OPTIMUM Platform

OPTIMUM aims to support #innovative concepts for #engineering , #commissioning , control and supervision of #SmartManufacturing and #MaterialHandling

[OPTIMUM Platform @optimumplatform]

In the last 1.5 years we had to renounce most of the presence workshops within our consortium. We were therefore very pleased to welcome part of the consortium back to our #Demag Research Factory from 18 - 19 August.

#Optimum #research

[OPTIMUM Platform @optimumplatform]

Within this workshop, the routine for #CAN-Bus-Initialisation was improved, the localisation tag was reflashed and then reattached centrally between the two driven wheels of the AGV.

For more: https://t.co/ihsfWbAqB6

#industry40 #jointTechnologies #IoT #DEMAG #COMNOVO

[OPTIMUM Platform @optimumplatform]

In this workshop position data in 3D visualization was corrected by using different factors and offsets, which enabled an adjustment through a simple multiplication with the already available position data.

For more: https://t.co/P55kH14Bnh

#industry40 #jointTechnologies #IoT

[OPTIMUM Platform @optimumplatform]

Thanks to the great effort of the entire team, all sources of error were eliminated in the end of this project and the digital twin of the #AGV was successfully displayed.

For more: https://t.co/jizNH5gEWK

#industry40 #jointTechnologies #IoT #taraVRcontrol #digitaltwin

[OPTIMUM Platform @optimumplatform]

After 3 years of intensive #research and #technology development there is much to tell about technical #innovations and ground breaking prototypical implementations.

For more: https://t.co/sq3V4bHNDL

#iot #future #innovation #internetofthings #project #retrospective

[OPTIMUM Platform @optimumplatform]

The Turkish demonstrator #ERMETAL used innovative functions from OPTIMUM for a safer and more efficient #coil transport as well an intelligent #warehouse #management.

For the visualization: https://t.co/FlDtwVg3DY

#iot #future #innovation #internetofthings #project

[OPTIMUM Platform @optimumplatform]

The Spanish demonstrator at #MAGTEL actively interacts with the operator using a #robotic arm, #cameras and #projectors.

Explore this inspiring project: https://t.co/zqCu3sIb0K

#iot #future #innovation #internetofthings #project #MAGTEL

[OPTIMUM Platform @optimumplatform]

The Korean demonstrator at #ETRI illustrates innovative #assisstancefunctions in two different scenarios.

Find out more about the scenarios: https://t.co/2nqIZpOsXQ

#iot #future #innovation #internetofthings #project

[OPTIMUM Platform @optimumplatform]

The DEMAG Research Factory with the implemented demo assembly process is shown in the following #3D animation with the simulation tool #TaraVRbuilder developed by #Tarakos:

For the animation: https://t.co/CCqTO5pNtM

#iot #future #innovation #internetofthings #project #demag

[OPTIMUM Platform @optimumplatform]

OPTIMUM, a joint collaboration across 6 countries, is a research project in which it was managed to #prototype technologies in 15 demonstrators in South Korea, Spain, Turkey and Germany.

For more: https://t.co/wNJwW7dv7b

#industry40 #jointTechnologies #IoT #prototyping

[OPTIMUM Platform @optimumplatform]

Industry4.0 triggers a lot of challenges being the breeding ground of OPTIMUM project. Efficiency of processes and an optimum outcome are the pre-requisite for #smart factories in future.

For more: https://t.co/m8oeqKcrGz

#iot #future #innovation #internetofthings #project

[Beia Consult Int @beiaconsult]

Final review for our project @optimumplatform. Congratulations to all the partners! 🥳 @beiaconsult @ITEA_3

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSs9IB | Busy month: October 2018 – The Consortium meets in Leipzig to discuss sequencing diagrams – hosted by #ERSTE
#OptimumPlatform #research #automation #iot #iiot #future #smartfactory #industrie40 #industry #Smartfactory

Read More: https://t.co/ZTbaZegerE

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSs9IB | Busy month: On 22nd and 23rd October 2018, the majority parts of the Project Coordination Committee (#PCC) met at Carlos III University in Madrid (#UC3M).
#OptimumPlatform #manufacturing #innovation #software #ITEA_3

Read More: https://t.co/zVLa0CMxwU

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSs9IB | The project meeting of the #OPTIMUM consortium took place on 29 and 30 January at Linde MH's headquarters in Aschaffenburg.
#softwareengineering #iot #iiot #Smartfactory #industrie40 #industry #tech #business #ITEA_3

Read More: https://t.co/jXH4b1GhX5

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSs9IB | Very exciting March 2019 – First #ITEA3 Review in Hamburg hosted by #NXP and #DEMAG
#OptimumPlatform #innovation #Management #digitalmarketing #technology #manufacturing #innovation #manufacture #software #automation

Read More: https://t.co/sx5z4jFC1v

[OPTIMUM Platform @optimumplatform]

https://t.co/mghjXwkMfp | Partners came together on 10th of October 2018 to start drawing Message Sequence Charts(#MSC) for several use cases and to share introductory information on DOME...
#OptimumPlatform #ITEA3 #M2M #research #project #tech

Read More: https://t.co/UkrtWsrxpu

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSs9IB | From 9th to 11th of April 2019 most of the project-consortium working on the publicly funded Research Project #OPTIMUM enjoyed being at #KONECRANES in Hyvinkää, Finland.
#automation #innovation #ITEA_3 #technology

Read More: https://t.co/ziMNitPBJ6

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSs9IB | Successful start of the #DEMAG on May 2019: In the anniversary year of the company's foundation, another milestone in the history of #innovation is reached at the Wetter site.
#OptimumPlatform #tech #automation #ITEA

Read More: https://t.co/auESJVAnKO

[OPTIMUM Platform @optimumplatform]

https://t.co/dsy2TSJKA9 | As part of its 200year anniversary celebrations, #DEMAG hosted a Customer Day and an Open Day. These two events were utilized to present...
#OptimumPlatform #ITEA_3 #automation #Research #development #networking

Read More: https://t.co/TqWRhgw9Py