3D4M

We develop & manufacture high performance filaments.
Supporting over 100 universities.
Formerly 3D4Makers.

[3D4M @print3d4m]

3D4Makers is now 3D4M.

Same materials, same team, new identity. We continue to produce our engineering and high-performance filaments in Haarlem, the Netherlands.

This is a change of name and visual identity only.

https://t.co/e6NAQcfaAf

[3D4M @print3d4m]

We are excited to announce the launch of LUVOCOM 3F PAHT® CF 9742 BK, a carbon fiber-reinforced nylon 3D printing filament designed to meet the rigorous demands of industrial applications.

https://t.co/cJW6Hfn0Ul

[3D4M @print3d4m]

@properprinting @printablescom Thanks!

[3D4M @print3d4m]

Transforming imagination into reality with this stunning 3D-printed table! 🚀
Designed in Fusion 360 using generative design by the talented Carolo @printablescom. We used our Facilan™ C8 Black to print the parts and the 3D printed is from Schoone Lights .#3dprinting

[Jón Schone @properprinting]

I gave myself a teleprompter for Christmas to keep track of my bullet points during filming and made a fitting holder for it. Printed out of @3d4makers Hemp PLA which will soon be launched!

[3D4M @print3d4m]

3D-Printed PCL Scaffolds for Healing Severe Gum Disease. Read the article in link.

#3dprinting #additivemanufacturing #scaffolding #bioengineering #boneregeneration

https://t.co/t4XN9YFkzk

[3D4M @print3d4m]

@FilamentStories printed this beautiful architectural masterpiece designed by @miniworld3d with our Facilan™ C8 Filament 🤩

Check out Filamentstories for more fun content!

Iconic Architecture – Falling Water, in Miniature! https://t.co/ts22YLFvNo via @YouTube

[3D4M @print3d4m]

https://t.co/rPRxt2w2kI

The advent of new rapid prototyping techniques, like melt electrowriting, has revolutionized surgical mesh design. This breakthrough enables the creation of intricate geometries previously unattainable with conventional methods.

[3D4M @print3d4m]

FIS Robotics tested our Facilan™ C8 granulate for FGF printing on their robotic pellet 3D printer. We are very pleased with the feedback we have received from these and other parties! #3dprint #Robot

[3D4M @print3d4m]

Introducing R-PEEK filament, a high-performing recycled engineering thermoplastic that is excellently suited for high strength and high temperature 3D printing applications.

https://t.co/kSkNYCf1vG

[3D4M @print3d4m]

Revolutionizing Motor Neuron Disease (MND) Care with 3D Printing Technology. Researchers have designed two lattice structures inspired by silkworm cocoons, using 3D4Makers Facilan™ PCL100 filament as feedstock material.
https://t.co/oqjRgTPlbo

[Mehrshad Mehrpouya @MdMehrpouya]

Our proposal on the "Recycling of waste plastic into #3dprinting shape memory filament (#reSHAPE)" has been awarded #NWO! Looking forward to collaborating with our partners in this study @UTwente @3devohq @3d4makers #shapememorymaterials #additivemanufacturing

[3D4M @print3d4m]

Exciting news! After many requests we've expanded our Facilan™ C8 Filament range with the addition of the colour black. Just like the Natural Facilan™ C8 the new black colour has a smooth with an even matte surface finish.

https://t.co/lV0WE9titi

[Jón Schone @properprinting]

An @E3DOnline Revo Hemera XS with the Hemera interface, @dropeffect ring heater and @BondtechAB 1mm CHT nozzle. Printed the Luvocom PAHT CF from @3d4makers which is the strongest material I can print! Interesting combination.

[3DPrint @3DPrint_com]

@pilz: @LEGO_Group released a powder bed fusion pogo stick. @3DPrinterOS is turning to what it calls a blockchain-enabled NFT minting decentralized manufacturing network. @3d4makers @AON3D @HexagonAB & the Dutch Navy tested & released @Zymergen Z2 Polyimide as Ultem replacement.

[3DPrint @3DPrint_com]

4 firms partnered to demonstrate high isotropy & strength in a new #3Dprinting polyimide formulation. As @MikeMolitchHou reports, @Ginkgo subsidiary @Zymergen, @HexagonAB, @3d4makers, & @AON3D showed that a part made with Z2 Polyimide could withstand 432 kg of load before failure

[Ginkgo Bioworks @Ginkgo]

Exciting energy here at @formnext_expo. It is great to connect with the next generation of intelligent industrial production on additive manufacturing and industrial #3DPrinting. We are at Hall 12.1, Booth F31 with our partners @AON3D and @3d4makers.
#Formnext #Formnext22

[Ginkgo Bioworks @Ginkgo]

Our new colleagues from the @Zymergen 3D Printing team will be heading to @formnext_expo 2022 next week. See them at Hall 12.1, Booth F31 with collaborators @3d4makers and @AON3D https://t.co/Ff87GXMDIP #formnext

[Jón Schone @properprinting]

An FDM version of the Proper Extruder out of this fluor green PLA from @3d4makers. This is a 2.85mm version with an @E3DOnline V6 hotend for my upcoming video! Looks neat right?

[Zymergen @Zymergen]

You can now find Zymergen Z2 in @3d4makers's new high-performance polyimide filaments for use in #3Dprinting in the aerospace, transportation & automotive industries:
https://t.co/KOalzN6xu9