 heads),1 winner
LDO Delta Flyer Kit,1 winner
LDO Box Turtle Kit,1 winner
Jabberywocky Toolhead,2 winners
LDO AWD CNC Kit,2 winners
LDO Compact PSU,5 winners
LDO ABS Filament 2 Spool Pack,10 winners
(photo by AI, ignore the weird part if you saw it)

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@LDOMOTORSJASON Can't wait to see this operating on Jabberwocky!

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@ArmoredTurtleRK @LDOMOTORSJASON Looks fantastic!

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@SScupts @LDOMOTORSJASON @West3DPrinting @Fabreeko_Hector Currently there is a mount for printers that use MGN9 or MGN12 slides (ex. Voron 2.4 or Trident) and there is also a mount for V0. More to come.

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@grogyan @LDOMOTORSJASON @West3DPrinting @Fabreeko_Hector Not yet. The components just need to be mirrored and it should work, but that has not been tested.

[🇨🇳🇺🇸🇪🇺LDOJason @LDOMOTORSJASON]

It's there in resellers store now, after about a year R&D with @kinematicdigit, and under around 20 beta testers's continued running and testing; we are finally confident to share this new designed Extrude/Toolhead with Cutter - JABBERWOCKY to you, the important community!
Grab it to check how awesome it will be, I bet you will like it more or less.
https://t.co/8FqB6FCS5N
https://t.co/eIOGpOM4O7

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@MR_TMRW @LDOMOTORSJASON Currently it has been tested on V0, Micron, V2.4 and Trident. More to come as more mounts are made for them. But pretty much printers that use MGN9 or MGN12 linear rail slide are compatible.

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@moppelmat @LDOMOTORSJASON It is possible to work with Boop. That still needs to be looked at in detail. There nozzle lighting is modular so it can be paired with a nozzle cam.

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@grogyan @LDOMOTORSJASON The geometry of the extruder would need to be mirrored. The config would also need to change the rotating directions as well. Because of this all the wiring needs to route to the other side. Shouldn’t be a big deal just needs to be created.

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@grogyan @LDOMOTORSJASON Hi Gary, it is possible to mirror the design but need to review wire lengths since it is currently optimized to the toolboard.

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@baloo_bjornen @LDOMOTORSJASON Nothing was from dragonburner in this design. This is not a toolhead alone but a an entirely new Extruder and toolhead combination. The only thing this shares with dragon burner is that both designs has similar screw mounts that come from Voron Mini Stealthburner.

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

@webmeisterBud Need to get you an orange polo and start calling you Uncle Bud!

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/wnsNDRXiwA #marketing #digitalmarketing

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/9j2pt1DQUB Thanks to @Tess_blue815 @LitvakSteve #design #low

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/lu0EViVyyq Thanks to @KimDoNL #socialmedia #marketing

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/4hHItKsroi #marketing #startup

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/lJrx0Bi2fL #socialmedia #marketing

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/WZozqBBgaA #marketing #unity

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/P3YLwSKySd #socialmedia #marketing

[ɯɐן ǝɔuɐɹɹǝʇ @kinematicdigit]

The latest KD's Creative Source! https://t.co/W6rqe6vjEj Thanks to @JeremyLoveday #wordpress #marketing