Orbex Space

European Orbital Space Launch Services

[Orbex Space @orbexspace]

Our Journey to Launch formally came to an end yesterday (18 February 2026).

It’s not the conclusion we hoped for, but we remain incredibly proud of everything we accomplished together at Orbex - the milestones we reached, the challenges we overcame, and the ambition we poured into every step of this journey.

The talented Orbex Team will now take their expertise and passion into new roles and adventures. We couldn’t be prouder of each and every person who contributed to this chapter – Orbex and Prime will forever be part of the UK Space Story. The Team’s work, dedication, and spirit are the legacy of Orbex.

To ensure that Orbex and Prime are never forgotten, we are delighted to share that Baby Orbex Prime has found a new home at Morayvia Aviation Museum in Kinloss, where it will be on display from 28 March 2026. We hope you’ll visit and support this fantastic charity.

We have also donated Engine Chambers to the @sciencemuseum in London and the National Museum of Scotland and another Baby Orbex Prime will be heading to the Aberdeen Science Centre.

Thank you to all the organisations for their support and interest in continuing to tell our story.

And finally, because your favourite posts have always been technical video updates (second only to anything involving the team and food 🍦🚚 ), we wanted to share a final episode of our Journey to Launch series with you - covering some of our best bits:

https://t.co/a3jmQE184z

Thank you for being part of our amazing journey!

Ad Astra….🚀

#JourneytoLaunch #PeopleBehindPrime #OrbexAlumni #TopLaunchTeam #LaunchUK #EuropeanLaunch #SpaceIsHard

[Orbex Space @orbexspace]

We are proud to share a photo of our fully assembled Payload and Avionics Module (PAM), which was being prepared for final stage tests and first flight. Again, this demonstrates the progress we had made towards our first launch.

The Payload and Avionics Module is the structural element that houses the Avionics and Guidance, Navigation and Control (GNC) modules and harnesses required for Stage-2 of the Prime Launch Vehicle, including the RF antennas used for communication.

The structure is made of carbon composite and is extremely light weight. It serves as the interface between the Stage-2 tank, the Payload Fairing and houses the separation mechanisms. The Payload deck, which is a honeycomb sandwich construction on top of the PAM serves as the platform for the payloads to be launched.

The PAM features a dense-packaging of Avionics and includes thermal management to ensure acceptable operating conditions for the modules, which are mounted onto the PAM. The modules are mounted on the interior surface of the PAM with aerothermal protection for the antennas being provided by cork patches located on the exterior.

#PAM #OrbexTech #SpaceInnovation

[Orbex Space @orbexspace]

Today we released new, unseen photographs of the microlauncher, Orbex Prime.

With the company on the cusp of entering administration, we have chosen to share unique photography of Prime being assembled, highlighting the main structural components of the launch vehicle in near-flight configuration.

These images are testament to the progress we had made, and demonstrate the technological advancement we were making on our #JourneytoLaunch

Read more here: https://t.co/MVt9n2uUsx

[Orbex Space @orbexspace]

Orbex today announced that it is in the process of appointing administrators after fundraising, merger and acquisition opportunities all concluded unsuccessfully.

Orbex has filed a Notice of Intention to Appointment Administrators and will continue trading while all options for the future of the company are explored, including potential sale of all or parts of its business or assets.

Read the full press statement here: https://t.co/YXPdYeDmel

[Orbex Space @orbexspace]

And that’s a wrap on 2025! 🎉

To our friends, partners, investors, and supporters — thank you for being part of the Orbex #JourneyToLaunch this year.

It’s been a transformative chapter for us: we’ve grown our team with exceptional new talent, secured funding to power the mission forward, earned pre-selection for the European Launcher Challenge (ELC), and shared some exciting behind-the-scenes glimpses of the technology driving Orbex Prime.

Your support means everything. Here’s to an even bigger year ahead — we can’t wait to share new milestones with you in 2026! 🚀

#TopLaunchTeam #LaunchUK #EuropeanLaunch

[Orbex Space @orbexspace]

Season’s Greetings from Team Orbex! 🎄✨

As we continue on our Journey to Launch, we’re grateful to everyone that's been part of our mission this year — our dedicated teams in Forres and Copenhagen, our valued partners and our supporters across the space industry and beyond.

#JourneyToLaunch #HappyHolidays

[Orbex Space @orbexspace]

We’re feeling festive in Forres and Copenhagen! 🎄

Yesterday, the team got into the spirit for Christmas Jumper Day, supporting @save_children and the work they do for children who need it most.

From cosy knits to festive treats, it was a brilliant way to raise awareness and spread some festive cheer. ✨

#JourneyToLaunch #TopLaunchTeam #ChristmasJumperDay

[Orbex Space @orbexspace]

We had a great reaction to our engine test video last week, so, here's a peak at our Prime launch vehicle hardware — a real testament to the skill of our team as we near the first test launch next year.

We are preparing every element of the vehicle, with much of the hardware ready now, and the rest in production, or test.

We purposefully included innovation and novelty in the design of Prime, this brought many challenges for us to overcome, and we are now realising the design in physical form.

But Prime isn’t just another rocket — it's redefining small-satellite launch. Click here to find out how: https://t.co/moQwGtVZDF

#JourneyToLaunch #Innovation #CarbonFibre #OrbexPrime #EuropeanSpace #LaunchUK

[Orbex Space @orbexspace]

The team is working tirelessly on our testing programme as we prepare for our first test launch of Orbex Prime.

We know many of you are curious about what’s happening behind the scenes and what our Tech teams are working on - so today we’re proud to share a glimpse of the some of the engine testing that’s driving our launch vehicle development forward.

This is just one of the many steps on our #JourneyToLaunch, and we’re very happy to have you with us on the journey. Thank you for your support!

