Mark Gordon

Former active duty U.S. Marine, President of Short Action Customs, LLC

[Mark Gordon @markatSAC]

I have been using Ray for years and have been happy with his knowledge and services.

[Mark Gordon @markatSAC]

@ANitrous87 Sorry about the delay. We have a 7/300 PRC and 300 PRC reamer being made as we speak. We will be doing them shortly.

[Mark Gordon @markatSAC]

It is hard to beat how smooth a Nitrided action and bolt feel. At Short Action Customs when you get your action and bolt Nitrided, we tape off the bolt body and action raceway. This keeps… https://t.co/ZFg7Phfn6m

[Mark Gordon @markatSAC]

It’s only a matter of time before you have a “whoops” with a work offset. This was a super nice @harveytool @HelicalSolution helical .500” diameter carbide chamfer mill. Got buried about… https://t.co/NT1xIfdvtd

[Mark Gordon @markatSAC]

Good night Haas. I have 46.5 hours in this week. I’m going to bed but you keep working! Very grateful for the G65 P9613 tool breakage/tolerance check after each tool change in case… https://t.co/T0cdjOL5dZ

[Mark Gordon @markatSAC]

If you’re one of those “wrong handed” @DeserttechHQ shooters who loves the 223 Remington cartridge.....we have news for you! Left handed 223/300 parts are rolling off the machine as we… https://t.co/js8eRyAO3n

[Mark Gordon @markatSAC]

Quick video on our Desert Tech Short Magnum parts kits. These parts along with some quick and basic modifications make a world of a difference in getting the short magnums to feed! Stay… https://t.co/X64nRzj9J5

[Mark Gordon @markatSAC]

If you’re a fan of @DeserttechHQ , we have some exciting upgrades available shortly. This magazine kit solves the mid-length magazine problem. The feed lips are adjusted properly in a… https://t.co/QwRBZMfCf4

[Mark Gordon @markatSAC]

Some Diamond Barrel fluting for your enjoyment on this Wednesday afternoon. Short Action Customs currently offers Spiral, Straight and Diamond Barrel fluting in house. #shortactioncustoms… https://t.co/2SeABjUbGp

[Mark Gordon @markatSAC]

Working these long days and late nights keeps me from seeing the sun. Cold weather is creeping up, fresh coat of frost on the Diamondback truck cover. #shortactioncustoms… https://t.co/yUpSBMCfQ6

[Mark Gordon @markatSAC]

223/300 blackout bolt heads and barrel extensions....yes sir! Starting on Left handed kits tomorrow. #shortactioncustoms #223conversion #deserttech @ Short Action Customs, LLC https://t.co/YhRo9j58bO

[Mark Gordon @markatSAC]

Who is ready for some Short Action Customs 223 bolt heads and barrel extensions!!!! #shortactioncustoms #deserttech #solidworks #autodesk @hsmworks #custombarrels @ Short Action Customs, LLC https://t.co/vp370O9Qsh

[Mark Gordon @markatSAC]

223 Rem conversion kits parts are being run right now at Short Action Customs. I must say they are beautiful!!!! Will have the left handed parts made on Monday and then off to heat treat!!… https://t.co/93OhHtHFZd

[Mark Gordon @markatSAC]

Quick picture of our new fixture to make the the@Shortactioncustoms 223 Rem conversion parts. One thing that was important to me was to ensure the threads and face detail of the barrel… https://t.co/JkxPdjqcne

[Mark Gordon @markatSAC]

Starting production of our 223 Rem conversion kits for the @DeserttechHQ SRS rifle system this week. Just got done test firing the prototypes made recently and they shot and functioned… https://t.co/iv1vvalHuD

[Mark Gordon @markatSAC]

Pencil barrelcontour, 1.130”, 1.160” and 1.350” bushings now available for the @markatSAC Modular Barrel Vise. Contact us for custom sizes. #shortactioncustoms #modularbarrelvise @ Short… https://t.co/W2T8KhMUF1

[Mark Gordon @markatSAC]

Bought a cleaning fan from @langtechnik to clean up the chips and coolant at the end of the program so I don’t have to sit there for a few minutes trying to clean up the work area. I must… https://t.co/cmOeHI97Dv

[Mark Gordon @markatSAC]

New fixture all loaded up and making parts. Holds 24 of our threaded hinge pins and 8 ARCA clamp bars. Lang pallet system has been working out great!!! #shortactioncustoms #langtechnik… https://t.co/8CXq3CuvOF

[Mark Gordon @markatSAC]

Echo our German Shepherd shop dog just can’t handle the extra long work days here at the shop. I must say I am jealous!! Lol. #shortactioncustoms #shopdog #getmanshepherd #gsd #latenight… https://t.co/B3dBfp51r6

[Mark Gordon @markatSAC]

First 4th axis fixture that we have made. So far working out great and increasing productivity! #shortactioncustoms #langworkholding #langtechnik #miteebite #haasautomation… https://t.co/Ar35JR3xGj