Maker Made

Providing innovative tools with the highest quality at affordable prices. Enabling the freedom and creativity of makers everywhere. Home of the M2

[Maker Made @MakerMadeCNC]

Stuck on setup? Calibration driving you nuts? Just want to hang with people who get why you bought a CNC?

Join us Thursdays at 1pm CT for our weekly maker hangout. Real troubleshooting. Real answers. Real community. No question too basic, no project too ambitious.

📷 Every Thursday | 1pm CT
📷 Meeting ID: 828 8289 7819

Bring your wins, your woes, and your weird build ideas. We'll bring the expertise and the bad jokes.
See you on Zoom! 📷

#MakerMade #CNCSupport #MakerCommunity #AskUsAnything

[Maker Made @MakerMadeCNC]

Looking for a CNC kit that doesn't take over your entire garage? The MakerMade M2 was built for exactly that problem.

The M2 is a wall-mounted CNC router kit with a full 4x8 ft cutting area on just an 18-inch deep footprint. Accuracy is under 1mm across the entire 32 sq ft work surface, with cutting speeds up to 40 in/min on hardwoods, plywood, MDF, plastics, foam, and thin sheet aluminum.

Rated 4.7 stars by the maker community — here's why it keeps earning that score:

→ Upright design saves floor space without sacrificing cut size
→ Free open-source MakerHub control software
→ Three 1/8" router bits, lead screw Z-axis, and dust collection port included
→ Works with DeWalt 611, Bosch Colt, and Makita RT0700CX routers
→ 1-year limited warranty + US-based support
→ Optional 2.8W laser module for engraving wood, plastics, even stainless steel

One of the most accessible DIY CNC kits on the market — whether you're building furniture, signs, or running a small shop.

Shop the M2 → https://t.co/lEeDNpLgr1

#MakerMade #CNCRouterKit #DIYCNC #M2

[Maker Made @MakerMadeCNC]

From raw material to stunning creation! 📷 See how the MakerMade M2 CNC brings your visions to life. Craft custom pieces with ease and precision.

Don't miss out – the M2 is now 20% OFF!

#MakerMade #BeforeAndAfter #CNCProjects #Craftsmanship #HomeWorkshop

[Maker Made @MakerMadeCNC]

@KingTunde_SZN @grok what number do you see in this image?

[Maker Made @MakerMadeCNC]

And if you wanna hang or need support. check our forum and reach support here: https://t.co/CC0JBHCOfS

[Maker Made @MakerMadeCNC]

"It's not you, it's me" -Facebook | FB may be down but we're still here with incredible tools to fill all of your newly found free time 😉

[Maker Made @MakerMadeCNC]

One of the questions that hits our inbox most is, “Does the kit contain a z-axis motor?”
The answer is YES!
Here’s a close up of the motor included in the kit.

Curious to see what’s all in the box that you’ll receive when you order? Check out this link! https://t.co/X713hPKy8q

[Maker Made @MakerMadeCNC]

A special look into our new maker shop! 🛠 All ready to create with our awesome makers. What does your maker space look like?

[Maker Made @MakerMadeCNC]

Jared, one of our highly creative makers, recently had a request for a custom mountain shelf to fit a rock collection of an impressive 50 rocks! Read about Jared’s project here: https://t.co/Fy8YyWCrPF

[Maker Made @MakerMadeCNC]

One of our creative makers recently made a project that even @NASA would be proud of! Really loving your attention to detail, Conor 💫 Thanks for sharing your project!

[Maker Made @MakerMadeCNC]

@darklordflufffy Awesome to hear!

[Maker Made @MakerMadeCNC]

Today on our blog we’re sharing a killer CNC project made by one of our awesome makers, John! See how John made this Punisher logo in under 45 minutes by clicking here: https://t.co/bstDFfkDv0

[Maker Made @MakerMadeCNC]

@Xp9091 Hi there! Our email is [email protected]. Feel free to email us all of your questions. Thanks!

[Maker Made @MakerMadeCNC]

What project are you working on this week? ⚙️

https://t.co/sBm5wOf12I

[Maker Made @MakerMadeCNC]

What project currently has your attention, or which one have you just finished?

[Maker Made @MakerMadeCNC]

One of our most frequently asked questions is which router we recommend you use with your Maslow CNC. Our answer: the Ridgid R22002 from @RIDGIDPower for our domestic makers. For international customers, we’ve heard success stories with @BoschToolsNA routers. ⚙️
#cncowners

[Maker Made @MakerMadeCNC]

“Hi Maker Made group! Here's my first Maker Made project. It's a cutting board design or can be scaled up to make a great sign for a cabin or entryway. It needs a little work on my end, but this machine is quality and produces great products!” - Stephen B.

Thanks for sharing!

[Maker Made @MakerMadeCNC]

“We were stars of the show this past Halloween when we created a fire truck for our for our son and daughter to ride in.” - Grant S. 🚒 // Stay tuned for more projects from Grant and his wife, including another big project for Halloween 2019! #cncowners #woodworking

[Maker Made @MakerMadeCNC]

Tap ▶️ to see our Maslow CNC in action! 💯