Mechanical Engineering Society, BIT Sindri

Mechanical Engineering Society shall work towards the development of the department and shall keep the flag of the department fluttering high.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

partial rollover for it to realign the vehicle in case of incidents making it possible to stay intact most of the time in collisions.

#mesbitsindri

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

#AAKRITI’22

PARTICIPANT NAME – Kumar Priyam
BRANCH- Mechanical Engineering
INSTITUTE – BIT Sindri
PROBLEM STATEMENT- 03

As the use of daily commuters increases on a daily basis due to growing population and urbanization, the safety of the passengers has become the paramount

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

with considerable speeds without the danger of overturning. With ingress and egress positions kept low too, the center of mass of passenger and vehicle combined is even lowered than conventional designs. The increment in aspect ratio provides enough surface contact in case of

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

The drone is equipped with a night vision camera which can be used for monitoring borders and with a missile that can be used during combat. The drone also can endure up to 24 hours of continuous flight.
#mesbitsindri #aakriti

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

#AAKRITI’22

PARTICIPANTS NAME - Divyadarshi
BRANCH- Mechanical Engineering
INSTITUTE – BIT SINDRI
PROBLEM STATEMENT- 05

Here, I tried to design an autonomous strike-capable drone that has computer vision capabilities that enable it for tracking and detect enemy intrusion.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

it becomes difficult to use. This attachment will be made using ABS plastic and stainless-steel pipes, so that it is lighter, easy to manufacture and affordable for everyone.

#mesbitsindri

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

#AAKRITI’22

PARTICIPANT NAME – Umesh Kumar Gola
BRANCH- Mechanical Engineering
INSTITUTE – J.C. Bose University of Science and Technology YMCA
PROBLEM STATEMENT- 09

BICYCLE ACCESSORY
The world around us is becoming smart, how can a bicycle be left behind. So here we present

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

basic analytical feature, basic analytical feature, basic environment monitoring features, healthcare features, accessibility, etc. The dimensions of the attachment are decided considering it does not make cycle bulky loosening its maneuverability, or not so small such that

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

Diverterless Supersonic Intake which has been developed in India. It is intended to have an internal carriage of 1500kgs of payload and 5500kgs of external payload with 6500kgs of internal fuel.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

#AAKRITI
PARTICIPANTS NAME – Abhijeet Kumar
BRANCH- Mechanical Engineering
INSTITUTE – BIT SINDRI
PROBLEM STATEMENT- 05
I have designed AMCA fighter aircraft. The Advanced Medium Combat Aircraft (AMCA) is an Indian program to develop the first made-in-India fifth-generation

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

aircraft manufacturing by Hindustan Aeronautics Limited(HAL). The first flight is expected to be by 2024-25. AMCA will be capable to upgrade to 6th-generation technologies.
The AMCA is envisaged as a 25-tonne twin engine stealth aircraft with internal weapons bay and

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

live and work.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

PARTICIPANTS NAME – Abhisek kumar singh
BRANCH- Mechanical Engineering
INSTITUTE – BIT SINDRI
PROBLEM STATEMENT- 05
With the vision of Atmanirbhar Bharat, this Space Station would make it possible to do research works and experiments that would provide a better understanding

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

of the cosmos. This would also allow astronauts to stay in space.
The components of the Space Station include shapes like canisters, spheres, triangles, beams, and wide, flat panels. The modules are shaped like canisters and spheres. These are areas where the astronauts would

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

Lifting logic is driven by the top motorised mechanism, while the vehicle is propelled by motors at the bottom. For the purpose of demonstrating miniaturisation, the vehicle frame and pulley frame are created to support the most weight possible in a compact structure.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

Pulley Based Movable Crane Robot

Here, Engineers present a motorised pulley-based crane robot design and its construction. The system comprises of a pulley mechanism with a shaft used to handle the rope attached to a moveable frame chassis.

To retain the pulley shaft in a

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

45-degree angular position for lifting, it is installed in a frame. Additionally, our technology uses motors that are positioned at the bottom of the vehicle to move it in the appropriate direction. It also includes a different motor that powers the rope pulley system.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

their past and present college experiences.

We also hope that the strong alumni network we have will help our institution succeed now and in the future. With this Mechanical Engineering Society, BIT Sindri sends its best wishes to all its former students.

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

Nobody is bothered about an institution more than its alumni. - N.R.Narayana Murthy

Having our alumni at this BITSAA alumni meet is a pleasure. Regardless of one's perspective, one will always be interested in what goes on in those institutions.

It was a joy to speak with all

[Mechanical Engineering Society, BIT Sindri @mes_bitsindri]

our accomplished former students who have succeeded in their respective fields. After the events were successfully concluded, they went to the departments and labs and shared their experiences. Afterward, they went to the hostels, where they talked to the students and recounted