@VinnieiOS Turbo Pascal and Turbo C at my high school. Later I learned Assembly x86 and MCS51 microcontroller.
when WWW boom made me learn HTML Javascript CSS and PHP. For the daily basis I used C until I got into Apple developer academy, that's when I met Swift.
My JBL110BT's cable are tearing apart, so I modified it into 3.5mm audio jack and printed a case. The result is quite nice and it sounds really similar when I use JBL 110 earphone.
@GregDavill What is your laptop model? Been thinking to do the sampe on my 4GB soldered RAM Asus ultrabook UX305F, but haven’t found the schematic yet. I believe there has to be some resistor to be (de)soldered for telling BIOS
57044 bytes. Maximum code size for Bluepill stm32f103c8t6. Compiled using Arduino, original stm32 HAL library, generic_boot20_pc13.bin bootloader (21140bytes).
I cannot compile further although there is only used 87%.
Any comments are welcome🙏
@uint8_t @jasonopdx @tachiniererin That’s true. Vehicle battery is 12V (off) 13.7V (standby rpm), but don’t forget the spikes. I had experienced blown components that are rated at max 15V. Problem solved when I substitute with rated max 30V. Happened on tens-twenties vehicle that I installed.
Top left: first 3d print without proper bed leveling and without material selection on cura.
Top right: after proper bed leveling and correct material selection esun pla+ black.
3D Printed using anycubic i3… https://t.co/Pu30ya0myl
Finally able getting new display working alongside with LittlevGL GUI library. Using this GUI library really ease a lot of building interface for a lot of projects. ps: battery indicator is working in real time too. https://t.co/O5bnAPMkc3
Air suspension controller. Receive pressure sensor from four wheels and main tank. And activating solenoid valves based on sensor data and user set point.
Some people are having doubt that this is hand soldered… https://t.co/ZTK5EQsPHm