María Peñas

working at @3d_maranon

[FabLab 3D Hospital Marañón @3d_maranon]

This 3D model simulates a trimaleolar fracture in the left ankle. It was printed with PLA material and will be used for planification. #3DCOT #HospitalMarañon3D #HospitalGregorioMarañon

[FabLab 3D Hospital Marañón @3d_maranon]

3D printed model of a hemipelvis with bone deficiency used for planification and as a starting point for the creation of a hip implant.

[FabLab 3D Hospital Marañón @3d_maranon]

3D-printed model used as a template for treating a patient suffering from a suprasindesmal fracture (ankle fracture) above the syndesmosis level on the right foot which joins the ankle to the tibia and fibula leg bones.

[María Peñas @mariabiomedical]

@technomoas Imposible! Te lo escribo por aquí no problem😊 email: [email protected]

[María Peñas @mariabiomedical]

@technomoas Me pone que no puedo mandar mensajes a tu cuenta 😅

[FabLab 3D Hospital Marañón @3d_maranon]

3D model created for planification of a reconstruction of an orbital fracture which occurs when one or more bones around the eyeball break.

[FabLab 3D Hospital Marañón @3d_maranon]

3 years old patient with an abnormality on his heart, having the left appendage much bigger than usual. In the surgery, the excess of blood that the appendage has will be removed and afterwards the empty appendage will be cut. 3D model created for surgical planification.

[FabLab 3D Hospital Marañón @3d_maranon]

3D model of an orbit section printed as a mirror of the healthy side of the patient. This model will be the guide to mold the plates that will be used in the surgery to correct the fractures. #HospitalMarañon3D FabLab team: @rupermac @calvoharo_ja @diegotrap @sandrasv97 @kn_ord

[FabLab 3D Hospital Marañón @3d_maranon]

3D model of a spine from C3 to Th1 of a patient that sufferd a compression fracture in the C7 and a posterior fracture in the C6. This model allows a more accurate evaluation of the lession. #HospitalMarañon3D FabLab team: @rupermac @calvoharo_ja @diegotrap @sandrasv97 @kn_ord

[FabLab 3D Hospital Marañón @3d_maranon]

This 3D model shows a fracture of the distal end of a tibia. This case will increase the repository of medical cases in the Hospital Gregorio Marañón.
#HospitalMarañon3D FabLab team: @rupermac @calvoharo_ja @diegotrap @sandrasv97 @kn_ord

[FabLab 3D Hospital Marañón @3d_maranon]

3D printed model representing a multifracturated tibial diaphysis. It was printed as soon as possible to anticipate the surgery date so the surgeon could have an anatomic model of the patient. #HospitalMarañon3D FabLab team: @rupermac @calvoharo_ja @diegotrap @kn_ord @sandrasv97

[FabLab 3D Hospital Marañón @3d_maranon]

3D Model in EP of a complex fracture in the pelvis. This particular case will increase the repository of medical cases in the Hospital Gregorio Marañón. #HospitalMarañon3D FabLab team: @rupermac @calvoharo_ja @diegotrap @kn_ord @sandrasv97

[FabLab 3D Hospital Marañón @3d_maranon]

3D Model of an abdominal aorta section of a patient that required an angioplasty. This model was made to allow the surgeon to precisely cut the stent. The surgeon was @javispacem #HospitalMarañon3D FabLab team: @rupermac @calvoharo_ja @diegotrap @kn_ord @sandrasv97

[FabLab 3D Hospital Marañón @3d_maranon]

3D model printed in two colors representing the Dandy-Walker syndrome which is a group of congenital human brain malformations. @jdeleonluis will use this model to give a seminar for residents at HGUGM. FabLab team @rupermac @calvoharo_ja @diegotrap @kn_ord @sandrasv97

[Sandra Sánchez @sandrasv97]

Splints for orthognathic surgery manufactured in house at #HospitalMarañon3D to compare them with an external solution. This splints will help @pmontesfm to positionate the jaw during surgery. FabLab team @3d_maranon @rupermac @calvoharo_ja @diegotrap @kn_ord @sandrasv97

[Sandra Sánchez @sandrasv97]

3D printed models representing fractures in scapula and pelvis from a patient that suffered from a complex polytrauma. This proyect was carried out by the #HospitalMarañon3D FabLab team @3d_maranon @rupermac @calvoharo_ja @diegotrap @kn_ord @sandrasv97

[Sandra Sánchez @sandrasv97]

3D printed model representing half of the cranium of a patient that had an inverted papiloma in the right nasal cavity. This model will help the reconstruction of the nasal cavity with a prosthesis. The case was proposed by Dr. Pablo Montes.

[Karina Ordóñez @kn_ord]

3D-printed model of the left-side thorax with the heart, aorta and the internal thoracic artery (ITA). This patient needs a coronary artery bypass (CABG). In this case, the vessel to be taken for the bypass will be the ITA.

[Sandra Sánchez @sandrasv97]

3D educational model printed in two colors. Designed from scratch by Dr León. This proyect was carried out by the FabLab team at HGUGM @3d_maranon @rupermac @CalvoHaro @diegotrap @kn_ord @sandrasv97