cncmachinetools

CNC Machine Tools Ltd is one of the largest and longest established companies specialising in the servicing, repair and maintenance of all types of machinery.

[cncmachinetools @machine_support]

Customer reported a knocking noise and backlash in X axis. Quick look at the coupling and all is revealed. New insert fitted and back in production. #productivity #maintenance_support #bridgeport #breakdowncover

[cncmachinetools @machine_support]

Tool not gripping. Draw bar stripped and collet removed. Springs checked and greased, collet replaced, draw bar fitted and pull back force checked. Back in production. #Maintenance #Productivity #Doosan #service @machine_support

[cncmachinetools @machine_support]

Bellows damaged allowing debris ingress on the ball nut. Ballscrew refurbished and bellows replaced. @machine_support #preventative_maintenance #ukmfg #Production Contact: CNC Machine Tools Ltd. for further information email: [email protected]

[cncmachinetools @machine_support]

Changing out old Daikin oil chiller. Old unit out, new piping sourced #stauffeastanglia. New chiller mounted onto machine tool, connected and commissioned. #ukmfg #productivity @machine_support

[cncmachinetools @machine_support]

#machine #relocation machine tool decommissioned and relocated 50miles to new premises and installed. Thanks to @dw-transport.co.uk for all your help. Machine back in #productivity helping customer with urgent order. #UKmfg @machine_support

[cncmachinetools @machine_support]

Lubrication oil usage high. Found flow units letting through oil constantly during #preventative #Maintenance. Manifolds replaced and fitted. flow tested back in #production #ukmfg #Manufacturing. Coolant #contamination reduced, improving lifecycle

[cncmachinetools @machine_support]

Damaged power chain removed and new @igusUK chain fitted. New cables pulled through and wired in #ukmfg #reactive #maintenance increasing reliability and #productivity. For more information [email protected] @machine_support

[cncmachinetools @machine_support]

Turret oil leak, unit stripped and damaged o ring found. #Maintenance #Productivity #UKmfg #manufacturing #Engineering all o rings replaced and turret rebuilt @machine_support. Machine #alignments reinstated.

[cncmachinetools @machine_support]

When you arrive to be told we may have had a bump.
But this is what we do.#maintenance #alignments #productivity #ukmanufacturing @machine_support #MFG

[cncmachinetools @machine_support]

Spindle tight. Investigation found severe contamination. Unit stripped and cleaned. Bearings replaced, preload set, run out checked and back in machine and back in production #UKmfg #Productivity #preventative #Maintenance @machine_support

[cncmachinetools @machine_support]

xsTECH Router from @Tormach the #educational machine tool is small enough to fit on a desktop. Designed to be easy to assemble and program using path pilot conversational programming. Visit https://t.co/zRC4ojJwn7 for more information. UK support https://t.co/KCuNZlXZQ1.

[cncmachinetools @machine_support]

Walking the dog this morning and came across this solitary poppy, wasn’t there yesterday. #VEDay75 #respect

[cncmachinetools @machine_support]

Filmed 2 weeks ago, eventually edited the running in footage of the Puma 450 following X and Z axis refurb. Camera balanced on chuck a test to the smoothness of the slides #Productivity #MFG #ukmanufacturing #preventative #maintenance @machine_support #StaySafe

[cncmachinetools @machine_support]

#EarthHour

[cncmachinetools @machine_support]

could watch this over and over again there are patterns in everything we come across.

[cncmachinetools @machine_support]

Right that's the decorating out of the way, next task 👍

[cncmachinetools @machine_support]

Saddle refurbished, turcite replaced and slides ground. Time to get everything back on. Blue up the slides mmmmm #productive #UKmfg @machine_support keep manufacturing turning but most of all #staysafe

[cncmachinetools @machine_support]

#Guarding of manual machines just as important as full on CNC machines. Colchester lathe with #rollercover #guards and #chuck guard. #PUWER #mfg @machine_support

[cncmachinetools @machine_support]

Doosan Puma 450 complete axis strip down. Turcite coming loose, better to catch it early before further damage is done #preventative #maintenance #productivity #Manufacturing #ukmfg. further info contact [email protected] @machine_support

[cncmachinetools @machine_support]

#turret #alignment on a Puma 450 #lathe, both couplings out of position and require the dowels replacing. Turret disc fitted and geometries reset, back in production #productivity #machine_support #ukmfg
contact [email protected]