pete parisi

.

[pete parisi @parisipete]

Fitting bearings into the side brackets of the marble run elevator. Also reducing the size of a dowel to fit the bearings. I don’t have a lathe so trying a few different techniques. @ Los Gatos, California https://t.co/LoqLiMwrBv

[pete parisi @parisipete]

Milling a bracket as part of the marble corkscrew elevator. Still impressed by how accurate and precise the @avidcnc mills parts. Model created using @adskfusion360 and milled from @balticbirchplywood 1/2”. https://t.co/Y88Jk3s80W

[pete parisi @parisipete]

Marble run cork screw elevator came out great. Doing some finish sanding then need to add gears and a motor to it so it can spin. This was milled on an @avidcnc out of Baltic birch plywood using @amanatool Spectra bits. https://t.co/vZkWGYdPDh

[pete parisi @parisipete]

Just posted a video @ Los Gatos, California https://t.co/W0ZsP6fHQT

[pete parisi @parisipete]

Just posted a video @ Los Gatos, California https://t.co/mYoTFRh4ux

[pete parisi @parisipete]

Just posted a photo @ Los Gatos, California https://t.co/LiSVxcMWMj

[pete parisi @parisipete]

Plan isn’t working out as intended. Piece alignment on the CNC is off on the Y axis about 1/4”, not sure why. Going to keep trying but it’s tough with such a small workpiece. @ Los Gatos, California https://t.co/H9ZdBbfVNt

[pete parisi @parisipete]

Just posted a photo @ Los Gatos, California https://t.co/waihJ9rlTK

[pete parisi @parisipete]

Subfloor is done. Hired some help with the project also. Always good to have some support 👍 Waiting on the tile and show pan orders. More work soon ⭐️ @ Los Gatos, California https://t.co/s7iz0M220X

[pete parisi @parisipete]

Sunken subfloor framing done. Sinking the subfloor so it’s level with the top of the joists to gain 3/4” to accommodate the @schlutersystemsna Kerdi shower pan. @ Los Gatos, California https://t.co/cxmV90gExe

[pete parisi @parisipete]

Not much water damage to the sub floor. Very happy it wasn’t a more serious leak 👍 @ Los Gatos, California https://t.co/qJgZxPz5zL

[pete parisi @parisipete]

Just posted a video @ Los Gatos, California https://t.co/5mWLBd1qxf

[pete parisi @parisipete]

Shower leak looking worse he more I dig into it. It’s wet all the way to the back corner. 😩 @ Los Gatos, California https://t.co/4nu4oSBAOL

[pete parisi @parisipete]

Just posted a photo @ Los Gatos, California https://t.co/mTcAzk1Pyr

[pete parisi @parisipete]

Just posted a photo @ Los Gatos, California https://t.co/mBvvQtnXqL

[pete parisi @parisipete]

Just posted a photo @ Los Gatos, California https://t.co/3RmVV7rb3A

[pete parisi @parisipete]

First TIG welded marble run rail. Still learning how to TIG weld so improvement needed. Another big thanks to @vice_chief for all the welding tips 👍. @ Los Gatos, California https://t.co/yKD4kNXWud

[pete parisi @parisipete]

Doing a test on the @avidcnc creating a spiral shape for the marble run. Just a quick roughing pass. Final will be a lot smoother. @ Los Gatos, California https://t.co/7Z1fgYebdK

[pete parisi @parisipete]

Just posted a photo @ Los Gatos, California https://t.co/KZ87LURLRG

[pete parisi @parisipete]

Needed a way to hold the metal crosspiece to the rails during TIG welding. Steve @makingathome showed me some of his previous marble machine work for inspiration. Thanks for the help Steve! @ Los Gatos, California https://t.co/REJh4xXadh