Oliver_Whatsminer

Share whatsminer operation and maintenance tutorials, etc.

[Oliver_Whatsminer @oliver0329]

Airtoliquid 1.5.7
Add support M61 miner

https://t.co/NUzeLSqQG2

[Oliver_Whatsminer @oliver0329]

Add new repair firmware, it can support new miners to repair

https://t.co/8ieHNVggSp

[Oliver_Whatsminer @oliver0329]

New AirToLiquid 1.5.6
Support liquid to air cooling

https://t.co/idgKkn281o

[Oliver_Whatsminer @oliver0329]

New AirToLiquid Tool 1.5.4
Support some new machine firmware to switch liquid cooling mode
https://t.co/5qHZMlVOeo

[Oliver_Whatsminer @oliver0329]

@hutter510 you can contact my telegram.https://t.co/Ee7hMCStGF

[Oliver_Whatsminer @oliver0329]

New factory test firmware of H616 control board
https://t.co/xxjAUI402K

[Oliver_Whatsminer @oliver0329]

@tester5ku You need to upgrade to the 2024 firmware version before you can use the 1.5.2 tool for operation.

[Oliver_Whatsminer @oliver0329]

New AirToLiquid Tool 1.5.2
Support some new machine firmware to switch liquid cooling mode

https://t.co/D6eGRkDLHx

[Oliver_Whatsminer @oliver0329]

@Mehdi45Z I can't send you a message via TG

[Oliver_Whatsminer @oliver0329]

New airtoliquid tool 1.4.7
https://t.co/xxbrk97LRt

[Oliver_Whatsminer @oliver0329]

The airtoliquid tool currently does not support firmware upgrades for new machines. We are updating the server firmware version to support it. Please wait patiently for the update to be completed.

[Oliver_Whatsminer @oliver0329]

I have updated two new repair test firmware, can be obtained through the link.😄

https://t.co/O7yXWRx9bG

[Oliver_Whatsminer @oliver0329]

@carlitosgomezz2 When the server fails, it will be suspended for a period of time and wait patiently.

[Oliver_Whatsminer @oliver0329]

@carlitosgomezz2 Server exception, waiting for server to recover

[Oliver_Whatsminer @oliver0329]

@MS52334267 Please swap slot0 and slot2 hash board, then check whether error code changes. If a 542 error code happens, that hash board fails, needs repair.

[Oliver_Whatsminer @oliver0329]

@carlitosgomezz2 Some P21 do not support turning off the power supply fan

[Oliver_Whatsminer @oliver0329]

@Ffederick12 Show me the screenshot of the prompt.

[Oliver_Whatsminer @oliver0329]

@Benjami55453544 The supply voltage should be 230-240v.

[Oliver_Whatsminer @oliver0329]

@giovanakism You need to provide me with a log for analysis so that I can give you good advice.
You can contact my telegram.
https://t.co/Ee7hMCStGF

[Oliver_Whatsminer @oliver0329]

@giovanakism Reduce the temperature of the running environment of the machine and maintain good heat dissipation

[Oliver_Whatsminer @oliver0329]

@giovanakism https://t.co/8ieHNVgOHX
You can try again

[Oliver_Whatsminer @oliver0329]

Update two new factory test firmware version.
Only to repair hash board.

https://t.co/jKXLbr1bUX