@keithwhor Completely valid to verify the new tests actually catch the bug without the fix implemented. It would verify that and then re-apply its changes once the tests fail in the expected manner. Actually good software engineering practice.
Finally joined the ranks of "Balkonkraftwerk" owners with my own 2 kWp solar setup: https://t.co/GudOo8SCT1. Feels good to produce my own power. In the future, upgrade with enough output to charge the EV for free as well.
@wholemars On "hacked" cars it ran quite nicely in a few European countries. But legally, you're right - v12 wasn't properly trained on non-US data, and tried to do all sorts of US-only things, like turning right on red, which is _very_ illegal here.
@KilowattStation@brandenflasch The "Charging information" sign is also all over the place - random numbers, some info left and some right, all mixed up. I'd go as far as to say the sign layouts are AI-generated and not reviewed by anyone with some design sense.
@stefan_3d @eivissacopter So ist es, eigene 16A Sicherung nur für die eine Dose, und die Zuleitung vom Verteilerkasten sind auch nur wenige Meter. Ich habe den UMC da auf 12A eingestellt, alle Stecker kalt, soweit keine Anzeichen für irgendwelche Probleme.
@eivissacopter @stefan_3d Habe im neuen Haus einen Trocknerauslass durch die Wand aus dem Keller vorgefunden, genau wo das Auto davor steht. Ladeziegel in den Keller, Stecker in die extra für den ehemaligen Trockner gesicherte Steckdose, Kabel durch den Auslass raus, Verkleidung drauf - top!
@ReolinkTech Amazing cameras and great app! Any chance of looking into landscape orientation on the iPad though? It works in general, but a lot of the app is broken - either forced into windowed mode or partially off-screen. Using iPadOS 26 on an 11“ iPad Pro M4.
@CNC_Kitchen Looks great! This is one thing that AI-assisted coding really allows: custom software for singular users, that would never have existed otherwise. It probably isn't "production grade" for public use straight from the LLM, but in many cases it never needs to be.
@NotATeslaApp I think I found another undocumented change in the Christmas software: the weather radar map now automatically orients to north-up when opened. It used to remain in the nav orientation before (so stayed forward-up when so selected, and was somewhat confusing).
@CNC_Kitchen@Telekom_hilft Ich habe mich nach etwas Recherche beim neuen Haus für @congstar entschieden, gegen @Starlink, als Zwischenlösung bis Glasfaser liegt. Mal schauen ob ich das revidieren muss, wenn auch so was kommt 🤔
@eivissacopter@BlogTeslaFr Back in early EU M3P times (2019) it was rather random what it said in the CoC. Some cars had all wheel sizes (18-20"), and some only had 20" in there, with no visible logic to it.
@BambulabGlobal New house needs a new network cabinet. I was thinking of a custom setup, with 10“ rails and custom holders for desktop-format router hardware, PSUs and other pieces. Would be a nice challenge to print in as few pieces as possible, and use the H2S build volume well!
🎁 H2S Giveaway 1/3
Dream big. Make bigger. 💚
We’re kicking off the first of three H2S giveaways — and one lucky maker will take home an H2S Combo.
How to enter:
1️⃣ Like this post
2️⃣ Follow @BambulabGlobal
3️⃣ Repost/Share
4️⃣ Comment below: What’s the first large-scale project you’d make with the H2S?
📅 Winner announced Sept 3rd.
#Bambulab #BambuH2S #h2s #YourPersonalManufacturingHub #3dprinting
SCD40/SCD41 CO2 sensor with an ESP32-C3-SuperMini is awesome! Really compact combo for a room sensor for smart home. I made an enclosure for it, take a look and print one for yourself: https://t.co/viFd5LsF0R #3dprint#esphome#esp32
@BambulabGlobal Will the AMS 2 Pro work in a daisy chain with an "old" AMS v1 on a P1S? And will the drying functionality work in a setup like that? (I know I will need the external power brick, and the April firmware update for drying)