Tesla cut the Model Y rear Gigacasting’s processing time from 120 seconds to 68 seconds at Giga Berlin 💡
The figure reported by Berlin staff in April 2026 is a reduction of 52 seconds per cycle.
For a high-volume casting, that changes how much work the same production cell can handle. But a shorter cycle only helps if the casting still meets dimensional and mechanical requirements.
Conformal cooling targets the hot spots inside the die. Cooling channels follow the geometry more closely, extracting heat where it is needed so the casting can solidify and leave the die sooner.
The process refinements also improved the casting’s microstructure and mechanical properties.
The Model Y Juniper rear casting weighs approximately 60 kg, down from 67 kg on the previous generation.
Those gains come from work on the part and the process together: die cooling, injection control, and runner and gate designs refined since 2020.
Buying the same size machine does not buy the same production result.
A faster cycle means the press is used more, but the more rapid thermal cycling can shorten die life, bringing more frequent insert changes and maintenance stops.
For a foundry quoting a structural casting, cycle time determines how much capacity the job consumes.
Mastering parameters and tooling can change the economics of the programme without increasing the number of machines, as long as the extra die wear is counted in the cost.
🎞️: Tesla
Simon Zwahlen, Managing Director Central Europe bei Tesla, hat sich bei der Auto Zürich mit dem Schweizer Bundesrat, Alber Rösti getroffen. Ich hoffe das öffnet nun die Tore für eine tolle Zusammenarbeit zwischen Tesla und der Schweizer Politik, sowie einer baldigen Zulassung von TAD (Tesla Assisted Driving) in der Schweiz. Danke Simon und danke Bundesrat Rösti 👏🏻🇨🇭⚡️🤖
Fotos: Simon Zwahlen auf LinkedIn
Warum kann der Zext nicht „Neuseeland“ enthalten? Ich muss die Mikroschrift im Bild entziffern, um zu lernen, um welches Land es sich handelt.
Je häufiger und je aufwändiger dieses Herausfinden ist, desto eher überspringe ich Artikel der NZZ, ohne mir diese Mühe zu machen - schade für Beide.
@NZZ Warum müsst ihr immer Elon nehmen (als „Symbolbild“) da gibt es Leute im besagten Umfeld die zwiespältige Dinge tun/taten!
-> clickbait auf Kosten Dritter, das stört mich und ist der NZZ unwürdig!
@Chamberlain_Grp the regular login request for the AppleWatch is a very big pain!
You walk up to the garage and want to open it on the AppleWatch, but no firstly Find iPhone and do another useless login!
Lost a lot of trust in your solution!
Ok, ich habe jetzt den Artikel von Eichenberger gelesen - in der Zeitung und habe den Eindruck, dass keiner Der Kommentatoren den Artikel gelesen hat.
Dies zeigt mMn, dass die Präsentation (automatisch generiert, vermute ich) des Artikels hier auf X der Auslöser des Falsch-Verstehens ist.
Die Präsenz der NZZ auf X würde etwas Liebe und Aufmerksamkeit gut tun!
Tesla just took the top two spots in Europe's entire car market
September 2026:
#1 Tesla Model Y: 40,971
#2 Tesla Model 3: 25,057
#3 Volkswagen Golf: 18,088
The two best-selling cars across every brand and every fuel type were Teslas
Tesla recorded 66,035 registrations in total for the month, representing around 98% of the market
@NZZ Der Tag an dem ich auch das normale NZZ Abo kündige, rückt immer näher, solange diese Art von Berichterstattung weitergeht.
Am Samstag, in der Rubrik Mobilität, melden sie garantiert, dass VW ein neues Modell ankündigt, das fahren kann!
Hier ist ein gutes Beispiel warum es nicht immer gut ist exakt dem Geschwindigkeitslimit zu folgen. Der Tesla fährt mit FSD supervised mit 5km/h durch die Schranke und beschleunigt erst ab dem 30er Schild und wird vorher riskant überholt.
Zwar korrekt, aber absolut praxisfern, provoziert Überholmanöver und wird als Folge weniger genutzt, was die Sicherheit reduziert.
Genau das macht die US Version von FSDs besser!
@robotinreallife@BMV
Als Abonnent der NZZ finde ich die nichtssagenden „viele im Westen“ und es sind keine Einwanderer, sondern Personen die unter dem Titel Asylrecht in die CH kommen, sehr befremdlich. das Thema Asylrecht gäbe genügend Artikel, die mit Fakten mögliche Chancen und Risiken für die CH ansprechen könnte.
Das Faseln über KI und Einwanderung entfremdet mich, als jahzentelnger Abonnent der NZZ, immer mehr! Diverse jüngere Journalisten können sich hier ausleben und ihre Weltanschauung verbreiten.
This is exactly why Europe’s 10% FSD speed-offset limit is a mistake.
Here the car thinks the limit is 60 km/h, but it’s actually 80. With a 10% cap, FSD would be stuck at 66 km/h, forcing me to override or disengage and drive manually.
So what happens? People get frustrated, override it, disengage FSD and drive manually instead.
And this isn’t rare. Wrong speed-limit data exists all over Europe. More forced disengagements, more manual driving, more unnecessary overrides.
How exactly is that safer?😕
If I’m supervising at all times and I’m still legally responsible, let me choose the maximum speed myself. Don’t cripple the already proven safe system because the map data is wrong.