Plural AM

Integrating any #3ntr #3Dprinter for businesses that need large, precise builds for a low cost per part. #additivemanufacturing #rapidprototyping

[Plural AM @plural_am]

FDM/FFF can do way more than you think!

[Peter Zelinski @AMPeterZelinski]

Can you do topology optimization with FFF? See this example by ⁦@plural_am⁩. #RAPIDevent #RAPIDTCT

[3ntr @3ntr_Official]

We thank @fabbaloo for this in-depth study that takes its cue from 3D printed pumps to tell the commitment of BALENCIAGA, shared by #3ntr, in providing the luxury #fashion market with uncompromising #style, respecting environmental and social challenges
▶ https://t.co/zmI7mXKTy1

[Plural AM @plural_am]

#PPE in a pinch created by DominionAirMach with @3ntr_official industrial #3dprinter. See the full story at https://t.co/xcEO1hXqXA

[3ntr @3ntr_Official]

@DominionAirMach engaged in the front row in the creation of individual protection supports with 3ntr industrial grade technology.
Get closer and find out how 3ntr #additive technology works!
https://t.co/6wiLAXmviR

_
#3ntr #notoyshere #3dprinting #3dprinters #stampa3d

[Plural AM @plural_am]

What are your working on in #3dprinting? #threadedinserts would probably help tie it together. Plural's technical guru Tom shows you how easy it is place a brass insert in a #3dprinted enclosure. https://t.co/aib0TRnyS5

[3ntr @3ntr_Official]

#Beinspired - F.A.M.S. is another good example of a company aiming for #innovation. The company started the replacement process by adopting a bright orange color for all the details obtained with #3ntr #industrial #3Dsystems.
Find more amazing stories: https://t.co/UxCy6FCOsW

[3ntr @3ntr_Official]

Another truly inspiring example of #workshop 4.0.
A small space, with the right #additivemanufacturing industrial grade #technologies and high performance materials, can often be enough to revolutionize your #production model.
_
#3ntr #notoyshere #rapidprototyping #3dprinters

[Plural AM @plural_am]

Don’t miss Plural Additive Manufacturing's presentation at the @Dyndrite Developer Council 2020: Delivering the Future of Additive Manufacturing from Ed Israel, President, including a preview of the Spectral 30. Watch Now: https://t.co/0V2ynRPBGl #DDC2020 #3ntr #notoyshere

[Plural AM @plural_am]

#3ntr partners continue to expand across the world...

#notoyshere

[3ntr @3ntr_Official]

#3DPrinting news briefs: 3ntr expanding network to support the industry.
Click here to ready the complete article: https://t.co/p6W0rmQ4of

_
#3ntr #notoyshere #AMindustrialgrade #3dprinters #3dprint #pressrelease #news #additivemanufacturing

[RSNA @RSNA]

Our #3DPrinting Special Interest Group is hosting a webinar today focusing on 3D printing of personal protective equipment (#PPE) and other devices in response to critical shortages during the #COVID19 pandemic. Starts at 12 PM CST: https://t.co/ioxB44SiDD #informatics

[Beth Ripley, MD PhD @bethannripley]

Masks got you confused? You are not alone! Here we break down some of the main categories of masks and respirators that you might encounter on the #3DPrintExchange, along with the @US_FDA requirements and just who can manufacture them. @VHAInnovation @NIH3Dprint @AmericaMakes

[Plural AM @plural_am]

Want to know more about the @3ntr_Official #Spectral30 for #3dprinting #PEEK #PEKK #Ultem and more? Then meet #plural_am in the #ddc2020 lounge here: https://t.co/77cjsC9xEy

[Plural AM @plural_am]

Missing Rapid 2020? The good people @Dyndrite have #ddc2020 where we debuted the @3ntr_Official #Spectral30 PEEK #3dprinter - Preview here: https://t.co/PSfo3ebFn6

[Plural AM @plural_am]

@3ntr_Official describes its #additivemanufacturing efforts in #Italy to fight #covid19 and offers business insight on future. Thanks @SarahGoehrke and @fabbaloo for sharing!

[Plural AM @plural_am]

@pbates185 - can you help @bethannripley re: VOC safety on #3dprinting face mask designs?

[Beth Ripley, MD PhD @bethannripley]

#3DPrinting Community: I need your help. We are trying to evaluate multiple 3D printed face mask designs for community (non-Hospital) use. Here is our concern: what if the plastics that are used in FDM and SLA printing are releasing #VOC? ESP concerning as this is on the face...

[Beth Ripley, MD PhD @bethannripley]

final few tests on the 3D printed mask. Here we are testing for mask “breathability”. The ASTM standard measures the pressure differential across the mask. Lower diff means it feels easier to breath. We performed 2 min of CPR while wearing the mask as a proxy. @VHAInnovation

[Lauralyn McDaniel @MfgGeek]

Looking for #3dprinting resources to respond to #COVID19? Growing collection & scheduled discussions can be found here: https://t.co/g1ZcIzBoXk

[3ntr @3ntr_Official]

Valves for respirators with #3dprinters: our printers engaged together with the University of Pavia in aid of the S. Matteo Hospital, the concrete contribution of #3dprinting in the struggle for #life
_
#3ntr #notoyshere #coronavirus #3dprint #additivemanufacturing #medicaldevice

[Plural AM @plural_am]

Work at a #hospital amd need to speak #manufacturing? Are you one of the #NursesWhoTweet amd ]]e for #Covid19? Speak our lingo.

[Plural AM @plural_am]

FDA authorizes multiple patient ventilator tool.

[Peter Zelinski @AMPeterZelinski]

Is your 3D-printed PPE in use in hospitals?

Making parts is first step. I'd like to use our platform to showcase models of success where all steps have been met and healthcare workers now using rapidly made protective equipment.

Contact me. More info: https://t.co/ATcCG6zoXg