Todays work on site is replacing this electric steering rack of a toyota mark x.The main signs of a worn steering rack are
• Heavy or stiff steering
• steering wheel warning light on the dash
• Incostitient or jerky assist
• Wheel fails to return to center
• clunking noises
The functions of a fuel injector are:
1 Atomize fuel
2 control fuel volume
3 Time fuel delivery
4 Balance air fuel ratios
It mixes evenly with air for efficient burning.
We start the day with working on this mistubishi rvr which came with an over heating issue.The main causes of vehicle overheating are
1 low coolant level
2 faulty thermostat
3 water pump failure
4 cooling fan issues
5 clogged radiator
6 low engine oil
7 blown head gasket
Starting the day with changing the pvc valve of this Toyota rav4.The functions of a pvc valve are as follows
1 Controls emissions
2 Prevents oil leaks and blown seals
3 Keep engine oil clean
4 Acts as a safety check valve
5 Improves fuel efficiency and performance.
TODAY I BRING YOU 5 MAIN REASONS WHY A CVT FAILS!
1~Excessive torque and vehicle weight overload which strains mechanical and thermal limits of belts and pulleys.
2~Degraded,low or contaminated fluids;Using wrong fluid type,letting levels go low or neglecting fluid changes causes loss of hydraulic pressure and massive internal damages
3~Overheating;When a vehicle operates in heavy stop-go traffic ,hot climates or towing loads without adequate cooling the fluid breaks down thermally triggering belt slippage
4~Worn push belts and metal chains; A CVT transfers all engine power through a single steel chain across variable width cones and over time the chain slips,grooves or even snaps due to a drop in fluid pressure caused by chain physical wear or high torque pressure.
5~Pulley surface damage and wear;Small metal debris (from initial break in or component wear) circulate in the fluid and score pulley surfaces making the chain barely gripping properly leading to severe juddering and transmission failure.
Good morning my people