#EngineRoar #RocketEngines #OrbexPrime #LaunchUK #EuropeanLaunch

[Orbex Space @orbexspace]

Just one week to go until @SpaceTechExpoEU in Bremen! 🚀

Catch our CEO, Phil Chambers, on the panel “European Launcher Challenge: A New Paradigm for Scale-Up Support” on 19 November at 11:15.

Want to connect with the Orbex team while you’re there? Drop us a line at [email protected]
to book a meeting.

We’re looking forward to an inspiring week in Bremen — see you soon!

#JourneyToLaunch #EuropeanLaunch #SpaceTechExpo

[Orbex Space @orbexspace]

Last week, our Chief of Structures, Jesus San Juan, joined the “Enabling Synergies: FLPP’s Role in Linking the Value Chain” panel at the @esa Future Space Transportation Autumn Session - an important event hosted by ESA’s Directorate of Space Transportation in the lead-up to the ESA Ministerial Council (CM25) in 2025.

Jesus discussed how Orbex is delivering dedicated, flexible, and sustainable orbital launch services, and highlighted our disruptive technologies in structural optimisation - including Carbon Fiber-Reinforced Polymer (CFRP) structures using Rapid Tow Shearing (RTS), lattice structures, and linerless composite overwrapped pressure vessels (Type V COPVs).

He also shared innovations in shockless separation systems for fairing and staging, mass-optimised propellant tanks made from high-performance stainless-steel alloys, and advanced welding techniques. Orbex’s focus on reutilisation technologies — such as landing leg structures, embedded FBG sensors, and integrated cooling systems — highlighting the need for rapid subcontractor support, continued ESA test and flight demonstration opportunities, and our wider contribution to advancing Europe’s access to space.

Learn more about our journey and innovations at https://t.co/i8M4RixN2z

@ESA_transport

#JourneyToLaunch #EuropeanLaunch #Innovation #SpaceTransportation #OrbexTech #StructuresInnovation #AdvancedMaterials #COPV #ESA #CM25

[Orbex Space @orbexspace]

The Orbex team got into the Halloween spirit today with treats, games, and a best dressed competition!

Wishing everyone a spooky celebration this Halloween👻🎃

#JourneyToLaunch #SpookySpace

[Orbex Space @orbexspace]

The countdown is on for @SpaceTechExpoEU in Bremen! 🚀

Meet the Orbex team from 18–20 November at Booth E50, or email [email protected] to arrange a meeting.

Don’t miss our CEO, Phil Chambers, speaking on the SmallSats Industry Panel – “European Launcher Challenge: A New Paradigm for Scale-Up Support” – on 19 November at 11:15 for key insights into Europe’s evolving launch landscape.

#JourneyToLaunch #SpaceTechExpo #EuropeanLaunch

[Orbex Space @orbexspace]

It was World Mental Health Day last week and the Orbex Team were busy!

We marked the day with coffee and cakes, a team walk, an inspiring talk from @WellbeingMoray and a colourful outfit competition.

These activities reflect our ongoing commitment to prioritising mental health at work and helping to break down the stigma surrounding it.

A huge thank you to the Orbex team for coming together to raise awareness on such an important day.

#JourneyToLaunch #TeamOrbex #LifeAtOrbex

[Orbex Space @orbexspace]

We've teamed up with iconic restaurant brand @SixbyNico to sample their out-of-this-world menu!

Eight members of the Orbex Team – working on the development of Orbex Prime – traded the launchpad for the dinner table to taste Six by Nico’s new space-themed menu at its Aberdeen venue.

Read more about the exciting collaboration here: https://t.co/M5KBii8JJy

#JourneyToLaunch #TeamOrbex

[Orbex Space @orbexspace]

Happy World Space Week! 🚀

The Orbex team has been out supporting the celebration:
✨ At Kinloss Primary, we launched rockets with the P7 class and shared how the next generation can find their future in space.
✨ At the Women in STEM event in Edinburgh, we highlighted how Orbex is opening doors for women in the space industry – including our Women of Orbex network, which celebrates achievements, builds connections, and provides inspiration.

We’re proud to support the future of space – and the people who will shape it.

Find out more: https://t.co/flrz0BXLBl

#JourneyToLaunch #STEMOutreach #TeamOrbex #WorldSpaceWeek

[Orbex Space @orbexspace]

Say hello to Nic 👋 Our Structures Manufacturing Lead and the latest face of our People Behind Prime series!

From our HQ in Forres, Nic heads up the team that turns rocket designs into reality — building and integrating complex carbon fibre structures, creating specialist tooling, and working side-by-side with our design team to make Orbex Prime launch-ready. 🚀

Fancy being part of the journey? Explore our current roles: https://t.co/U0ZVjgo9qw

#JourneyToLaunch #LifeAtOrbex #BehindPrime

[Orbex Space @orbexspace]

Today our Forres team came together for a @macmillancancer Coffee Morning ☕💚

From home bakes to donations, it was a chance to connect, share, and support an important cause that helps people affected by cancer. A big thank you to everyone who got involved!

#JourneyToLaunch #TeamOrbex #LifeAtOrbex

[Orbex Space @orbexspace]

Meet Charlotte, one of our talented Mechanical Engineers and the latest star of our People Behind Prime series!

Watch the video here: https://t.co/2rbGAy0O20

#JourneyToLaunch #TopLaunchTeam #LifeAtOrbex

[Orbex Space @orbexspace]

It’s Company Culture Day! 🚀 At Orbex, our Vision, Mission & Values guide how we work, innovate, and support each other as we prepare to launch. They’re at the heart of everything we do: https://t.co/vtvqtKg3yD

#JourneyToLaunch #TeamOrbex #LifeAtOrbex